On 03/18/2016 08:06 PM, Michael Haas wrote: > On 03/18/2016 08:02 PM, Karsten Merker wrote: >> The installer supports a number of systems that can only load images >> of limited size, therefore the installer includes only an >> installation-related subset of all the kernel modules and i2c-mv64xxx >> currently isn't among those. This hasn't been a practical problem up >> to now, but being able to talk to the pmic is indeed something that >> should be possible even in the installer. I'll try to address that in >> the next days. Regards, Karsten > Just an anecdote: I loaded i2c-mv64xx.ko which I had extracted from the > deb and the olinuxino locked up.
Just for the record: loading i2c-mv64xx.ko reproducibly hangs my Debian Jessie install with the 4.3.0-0.bpo.1-armmp-lpae kernel. This happens only on u-boot 2016.01; both Debian stable 2014.10 and my own build of 2016.03 + patches work fine! So no problem since it's fixed on newer builds. Just a note for those playing along at home and wondering why their olinuxino does not come up anymore with 2016.01. > > So now I'm trying to reproduce broken GBit, which is harder than > expected. I managed to do it once right after the lockup in u-boot: tftp > was slow and ran into timeouts. Then I typed 'reset' in the u-boot > shell. u-boot started again and GBit was working again. > > Weird. > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
