Remove ramdisk_addr, ramdisk_size and update UART baud-rate.
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com>
Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivast...@nxp.com>
---
include/configs/ls1012a_common.h | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index fba2fac..78f4f9b 100644
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -111,14 +111,12 @@
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"loadaddr=0x80100000\0" \
"kernel_addr=0x100000\0" \
- "ramdisk_addr=0x800000\0" \
- "ramdisk_size=0x2000000\0" \
"fdt_high=0xffffffffffffffff\0" \
"initrd_high=0xffffffffffffffff\0" \
"kernel_start=0xa00000\0" \
"kernel_load=0xa0000000\0" \
"kernel_size=0x2800000\0" \
- "console=ttyAMA0,38400n8\0"
+ "console=ttyAMA0,115200n8\0"
#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \
"earlycon=uart8250,mmio,0x21c0500"
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
