> -----Original Message----- > From: Pratiyush Srivastava > Sent: Tuesday, August 09, 2016 11:45 AM > To: york sun <york....@nxp.com>; u-boot@lists.denx.de > Cc: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> > Subject: RE: [PATCH][v2] board: ls1012afrdm: overwrite > CONFIG_EXTRA_ENV_SETTINGS > > > > > -----Original Message----- > > From: york sun > > Sent: Friday, August 05, 2016 10:54 PM > > To: Pratiyush Srivastava <pratiyush.srivast...@nxp.com>; u- > > b...@lists.denx.de > > Cc: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> > > Subject: Re: [PATCH][v2] board: ls1012afrdm: overwrite > > CONFIG_EXTRA_ENV_SETTINGS > > > > On 08/05/2016 02:47 AM, Pratiyush Mohan Srivastava wrote: > > > From: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> > > > > > > LS1012AFRDM has 512MB of DDR. > > > So update Kernel load address as 0x96000000 instead of default > > > 0xa0000000. > > > > > > Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> > > > Signed-off-by: Pratiyush Mohan Srivastava > > > <pratiyush.srivast...@nxp.com> > > > --- > > > Changes for v2: Incorporated York's comments > > > - Removed ramdisk_addr, ramdisk_size > > > - Updated UART baud-rate. > > > > > > include/configs/ls1012afrdm.h | 14 ++++++++++++++ > > > 1 file changed, 14 insertions(+) > > > > > > diff --git a/include/configs/ls1012afrdm.h > > > b/include/configs/ls1012afrdm.h index ad81142..f2c6ca8 100644 > > > --- a/include/configs/ls1012afrdm.h > > > +++ b/include/configs/ls1012afrdm.h > > > @@ -39,4 +39,18 @@ > > > #define CONFIG_SYS_MEMTEST_START 0x80000000 > > > #define CONFIG_SYS_MEMTEST_END 0x9fffffff > > > > > > +#undef CONFIG_EXTRA_ENV_SETTINGS > > > +#define CONFIG_EXTRA_ENV_SETTINGS \ > > > + "initrd_high=0xffffffff\0" \ > > > > What is this? > [Pratiyush>] I used the LS1043 dts as the base for this dts. Since ls10143 had > this parameter, I copied the same for LS1012. [Pratiyush>] I used the LS10143a_common file as a base for this dts. Since ls10143 had > this parameter, I copied the same for LS1012. Please ignore the previous comment . > > > > > + "verify=no\0" \ > > > + "hwconfig=fsl_ddr:bank_intlv=auto\0" \ > > > + "loadaddr=0x80100000\0" \ > > > + "kernel_addr=0x100000\0" \ > > > + "fdt_high=0xffffffffffffffff\0" \ > > > + "initrd_high=0xffffffffffffffff\0" \ > > > + "kernel_start=0xa00000\0" \ > > > + "kernel_load=0x96000000\0" \ > > > + "kernel_size=0x2800000\0" \ > > > + "console=ttyAMA0,115200n8\0" > > > > Do you really use ttyAMA0? Isn't it ttyS0? > [Pratiyush>] I will remove the redundant console command. > > > > York
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
