> -----Original Message-----
> From: york sun
> Sent: Friday, August 05, 2016 9:47 PM
> To: Pratiyush Srivastava <pratiyush.srivast...@nxp.com>; u-
> b...@lists.denx.de
> Cc: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com>
> Subject: Re: [PATCH] armv8: ls1012a: Updating
> CONFIG_EXTRA_ENV_SETTINGS
> 
> On 08/05/2016 02:47 AM, Pratiyush Mohan Srivastava wrote:
> > Remove ramdisk_addr, ramdisk_size and update UART baud-rate.
> >
> > Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com>
> > Signed-off-by: Pratiyush Mohan Srivastava
> <pratiyush.srivast...@nxp.com>
> > ---
> >  include/configs/ls1012a_common.h | 4 +---
> >  1 file changed, 1 insertion(+), 3 deletions(-)
> >
> > diff --git a/include/configs/ls1012a_common.h
> b/include/configs/ls1012a_common.h
> > index fba2fac..78f4f9b 100644
> > --- a/include/configs/ls1012a_common.h
> > +++ b/include/configs/ls1012a_common.h
> > @@ -111,14 +111,12 @@
> >     "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
> >     "loadaddr=0x80100000\0"                 \
> >     "kernel_addr=0x100000\0"                \
> > -   "ramdisk_addr=0x800000\0"               \
> > -   "ramdisk_size=0x2000000\0"              \
> >     "fdt_high=0xffffffffffffffff\0"         \
> >     "initrd_high=0xffffffffffffffff\0"      \
> >     "kernel_start=0xa00000\0"               \
> >     "kernel_load=0xa0000000\0"              \
> >     "kernel_size=0x2800000\0"               \
> > -   "console=ttyAMA0,38400n8\0"
> > +   "console=ttyAMA0,115200n8\0"
> 
> Is console variable correct here?
[Pratiyush>] I will remove it ...
> 
> >
> >  #define CONFIG_BOOTARGS            "console=ttyS0,115200
> root=/dev/ram0 " \
> 
> console is different here.
> 
> 
> >                             "earlycon=uart8250,mmio,0x21c0500"
> >
> 
> York

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to