On Fri, Feb 22, 2013 at 7:03 PM, Fabio Estevam <feste...@gmail.com> wrote: > On Fri, Feb 22, 2013 at 7:02 PM, Fabio Estevam <feste...@gmail.com> wrote: > >> U-Boot code: 87F00000 -> 87F2C184 BSS: -> 87F311B4 >> CPU: Freescale i.MX31 rev 2.0 at 532 MHz. >> Reset cause: WDOG >> Board: MX31PDK >> monitor len: 000311B4 >> ramsize: 08000000 >> TLB table from 87ff0000 to 87ff4000 >> Top of RAM usable for U-Boot at: 87ff0000 >> Reserving 196k for U-Boot at: 87fbe000 >> Reserving 640k for malloc() at: 87f1e000 >> Reserving 32 Bytes for Board Info at: 87f1dfe0 >> Reserving 128 Bytes for Global Data at: 87f1df60 >> New Stack Pointer is: 87f1df50 >> RAM Configuration: >> Bank #0: 80000000 128 MiB >> relocation Offset is: 000be000 >> monitor flash len: 00030F7C >> Now running in RAM - U-Boot at: 87fbe000 >> NAND: 256 MiB > > and after this it does not hang, it keeps resetting forever.
I disabled watchdog and now I can reach U-boot prompt :-) Thanks Benoit and Troy! Will fix the watchdog later. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
