When setting iomux for a pin mux, there is no need to check mux_ctrl_ofs.
Also If still checking mux_ctrl_ofs, we have no chance to set iomux
for i.MX7D IOMUXC_LPSR_SW_MUX_CTL_PAD_GPIO1_IO00, because the mux_ctrl_ofs
for this register is 0.

Signed-off-by: Peng Fan <peng....@freescale.com>
Cc: Stefano Babic <sba...@denx.de>
Cc: Fabio Estevam <fabio.este...@freescale.com>
---
 arch/arm/imx-common/iomux-v3.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c
index b4f481f..9b9cf58 100644
--- a/arch/arm/imx-common/iomux-v3.c
+++ b/arch/arm/imx-common/iomux-v3.c
@@ -53,8 +53,7 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
        }
 #endif
 
-       if (mux_ctrl_ofs)
-               __raw_writel(mux_mode, base + mux_ctrl_ofs);
+       __raw_writel(mux_mode, base + mux_ctrl_ofs);
 
        if (sel_input_ofs)
                __raw_writel(sel_input, base + sel_input_ofs);
-- 
1.8.4


_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to