Hi Stefano, Peng, Fabio, all, Sorry for seeing this only now, but...
On Sun, Sep 20, 2015 at 9:43 AM, Stefano Babic <sba...@denx.de> wrote: > > > On 14/09/2015 07:34, Peng Fan wrote: >> When setting iomux for a pin mux, there is no need to check mux_ctrl_ofs. This assumption is wrong. This check was there for a reason. Some i.MX SoCs have some registers controlling pads but not muxes, either for a single pin or for groups of pins: http://git.denx.de/?p=u-boot/u-boot-imx.git;a=blob;f=arch/arm/include/asm/arch-mx25/iomux-mx25.h;h=220cf4ef2e94aa69482557852ed0cc0690a79cec;hb=HEAD http://git.denx.de/?p=u-boot/u-boot-imx.git;a=blob;f=arch/arm/include/asm/arch-mx35/iomux-mx35.h;h=5898b46f4720088b18882e21d0d2424fff987ab5;hb=HEAD http://git.denx.de/?p=u-boot/u-boot-imx.git;a=blob;f=arch/arm/include/asm/arch-mx5/iomux-mx51.h;h=b7b169505f91c4a213be59efca47e8a5aed770e7;hb=HEAD I have not checked whether these cases are currently used in-tree by U-Boot, but they have to be possible anyway in order to support these SoCs. >> Also If still checking mux_ctrl_ofs, we have no chance to set iomux >> for i.MX7D IOMUXC_LPSR_SW_MUX_CTL_PAD_GPIO1_IO00, because the mux_ctrl_ofs >> for this register is 0. The need is clear, but then the test mechanism should be changed, not removed. You could find a free bit in mux_ctrl_ofs or in mux_mode or elsewhere in IOMUX_PAD (e.g. bit 63, which is currently reserved), something like NO_PAD_CTRL, or create a reserved value other than __NA_ for mux_ctrl_ofs/mux_mode. >> Signed-off-by: Peng Fan <peng....@freescale.com> >> Cc: Stefano Babic <sba...@denx.de> >> Cc: Fabio Estevam <fabio.este...@freescale.com> >> --- >> arch/arm/imx-common/iomux-v3.c | 3 +-- >> 1 file changed, 1 insertion(+), 2 deletions(-) >> >> diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c >> index b4f481f..9b9cf58 100644 >> --- a/arch/arm/imx-common/iomux-v3.c >> +++ b/arch/arm/imx-common/iomux-v3.c >> @@ -53,8 +53,7 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad) >> } >> #endif >> >> - if (mux_ctrl_ofs) >> - __raw_writel(mux_mode, base + mux_ctrl_ofs); >> + __raw_writel(mux_mode, base + mux_ctrl_ofs); >> >> if (sel_input_ofs) >> __raw_writel(sel_input, base + sel_input_ofs); >> > > Applied (whole series) to u-boot-imx, thanks ! Please fix. Best regards, Benoît _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot