Stefan Roese wrote: > On Wednesday 18 March 2009, Felix Radensky wrote: > >>>> PCI: Bus Dev VenId DevId Class Int >>>> 00 06 1002 5960 0300 ff >>>> 00 06 1002 5940 0380 ff >>>> PCIE1: link is not up. >>>> PCIE1: initialization as root-complex failed >>>> Video: ATI Radeon video card (1002, 5960) found @(0:6:0) >>>> Machine Check Exception. >>>> Caused by (from msr): regs 1fe3ac30 Data Read PLB Error >>>> NIP: 1FF82B10 XER: 00000000 LR: 1FF82AE8 REGS: 1fe3ac30 TRAP: 0200 DEAR: >>>> 70600027 >>>> MSR: 00021000 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00 >>>> >>> Anatolij, do you have any ideas what's going wrong here? >>> >>> Thanks. >>> >> Looks like you have ATI cards in both PCI-E slots and also SATA >> enabled. This cannot work, as SATA shares lines with x1 PCI-E >> slot on Canyonlands. Use J6 jumper to enable both PCI-E slots. >> > > No, it's PCI and not PCIe. > > Best regards, > Stefan > >
I see. Sorry for the noise. I was confused by the presence of two devices, and the fact that there's only one PCI slot on this board. It should be a multifunction PCI device then. Felix. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
