Hi Fabio,
On Friday, February 22, 2013 8:30:36 PM, Fabio Estevam wrote:
> On Fri, Feb 22, 2013 at 4:14 PM, Fabio Estevam <feste...@gmail.com> wrote:
>
> > Just tested your patch series on a mx31pdk, but unfortunately it does
> > not fix mx31pdk boot.
> >
> > I will start looking at it, but any suggestion is welcome.
>
> Ok, just changed to a proper toolchain and the result is a bit better now:
>
> U-Boot 2013.01 (Feb 22 2013 - 16:25:48)
>
> CPU: Freescale i.MX31 rev 2.0 at 532 MHz.
> Reset cause: POR
> Board: MX31PDK
> DRAM: 128 MiB
>
> (hangs here).
It looks very much like the issue that Marek had on i.MX53 (which self-resolved
for an unknown reason).
Try to enable the debug trace to see if anything else is printed after
display_dram_config(). I would especially be interested in:
debug("relocation Offset is: %08lx\n", gd->reloc_off);
debug("monitor flash len: %08lX\n", monitor_flash_len);
We should also check if CONFIG_SPL_TEXT_BASE and CONFIG_SYS_TEXT_BASE don't
overlap with something depending on code size. That's especially true for
CONFIG_SYS_TEXT_BASE.
After that, JTAG if no clue left... ;(
Best regards,
Benoît
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
