> water_source=groundwater +1
> water_level=6 (in meters) ? > I mean the distance between the ground level and the > water level. E.g. the water is 3 m below ground. Suction head is the right word in hydraulics. > I think the water level will drop as large amounts of water are drawn off, so > you may need the distance from ground level to the bottom of the water source. For these cases and for ponds or rivers where the water level may vary, we can use: min_scution_head=# (meters) when water level is high and the distance from ground level is to the minimum max_suction_head=# (meters) ) when water level is low and the distance from ground level is to the maximum > pump_type=bilge_pump|electric_pump|none ? Maybe integrated_pump=yes|bilge_pump|electric_pump|none ? > water_source=water_tank +1 > water_volume=small|medium|large|# (small 75–150 m^3, medium) 150–300 m^3 and > large>300 m^3 or numeric value). -1 > water_volume=# (numeric value in m^3). +1 > You are right, m^3 is shorter. But I don't mind if it's 75000 l or 75m^3. > Small, medium, large don't have to be, because it is not as well defined as a > absolute value. > I think it depends on the country, so the applications using this information > can convert from l to m^3 or small|medium|large +1 > # fire_hydrant:class=* > Should be clarified what AA, A, B, C means. It is already explained in the proposal chapter "American Water Works Association colour scheme" > 'Static Water Supply' you mean a place near a pond/lake/stream where > no prebuilt pipe is available and it is just a place where to park the > fire engine to get easy access to the water by using there own hoses? > > As far as I understood that will be the emergency=suction_point > That is too restrictive - limited to natural=water and rivers, I'd think > streams would be accepted too. > 'Static Water Supply' around me are mostly private backyard swimming pools > (leisure=swimming_pool access=private). > Where the owner agrees a 'SWS' sign is placed at the property boundary close > to the road. No, it isn't restrictive. For swimming pools you can place a node where you can park the fire engine (or where there is the SWS sign) with tags emergecy=suction_point + water_source=swimming_pool + water_volume + ... Cheers Alberto --- Questa e-mail è stata controllata per individuare virus con Avast antivirus. https://www.avast.com/antivirus _______________________________________________ Tagging mailing list Tagging@openstreetmap.org https://lists.openstreetmap.org/listinfo/tagging
