> Now register access to BAR2 seems to work. What was the value > of VIDEO_IO_OFFSET used with this latest test?
VIDEO_IO_OFFSET is 0xD0800000 Regards, Kazuaki Ichinohe Anatolij Gustschin wrote: > Kazuaki Ichinohe wrote: >> Hi Anatolij, Stefan, >> >> Thank you for the reply. >> I confirmed your patch source. >> However, the exception was generated. >> >> ------------------------------------------------ >> U-Boot 2009.01 ( 3月 19 2009 - 18:41:36) >> >> CPU: AMCC PowerPC 460EX Rev. A at 800 MHz (PLB=200, OPB=100, EBC=100 MHz) >> Security/Kasumi support >> Bootstrap Option H - Boot ROM Location I2C (Addr 0x52) >> Internal PCI arbiter disabled >> 32 kB I-Cache 32 kB D-Cache >> Board: Canyonlands - AMCC PPC460EX Evaluation Board, 1*PCIe/1*SATA, Rev. 14 >> I2C: ready >> DTT: 1 is 39 C >> DRAM: 512 MB (ECC not enabled, 400 MHz, CL3) >> FLASH: 64 MB >> NAND: 128 MiB >> PCI: Bus Dev VenId DevId Class Int >> 00 06 1002 5960 0300 ff >> 00 06 1002 5940 0380 ff >> PCIE1: link is not up. >> PCIE1: initialization as root-complex failed >> Video: ATI Radeon video card (1002, 5960) found @(0:6:0) >> rinfo->mmio_base = 0x88000000 >> rinfo->fb_local_base = 0x59c00000 >> videoboot: Booting PCI video card bus 0, function 0, device 6 >> Machine Check Exception. > > Now register access to BAR2 seems to work. What was the value > of VIDEO_IO_OFFSET used with this latest test? > > Best regards, > Anatolij > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
