Hi Benoît,
On Fri, Feb 22, 2013 at 5:09 PM, Benoît Thébaudeau
<benoit.thebaud...@advansee.com> wrote:
> It looks very much like the issue that Marek had on i.MX53 (which
> self-resolved
> for an unknown reason).
>
> Try to enable the debug trace to see if anything else is printed after
> display_dram_config(). I would especially be interested in:
> debug("relocation Offset is: %08lx\n", gd->reloc_off);
> debug("monitor flash len: %08lX\n", monitor_flash_len);
Here is the output:
U-Boot 2013.01 (Feb 22 2013 - 18:00:50)
U-Boot code: 87F00000 -> 87F2C184 BSS: -> 87F311B4
CPU: Freescale i.MX31 rev 2.0 at 532 MHz.
Reset cause: POR
Board: MX31PDK
monitor len: 000311B4
ramsize: 08000000
TLB table from 87ff0000 to 87ff4000
Top of RAM usable for U-Boot at: 87ff0000
Reserving 196k for U-Boot at: 87fbe000
Reserving 640k for malloc() at: 87f1e000
Reserving 32 Bytes for Board Info at: 87f1dfe0
Reserving 128 Bytes for Global Data at: 87f1df60
New Stack Pointer is: 87f1df50
RAM Configuration:
Bank #0: 80000000 128 MiB
relocation Offset is: 000be000
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
