On 02/28/2017 08:25 PM, Andre Przywara wrote:
> At the moment we load two images from a FIT image: the actual U-Boot
> image and the DTB. Both times we have very similar code to deal with
> alignment requirement the media we load from imposes upon us.
> Factor out this code into a new function, which we just call twice.
> 
> Signed-off-by: Andre Przywara <andre.przyw...@arm.com>
> ---

Acked-by: Andrew F. Davis <a...@ti.com>

+Franklin,

This patch, and #12 look like something you would be interested in for
your 66AK2G0x work.

Andrew

>  common/spl/spl_fit.c | 129 
> +++++++++++++++++++++++----------------------------
>  1 file changed, 57 insertions(+), 72 deletions(-)
> 
> diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
> index 572a5db..ad5ba15 100644
> --- a/common/spl/spl_fit.c
> +++ b/common/spl/spl_fit.c
> @@ -18,7 +18,7 @@ static ulong fdt_getprop_u32(const void *fdt, int node, 
> const char *prop)
>  
>       cell = fdt_getprop(fdt, node, prop, &len);
>       if (len != sizeof(*cell))
> -             return -1U;
> +             return -1UL;
>       return fdt32_to_cpu(*cell);
>  }
>  
> @@ -139,19 +139,63 @@ static int get_aligned_image_size(struct spl_load_info 
> *info, int data_size,
>       return (data_size + info->bl_len - 1) / info->bl_len;
>  }
>  
> +static int spl_load_fit_image(struct spl_load_info *info, ulong sector,
> +                           void *fit, ulong base_offset, int node,
> +                           struct spl_image_info *image_info)
> +{
> +     ulong offset;
> +     size_t length;
> +     ulong load_addr, load_ptr, entry;
> +     void *src;
> +     ulong overhead;
> +     int nr_sectors;
> +     int align_len = ARCH_DMA_MINALIGN - 1;
> +
> +     offset = fdt_getprop_u32(fit, node, "data-offset") + base_offset;
> +     length = fdt_getprop_u32(fit, node, "data-size");
> +     load_addr = fdt_getprop_u32(fit, node, "load");
> +     if (load_addr == -1UL && image_info)
> +             load_addr = image_info->load_addr;
> +     load_ptr = (load_addr + align_len) & ~align_len;
> +     entry = fdt_getprop_u32(fit, node, "entry");
> +
> +     overhead = get_aligned_image_overhead(info, offset);
> +     nr_sectors = get_aligned_image_size(info, length, offset);
> +
> +     if (info->read(info, sector + get_aligned_image_offset(info, offset),
> +                    nr_sectors, (void*)load_ptr) != nr_sectors)
> +             return -EIO;
> +     debug("image: dst=%lx, offset=%lx, size=%lx\n", load_ptr, offset,
> +           (unsigned long)length);
> +
> +     src = (void *)load_ptr + overhead;
> +#ifdef CONFIG_SPL_FIT_IMAGE_POST_PROCESS
> +     board_fit_image_post_process(&src, &length);
> +#endif
> +
> +     memcpy((void*)load_addr, src, length);
> +
> +     if (image_info) {
> +             image_info->load_addr = load_addr;
> +             image_info->size = length;
> +             if (entry == -1UL)
> +                     image_info->entry_point = load_addr;
> +             else
> +                     image_info->entry_point = entry;
> +     }
> +
> +     return 0;
> +}
> +
>  int spl_load_simple_fit(struct spl_image_info *spl_image,
>                       struct spl_load_info *info, ulong sector, void *fit)
>  {
>       int sectors;
> -     ulong size, load;
> +     ulong size;
>       unsigned long count;
> +     struct spl_image_info image_info;
>       int node, images;
> -     void *load_ptr;
> -     int fdt_offset, fdt_len;
> -     int data_offset, data_size;
>       int base_offset, align_len = ARCH_DMA_MINALIGN - 1;
> -     int src_sector;
> -     void *dst, *src;
>  
>       /*
>        * Figure out where the external images start. This is the base for the
> @@ -203,82 +247,23 @@ int spl_load_simple_fit(struct spl_image_info 
> *spl_image,
>               return -1;
>       }
>  
