Kazuaki Ichinohe wrote: > Hi Anatolij, Stefan, > > Thank you for the reply. > I confirmed your patch source. > However, the exception was generated. > > ------------------------------------------------ > U-Boot 2009.01 ( 3月 19 2009 - 18:41:36) > > CPU: AMCC PowerPC 460EX Rev. A at 800 MHz (PLB=200, OPB=100, EBC=100 MHz) > Security/Kasumi support > Bootstrap Option H - Boot ROM Location I2C (Addr 0x52) > Internal PCI arbiter disabled > 32 kB I-Cache 32 kB D-Cache > Board: Canyonlands - AMCC PPC460EX Evaluation Board, 1*PCIe/1*SATA, Rev. 14 > I2C: ready > DTT: 1 is 39 C > DRAM: 512 MB (ECC not enabled, 400 MHz, CL3) > FLASH: 64 MB > NAND: 128 MiB > PCI: Bus Dev VenId DevId Class Int > 00 06 1002 5960 0300 ff > 00 06 1002 5940 0380 ff > PCIE1: link is not up. > PCIE1: initialization as root-complex failed > Video: ATI Radeon video card (1002, 5960) found @(0:6:0) > rinfo->mmio_base = 0x88000000 > rinfo->fb_local_base = 0x59c00000 > videoboot: Booting PCI video card bus 0, function 0, device 6 > Machine Check Exception.
Now register access to BAR2 seems to work. What was the value of VIDEO_IO_OFFSET used with this latest test? Best regards, Anatolij -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [email protected] _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
