On Fri, Feb 22, 2013 at 6:13 PM, Benoît Thébaudeau <benoit.thebaud...@advansee.com> wrote:
> CONFIG_SYS_TEXT_BASE seems fine according to this trace. But anyway, can you > test with this change in mx31pdk.h? > #define CONFIG_SPL_TEXT_BASE 0x84000000 > #define CONFIG_SYS_TEXT_BASE 0x83000000 > > Can you try to revert 10/19, only for arm1136/start.S (1 line to restore)? > There > is an issue in this patch that I have already fixed in my v8. Just tried with the above changes: U-Boot code: 83000000 -> 8302C184 BSS: -> 830311B4 CPU: Freescale i.MX31 rev 2.0 at 532 MHz. Reset cause: POR Board: MX31PDK monitor len: 000311B4 ramsize: 08000000 TLB table from 87ff0000 to 87ff4000 Top of RAM usable for U-Boot at: 87ff0000 Reserving 196k for U-Boot at: 87fbe000 Reserving 640k for malloc() at: 87f1e000 Reserving 32 Bytes for Board Info at: 87f1dfe0 Reserving 128 Bytes for Global Data at: 87f1df60 New Stack Pointer is: 87f1df50 RAM Configuration: Bank #0: 80000000 128 MiB relocation Offset is: 04fbe000 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
