On Mon, Sep 14, 2015 at 2:34 AM, Peng Fan <peng....@freescale.com> wrote:
> When setting iomux for a pin mux, there is no need to check mux_ctrl_ofs.
> Also If still checking mux_ctrl_ofs, we have no chance to set iomux
> for i.MX7D IOMUXC_LPSR_SW_MUX_CTL_PAD_GPIO1_IO00, because the mux_ctrl_ofs
> for this register is 0.
>
> Signed-off-by: Peng Fan <peng....@freescale.com>
> Cc: Stefano Babic <sba...@denx.de>
> Cc: Fabio Estevam <fabio.este...@freescale.com>

Tested-by: Fabio Estevam <fabio.este...@freescale.com>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to