The generic ARMv8 assembly code contains routines for setting up a CCN interconnect, though the Freescale SoCs are the only user. Link this code only for Freescale targets, this saves some precious bytes in the chronically tight SPL.
Signed-off-by: Andre Przywara <andre.przyw...@arm.com> --- arch/arm/cpu/armv8/fsl-layerscape/Makefile | 1 + arch/arm/lib/Makefile | 1 - 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile index c9ab93e..ca09973 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile +++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile @@ -7,6 +7,7 @@ obj-y += cpu.o obj-y += lowlevel.o obj-y += soc.o +obj-y += ccn504.o obj-$(CONFIG_MP) += mp.o obj-$(CONFIG_OF_LIBFDT) += fdt.o obj-$(CONFIG_SPL) += spl.o diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 71de1ca..60ffb4a 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -43,7 +43,6 @@ obj-y += stack.o ifdef CONFIG_CPU_V7M obj-y += interrupts_m.o else ifdef CONFIG_ARM64 -obj-y += ccn504.o ifneq ($(CONFIG_GICV2)$(CONFIG_GICV3),) obj-y += gic_64.o endif -- 2.8.2 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/listinfo/u-boot
