Hi,
On 19-03-16 09:39, François-David Collin wrote:
Hi,
As I’m banging my head on this too, please allow me to provide some details
I got two stable situations :
The Lime2 is connected directly to the Gbit interface of my laptop, speed are
OK:
Michael Haas' work to debug this by looking at the phy registers
seems to be the most promising so-far, the clk reg and axp209
registers all seem to be identical between good and bad setups.
Can you try to:
1) Stop the boot in u-boot (press a key on the serial console)
2) Bring up the network, e.g. type "dhcp" then ctrl+c when it tries
to tftp
3) Do: "mii read 1 0x11" in u-boot and record the output ?
Regards,
Hans
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
