On 14/09/2015 07:34, Peng Fan wrote: > When setting iomux for a pin mux, there is no need to check mux_ctrl_ofs. > Also If still checking mux_ctrl_ofs, we have no chance to set iomux > for i.MX7D IOMUXC_LPSR_SW_MUX_CTL_PAD_GPIO1_IO00, because the mux_ctrl_ofs > for this register is 0. > > Signed-off-by: Peng Fan <peng....@freescale.com> > Cc: Stefano Babic <sba...@denx.de> > Cc: Fabio Estevam <fabio.este...@freescale.com> > --- > arch/arm/imx-common/iomux-v3.c | 3 +-- > 1 file changed, 1 insertion(+), 2 deletions(-) > > diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c > index b4f481f..9b9cf58 100644 > --- a/arch/arm/imx-common/iomux-v3.c > +++ b/arch/arm/imx-common/iomux-v3.c > @@ -53,8 +53,7 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad) > } > #endif > > - if (mux_ctrl_ofs) > - __raw_writel(mux_mode, base + mux_ctrl_ofs); > + __raw_writel(mux_mode, base + mux_ctrl_ofs); > > if (sel_input_ofs) > __raw_writel(sel_input, base + sel_input_ofs); >
Applied (whole series) to u-boot-imx, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
