On 08/05/2016 02:47 AM, Pratiyush Mohan Srivastava wrote:
> From: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com>
>
> LS1012AFRDM has 512MB of DDR.
> So update Kernel load address as 0x96000000 instead of default
> 0xa0000000.
>
> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com>
> Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivast...@nxp.com>
> ---
> Changes for v2: Incorporated York's comments
>       - Removed ramdisk_addr, ramdisk_size
>       - Updated UART baud-rate.
>
> include/configs/ls1012afrdm.h | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
>
> diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h
> index ad81142..f2c6ca8 100644
> --- a/include/configs/ls1012afrdm.h
> +++ b/include/configs/ls1012afrdm.h
> @@ -39,4 +39,18 @@
>  #define CONFIG_SYS_MEMTEST_START     0x80000000
>  #define CONFIG_SYS_MEMTEST_END               0x9fffffff
>
> +#undef CONFIG_EXTRA_ENV_SETTINGS
> +#define CONFIG_EXTRA_ENV_SETTINGS            \
> +     "initrd_high=0xffffffff\0"              \

What is this?

> +     "verify=no\0"                           \
> +     "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
> +     "loadaddr=0x80100000\0"                 \
> +     "kernel_addr=0x100000\0"                \
> +     "fdt_high=0xffffffffffffffff\0"         \
> +     "initrd_high=0xffffffffffffffff\0"      \
> +     "kernel_start=0xa00000\0"               \
> +     "kernel_load=0x96000000\0"              \
> +     "kernel_size=0x2800000\0"               \
> +     "console=ttyAMA0,115200n8\0"

Do you really use ttyAMA0? Isn't it ttyS0?

York

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to