Hi Anatolij ! > Kazuaki, could you please change VIDEO_IO_OFFSET to 0xD0800000 and > test again?
I'll try it. Regards, Kazuaki Ichinohe. Anatolij Gustschin さんは書きました: > Hi Stefan, Kazuaki, > > Stefan Roese wrote: >> On Wednesday 18 March 2009, Kazuaki Ichinohe wrote: >>> U-boot version: u-boot-2009.01 >>> boot log is the following. >>> >>> U-Boot 2009.01 ( 3譛 18 2009 - 09:38:17) >>> >>> ・PU: AMCC PowerPC 460EX Rev. A at 600 MHz (PLB=200, OPB=100, EBC=100 MHz) >>> Security/Kasumi support >>> Bootstrap Option H - Boot ROM Location I2C (Addr 0x52) >>> Internal PCI arbiter disabled >>> 32 kB I-Cache 32 kB D-Cache >>> Board: Canyonlands - AMCC PPC460EX Evaluation Board, 1*PCIe/1*SATA, Rev. 14 >>> I2C: ready >>> DTT: 1 is 38 C >>> DRAM: 512 MB (ECC not enabled, 400 MHz, CL3) >>> FLASH: 64 MB >>> NAND: 128 MiB >>> PCI: Bus Dev VenId DevId Class Int >>> 00 06 1002 5960 0300 ff >>> 00 06 1002 5940 0380 ff >>> PCIE1: link is not up. >>> PCIE1: initialization as root-complex failed >>> Video: ATI Radeon video card (1002, 5960) found @(0:6:0) >>> Machine Check Exception. >>> Caused by (from msr): regs 1fe3ac30 Data Read PLB Error >>> NIP: 1FF82B10 XER: 00000000 LR: 1FF82AE8 REGS: 1fe3ac30 TRAP: 0200 DEAR: >>> 70600027 >>> MSR: 00021000 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00 >> Anatolij, do you have any ideas what's going wrong here? > > one issue is incorrect VIDEO_IO_OFFSET in the board config file, it > should be 0xD0800000 instead of 0xD8000000, i think. > > Kazuaki, could you please change VIDEO_IO_OFFSET to 0xD0800000 and > test again? > > Best regards, > Anatolij > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