> -     /* Get its information and set up the spl_image structure */
> -     data_offset = fdt_getprop_u32(fit, node, "data-offset");
> -     data_size = fdt_getprop_u32(fit, node, "data-size");
> -     load = fdt_getprop_u32(fit, node, "load");
> -     debug("data_offset=%x, data_size=%x\n", data_offset, data_size);
> -     spl_image->load_addr = load;
> -     spl_image->entry_point = load;
> +     /* Load the image and set up the spl_image structure */
> +     spl_load_fit_image(info, sector, fit, base_offset, node, spl_image);
>       spl_image->os = IH_OS_U_BOOT;
>  
> -     /*
> -      * Work out where to place the image. We read it so that the first
> -      * byte will be at 'load'. This may mean we need to load it starting
> -      * before then, since we can only read whole blocks.
> -      */
> -     data_offset += base_offset;
> -     sectors = get_aligned_image_size(info, data_size, data_offset);
> -     load_ptr = (void *)load;
> -     debug("U-Boot size %x, data %p\n", data_size, load_ptr);
> -     dst = load_ptr;
> -
> -     /* Read the image */
> -     src_sector = sector + get_aligned_image_offset(info, data_offset);
> -     debug("Aligned image read: dst=%p, src_sector=%x, sectors=%x\n",
> -           dst, src_sector, sectors);
> -     count = info->read(info, src_sector, sectors, dst);
> -     if (count != sectors)
> -             return -EIO;
> -     debug("image: dst=%p, data_offset=%x, size=%x\n", dst, data_offset,
> -           data_size);
> -     src = dst + get_aligned_image_overhead(info, data_offset);
> -
> -#ifdef CONFIG_SPL_FIT_IMAGE_POST_PROCESS
> -     board_fit_image_post_process((void **)&src, (size_t *)&data_size);
> -#endif
> -
> -     memcpy(dst, src, data_size);
> -
>       /* Figure out which device tree the board wants to use */
>       node = spl_fit_get_image_node(fit, images, FIT_FDT_PROP, 0);
>       if (node < 0) {
>               debug("%s: cannot find FDT node\n", __func__);
>               return node;
>       }
> -     fdt_offset = fdt_getprop_u32(fit, node, "data-offset");
> -     fdt_len = fdt_getprop_u32(fit, node, "data-size");
> -
> -     /*
> -      * Read the device tree and place it after the image. There may be
> -      * some extra data before it since we can only read entire blocks.
> -      * And also align the destination address to ARCH_DMA_MINALIGN.
> -      */
> -     dst = (void *)((load + data_size + align_len) & ~align_len);
> -     fdt_offset += base_offset;
> -     sectors = get_aligned_image_size(info, fdt_len, fdt_offset);
> -     src_sector = sector + get_aligned_image_offset(info, fdt_offset);
> -     count = info->read(info, src_sector, sectors, dst);
> -     debug("Aligned fdt read: dst %p, src_sector = %x, sectors %x\n",
> -           dst, src_sector, sectors);
> -     if (count != sectors)
> -             return -EIO;
>  
>       /*
> -      * Copy the device tree so that it starts immediately after the image.
> -      * After this we will have the U-Boot image and its device tree ready
> -      * for us to start.
> +      * Read the device tree and place it after the image.
> +      * Align the destination address to ARCH_DMA_MINALIGN.
>        */
> -     debug("fdt: dst=%p, data_offset=%x, size=%x\n", dst, fdt_offset,
> -           fdt_len);
> -     src = dst + get_aligned_image_overhead(info, fdt_offset);
> -     dst = load_ptr + data_size;
> -
> -#ifdef CONFIG_SPL_FIT_IMAGE_POST_PROCESS
> -     board_fit_image_post_process((void **)&src, (size_t *)&fdt_len);
> -#endif
> -
> -     memcpy(dst, src, fdt_len);
> +     image_info.load_addr = spl_image->load_addr + spl_image->size;
> +     spl_load_fit_image(info, sector, fit, base_offset, node, &image_info);
>  
>       return 0;
>  }
> 
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/listinfo/u-boot

Reply via email to