Hi Andre, On 28 February 2017 at 19:25, Andre Przywara <andre.przyw...@arm.com> wrote: > The generic ARMv8 assembly code contains routines for setting up > a CCN interconnect, though the Freescale SoCs are the only user. > Link this code only for Freescale targets, this saves some precious > bytes in the chronically tight SPL. > > Signed-off-by: Andre Przywara <andre.przyw...@arm.com> > --- > arch/arm/cpu/armv8/fsl-layerscape/Makefile | 1 + > arch/arm/lib/Makefile | 1 - > 2 files changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile > b/arch/arm/cpu/armv8/fsl-layerscape/Makefile > index c9ab93e..ca09973 100644 > --- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile > +++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile > @@ -7,6 +7,7 @@ > obj-y += cpu.o > obj-y += lowlevel.o > obj-y += soc.o > +obj-y += ccn504.o
Don't you need to move the file into the same directory? > obj-$(CONFIG_MP) += mp.o > obj-$(CONFIG_OF_LIBFDT) += fdt.o > obj-$(CONFIG_SPL) += spl.o > diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile > index 71de1ca..60ffb4a 100644 > --- a/arch/arm/lib/Makefile > +++ b/arch/arm/lib/Makefile > @@ -43,7 +43,6 @@ obj-y += stack.o > ifdef CONFIG_CPU_V7M > obj-y += interrupts_m.o > else ifdef CONFIG_ARM64 > -obj-y += ccn504.o > ifneq ($(CONFIG_GICV2)$(CONFIG_GICV3),) > obj-y += gic_64.o > endif > -- > 2.8.2 > Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot