> -Original Message-
> From: U-Boot On Behalf Of Jagan Teki
> Sent: Friday, April 3, 2020 8:09 PM
> To: Kuldeep Singh
> Cc: U-Boot-Denx
> Subject: [EXT] Re: [PATCH] spi: nxp-fspi: Add 1us delay to make controller
> ready for next transaction
>
> Caution: EXT Email
>
> On Mon, Feb 24,
> -Original Message-
> From: Stefan Roese
> Sent: Tuesday, October 22, 2019 9:12 PM
> To: Schrempf Frieder ; Ashish Kumar
> ; Ye Li ;
> ja...@amarulasolutions.com
> Cc: Fabio Estevam ; u-boot@lists.denx.de; dl-
> uboot-imx
> Subject: Re: [U-Boot] [EXT] Re
Use mtdparts to create partitions dynamically rather
than using static partitions in device tree
Signed-off-by: Ashish Kumar
---
include/configs/BSC9131RDB.h | 15 +++
1 files changed, 15 insertions(+), 0 deletions(-)
diff --git a/include/configs/BSC9131RDB.h b/include
Use mtdparts to create partitions dynamically rather
than using static partitions in device tree
Signed-off-by: Ashish Kumar
---
include/configs/BSC9132QDS.h | 16
1 files changed, 16 insertions(+), 0 deletions(-)
diff --git a/include/configs/BSC9132QDS.h b/include
* Use mtdparts to create partitions dynamically rather
than using static partitions in device tree
Signed-off-by: Ashish Kumar
---
include/configs/BSC9131RDB.h | 15 +++
1 files changed, 15 insertions(+), 0 deletions(-)
V2: - Reduce uboot and dtb size in NAND
- Remove
* Use mtdparts to create partitions dynamically rather
than using static partitions in device tree
Signed-off-by: Ashish Kumar
---
include/configs/BSC9131RDB.h | 15 +++
1 files changed, 15 insertions(+), 0 deletions(-)
V2: - Reduce uboot and dtb size in NAND
- Remove
* Use mtdparts to create partitions dynamically rather
than using static partitions in device tree
Signed-off-by: Ashish Kumar
---
include/configs/BSC9132QDS.h | 16
1 files changed, 16 insertions(+), 0 deletions(-)
V2: - Reduce uboot and dtb size in NAND
- Remove
* Use mtdparts to create partitions dynamically rather
than using static partitions in device tree
Signed-off-by: Ashish Kumar
---
include/configs/BSC9132QDS.h | 16
1 files changed, 16 insertions(+), 0 deletions(-)
diff --git a/include/configs/BSC9132QDS.h b/include
Sorry
Please ignore this patch, since version info is incorrect
Regards
Ashish
-Original Message-
From: Ashish Kumar [mailto:ashish.ku...@freescale.com]
Sent: Monday, September 22, 2014 8:06 PM
To: u-boot@lists.denx.de
Cc: Wood Scott-B07421; Sun York-R58495; Kumar Ashish-B37399
Subject
Sorry, please ignore this patch.
Since version info is missing.
Regards
Ashish
-Original Message-
From: Ashish Kumar [mailto:ashish.ku...@freescale.com]
Sent: Monday, September 22, 2014 8:06 PM
To: u-boot@lists.denx.de
Cc: Wood Scott-B07421; Sun York-R58495; Kumar Ashish-B37399
Subject
* fdt_fixup_mtdparts is called from ft_board_setup
* run "mtdparts default" to create NAND, NOR partition on uboot
* Use mtdparts to create partitions dynamically rather
than using static partitions in device tree
Signed-off-by: Ashish Kumar
---
board/freescale/bsc9132qds/bs
* fdt_fixup_mtdparts is called from ft_board_setup
* Run "mtdparts default" to create NAND partition on uboot
* Use mtdparts to create partitions dynamically rather
than using static partitions in device tree
Signed-off-by: Ashish Kumar
---
board/freescale/bsc9131rdb/bsc9131rd
Cc: Wood Scott-B07421
Subject: Re: [PATCH] powerpc/BSC9132QDS: Enable creation of dynamic partition
for NAND and NOR
On 10/06/2014 05:54 AM, Ashish Kumar wrote:
> * fdt_fixup_mtdparts is called from ft_board_setup
> * run "mtdparts default" to create NAND, NOR partition o
> -Original Message-
> From: Schrempf Frieder
> Sent: Monday, December 3, 2018 4:49 PM
> To: Ashish Kumar ; u-boot@lists.denx.de;
> ja...@openedev.com
> Cc: Rajat Srivastava
> Subject: Re: [U-Boot] [PATCH] driver/spi: fsl_qspi: Remove non-DM stuff
>
> Hi,
>
Hello Jagan,
> -Original Message-
> From: Jagan Teki [mailto:jagannadh.t...@gmail.com]
> Sent: Monday, May 14, 2018 3:18 PM
> To: Ashish Kumar
> Cc: Jagan Teki ; York Sun
> ; Prabhakar Kushwaha
> ; Yogesh Narayan Gaur
> ; Poonam Aggrwal
> ; u-boot@lists.denx
Convert fsl_qspi.c to complete DM mode.
Signed-off-by: Ashish Kumar
Tested-by: Rajat Srivastava
Tested-by: Ye Li
---
Tested on LS1088ARDB(arm64).
Tested on LS1021ATWR(arm32) by Rajat
Tested on i.mx6 and i.mx7 by Ye Li
Depends on patch series:
http://patchwork.ozlabs.org/patch/935858/
http
Change sector size to 256KiB in table spi_flash_ids.
Signed-off-by: Ashish Kumar
---
drivers/mtd/spi/spi_flash_ids.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/spi/spi_flash_ids.c b/drivers/mtd/spi/spi_flash_ids.c
index c45d2e8..54d491c 100644
--- a/drivers
4K erase size is used only in case of hydrid mode which is not
supported on any NXP platform with flash "s25fs512s".
Supported mode is uniform sector, with erase size 256kiB.
Signed-off-by: Ashish Kumar
---
configs/ls1046aqds_qspi_defconfig| 1
> -Original Message-
> From: York Sun
> Sent: Monday, June 25, 2018 9:05 PM
> To: Ashish Kumar ; u-boot@lists.denx.de
> Cc: Udit Agarwal ; Priyanka Jain
> ; Vinitha V Pillai ; Prabhakar
> Kushwaha ; Mingkai Hu
> ; york@nxp.com.com; Ruchika Gupta
>
>
4K erase size is used only in case of hydrid mode which is not
supported on any NXP platform with flash "s25fs512s".
Supported mode is uniform sector, with erase size 256kiB.
Signed-off-by: Ashish Kumar
---
v2:
1. use make savedefconfig
2. Include LS1012 qspi defconfigs as well
3.
Move CONFIG_SPI_FLASH_SPANSION, CONFIG_SPI_FLASH, to defconfig.
Also disable disable 4K erase size option.
Signed-off-by: Ashish Kumar
---
configs/ls2088ardb_qspi_SECURE_BOOT_defconfig | 3 +++
configs/ls2088ardb_qspi_defconfig | 3 +++
include/configs/ls2080ardb.h
9 PM
> To: sba...@denx.de; Peng Fan ; Ashish Kumar
> ; Fabio Estevam
> Cc: u-boot@lists.denx.de
> Subject: [PATCH] imx: imx7d-sdb: Add DM QSPI support
>
> On iMX7D SabreSD board, the QSPI has pins conflict with EPDC (default).
> To use QSPI, users have to rework the board (de-po
> -Original Message-
> From: U-Boot On Behalf Of Priyanka Jain
> Sent: Thursday, January 24, 2019 10:52 AM
> To: u-boot@lists.denx.de; York Sun
> Cc: Priyanka Jain
> Subject: [U-Boot] [PATCH][v3] board/lx2160ardb: Add distro boot support
>
> Add u-boot enviroments to support distro bo
> -Original Message-
> From: Meenakshi Aggarwal
> Sent: Tuesday, February 12, 2019 2:44 PM
> To: u-boot@lists.denx.de; Prabhakar Kushwaha
>
> Cc: Meenakshi Aggarwal
> Subject: [PATCH] mc : Add support to run MC in 128 MB DDR size
Ashish: Rephrase to "Reduce MC memory size to 128M" from
> -Original Message-
> From: U-Boot On Behalf Of Vignesh R
> Sent: Tuesday, December 18, 2018 10:49 PM
> To: Jagan Teki
> Cc: Marek Vasut ; Tom Rini ; U-Boot-
> Denx ; Michal Simek ; Siva
> Durga Prasad Paladugu ; Boris Brezillon
> ; Miquel Raynal ;
> Stefan Roese ; Jagan Teki
> Subjec
> -Original Message-
> From: Jagan Teki
> Sent: Wednesday, October 10, 2018 11:51 AM
> To: Ashish Kumar
> Cc: U-Boot-Denx ; Jagan Teki ;
> Rajat Srivastava ; Suresh Gupta
>
> Subject: Re: [U-Boot] [PATCH] driver/mtd: Add MICRON manufacturer id in spi
> fr
Signed-off-by: Rajat Srivastava
Signed-off-by: Ashish Kumar
---
configs/ls1088aqds_qspi_SECURE_BOOT_defconfig| 1 +
configs/ls1088aqds_qspi_defconfig| 1 +
configs/ls1088aqds_sdcard_qspi_defconfig | 1 +
configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
Enable AHB support for Flexspi controller interface meaning
memory can be accessed via md command using absolute addresses
Signed-off-by: Yogesh Gaur
Signed-off-by: Rajat Srivastava
Signed-off-by: Ashish Kumar
---
v3:
Depends upon http://patchwork.ozlabs.org/patch/975009/
v2:
1. Rename FSPI
> -Original Message-
> From: York Sun
> Sent: Tuesday, November 13, 2018 3:34 AM
> To: Ashish Kumar
> Cc: u-boot@lists.denx.de; Rajat Srivastava ; Yogesh
> Narayan Gaur
> Subject: Re: [PATCH v2] fsl-lsch3: soc: Enable AHB read support for Flexspi
> controller
> -Original Message-
> From: York Sun
> Sent: Tuesday, November 20, 2018 2:13 AM
> To: Ashish Kumar ; u-boot@lists.denx.de
> Cc: Yogesh Narayan Gaur ; Rajat Srivastava
>
> Subject: Re: [PATCH v3] fsl-lsch3: soc: Enable AHB read support for Flexspi
> controller
&
Signed-off-by: Suresh Gupta
Signed-off-by: Yogesh Gaur
Signed-off-by: Ashish Kumar
---
drivers/mtd/spi/sf_internal.h | 1 +
drivers/mtd/spi/spi_flash.c | 2 ++
2 files changed, 3 insertions(+)
diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
index 4f63cacc64
-by: Yogesh Gaur
Signed-off-by: Rajat Srivastava
Signed-off-by: Ashish Kumar
---
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 10 +
drivers/spi/Kconfig |7 +
drivers/spi/Makefile |1 +
drivers/spi/nxp_fspi.c| 1088
Signed-off-by: Priyanka Jain
Signed-off-by: Sriram Dash
Signed-off-by: Ashish Kumar
---
depends upon:
http://patchwork.ozlabs.org/patch/962357/
arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h | 4
1 file changed, 4 insertions(+)
diff --git a/arch/arm/include/asm/arch-fsl
Enable AHB support for flexspi controller interface meaning
memory can be accessed via md command using absolute addresses
Signed-off-by: Yogesh Gaur
Signed-off-by: Rajat Srivastava
Signed-off-by: Ashish Kumar
---
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 10 ++
arch/arm/cpu/armv8/fsl
Hello York,
> -Original Message-
> From: York Sun
> Sent: Tuesday, September 25, 2018 10:20 PM
> To: Ashish Kumar ; u-boot@lists.denx.de
> Cc: Rajat Srivastava ; Yogesh Narayan Gaur
>
> Subject: Re: [PATCH] fsl-lsch3: soc: Enable AHB support flexspi controller
>
Signed-off-by: Priyanka Jain
Signed-off-by: Sriram Dash
Signed-off-by: Ashish Kumar
---
v2:
1. Rename SYS_FSL_FSPI_ADDR SYS_NXP_FSPI_ADDR
2. Add mcaro for lutkey base addr and LUTa base addr
arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h | 6 ++
1 file changed, 6 insertions
Enable AHB support for Flexspi controller interface meaning
memory can be accessed via md command using absolute addresses
Signed-off-by: Yogesh Gaur
Signed-off-by: Rajat Srivastava
Signed-off-by: Ashish Kumar
---
v2:
1. Rename FSPI to FlexSPI in description and comments
2. s/cmd/command
3
Hello York,
It is like a heads-up, that user needs to erase the environment variable
location before flashing a new uboot for the changes to reflect.
Regards
Ashish
-Original Message-
From: york sun [mailto:york@nxp.com]
Sent: Monday, February 01, 2016 10:17 PM
To: Ashish Kumar
Agree, Please drop this while merging.
Regards
Ashish
-Original Message-
From: york sun
Sent: Tuesday, February 02, 2016 11:50 AM
To: Ashish Kumar ; u-boot@lists.denx.de
Subject: Re: [PATCH] ls2-2085a: Increase default hugepage count
On 02/01/2016 10:09 PM, Ashish Kumar wrote:
> He
Hello Joe,
Could you please ack if there are no further queries.
Regards
Ashish
-Original Message-
From: U-Boot [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Ashish Kumar
Sent: Tuesday, February 21, 2017 1:17 PM
To: Joe Hershberger
Cc: u-boot
Subject: Re: [U-Boot] [PATCH v2
From: Prabhakar Kushwaha
SerDes information is not necessary to be present in RCWSR29 register.
It may vary from SoC to SoC.
So Avoid RCWSR28 register hard-coding.
Signed-off-by: Prabhakar Kushwaha
---
.../cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c| 28 +++
.../include/
From: Prabhakar Kushwaha
MAC number used per QSGMII is not fixed. It may wary from SoC to SoC.
So move QSGMII wriop_init_dpmac() to SoC file.
Signed-off-by: Prabhakar Kushwaha
---
.../cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c| 27 +
.../include/asm/arch-fsl-layerscape/
immap_lsch2 to fsl_immap,
so that it can be used for both chasis 2 and chasis 3.
Signed-off-by: Prabhakar Kushwaha
Signed-off-by: Ashish Kumar
---
README | 9
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 6 +++
arch/arm/cpu/armv8/fsl-layerscape
This i2c errata is only valid for ls2080 and ls2088 SoC
Signed-off-by: Ashish Kumar
---
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 4
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 4
2 files changed, 8 insertions(+)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
b/arch/arm
Number of TZASC instances may vary across NXP SoCs.
So put TZASC configuration under instance specific defines.
Signed-off-by: Prabhakar Kushwaha
Signed-off-by: Ashish Kumar
---
arch/arm/cpu/armv8/fsl-layerscape/Kconfig| 8
arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 24
From: Prabhakar Kushwaha
MAC number used per QSGMII is not fixed. It may wary from SoC to SoC.
So move QSGMII wriop_init_dpmac() to SoC file.
Signed-off-by: Prabhakar Kushwaha
Signed-off-by: Ashish Kumar
---
v2:
Incorporate York's Review comments
.../cpu/armv8/fsl-layer
From: Prabhakar Kushwaha
SerDes information is not necessary to be present in RCWSR29 register.
It may vary from SoC to SoC.
So Avoid RCWSR28 register hard-coding.
Signed-off-by: Prabhakar Kushwaha
Signed-off-by: Ashish Kumar
---
v2:
Incorporate York's Review comments
.../cpu/armv
From: Prabhakar Kushwaha
Even after memory free of phydev, priv is still pointing to the
obsolete address.
So update priv->phydev as NULL after memory free.
Signed-off-by: Prabhakar Kushwaha
Signed-off-by: Ashish Kumar
---
v2:
Add signoff
drivers/net/ldpaa_eth/ldpaa_eth.c | 4 +++-
1 f
This patch add support of LS1088AQDS platform.
The LS1088A QorIQTM Development System (QDS) is a
high-performance computing, evaluation, and
development platform that supports the LS1088A QorIQ Architecture
processor.
Signed-off-by: Prabhakar Kushwaha
Signed-off-by: Ashish Kumar
Signed-off-by
ECC
- Data path acceleration architecture 2.0 (DPAA2)
- Ethernet interfaces: SGMIIs, RGMIIs, QSGMIIs, XFIs
- QSPI, IFC, 3 PCIe, 1 SATA, 2 USB, 1 SDXC, 2 DUARTs etc
Signed-off-by: Alison Wang
Signed-off-by: Prabhakar Kushwaha
Signed-off-by: Ashish Kumar
---
arch/arm/cpu/armv8/fsl
From: Prabhakar Kushwaha
Even after memory free of phydev, priv is still pointing to the
obsolete address.
So update priv->phydev as NULL after memory free.
Signed-off-by: Prabhakar Kushwaha
---
drivers/net/ldpaa_eth/ldpaa_eth.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --
LS1088A is an ARMv8 implementation. The LS1088ARDB is an evaluatoin
platform that supports the LS1088A family SoCs. This patch add basic
support of the platform.
Signed-off-by: Alison Wang
Signed-off-by: Prabhakar Kushwaha
Signed-off-by: Ashish Kumar
Signed-off-by: Raghav Dogra
Signed-off-by
Hello Joe,
Please see inline.
Regards
Ashish
-Original Message-
From: Joe Hershberger [mailto:joe.hershber...@gmail.com]
Sent: Thursday, February 16, 2017 5:22 AM
To: Ashish Kumar
Cc: u-boot
Subject: Re: [U-Boot] [PATCH v2] driver: net: ldpaa: Update priv->phydev after
free()
This i2c errata is only valid for LS2080A and its variants,
namely LS2080A, LS2085A and LS2088A
Signed-off-by: Ashish Kumar
---
v2:
Change Descristion to make it more specific about impacted SoC
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 4
arch/arm/cpu/armv8/fsl-layerscape/soc.c
immap_lsch2 to fsl_immap,
so that it can be used for both chasis 2 and chasis 3.
Signed-off-by: Prabhakar Kushwaha
Signed-off-by: Ashish Kumar
---
v2:
Add new Kconfig in alphabetic order
README | 9
arch/arm/cpu/armv8/fsl-layerscape/Kconfig
Number of TZASC instances may vary across NXP SoCs.
So put TZASC configuration under instance specific defines.
Signed-off-by: Prabhakar Kushwaha
Signed-off-by: Ashish Kumar
---
v2:
Change description to make it more appropriate
arch/arm/cpu/armv8/fsl-layerscape/Kconfig| 8
CI-400 bus
from immap_lsch2 to fsl_immap, so that it can be used
for both chasis 2 and chasis 3.
"CONFIG_SYS_CCI400_ADDR" is depricated and new SYS_CCI400_OFFSET
is introduced in Kconfig
Signed-off-by: Ashish Kumar
Signed-off-by: Prabhakar Kushwaha
---
v3:
This is v3 for https://patchw
0 bus from
immap_ls102xa to fsl_immap, since same is defined there already
"CONFIG_SYS_CCI400_ADDR" is depricated and new SYS_CCI400_OFFSET
is introduced in Kconfig
Signed-off-by: Ashish Kumar
---
v3:
This is v3 for https://patchwork.ozlabs.org/patch/731464/
arch/arm/cpu/a
This config is depricated and new config SYS_CCI400_OFFSET
is introduced in Kconfig
Signed-off-by: Ashish Kumar
---
v3:
This is v3 for https://patchwork.ozlabs.org/patch/731464/
scripts/config_whitelist.txt | 1 -
1 file changed, 1 deletion(-)
diff --git a/scripts/config_whitelist.txt b
Hello York,
Please see response inline
Regards
Ashish
-Original Message-
From: York Sun [mailto:york@nxp.com]
Sent: Wednesday, April 12, 2017 2:04 AM
To: Ashish Kumar ; u-boot@lists.denx.de;
u-b...@linux.freescale.net
Cc: Alison Wang ; Prabhakar Kushwaha
; Raghav Dogra ; Shaohui
CI-400 bus
from immap_lsch2 to fsl_immap, so that it can be used
for both chasis 2 and chasis 3.
"CONFIG_SYS_CCI400_ADDR" is depricated and new SYS_CCI400_OFFSET
is introduced in Kconfig
Signed-off-by: Ashish Kumar
Signed-off-by: Prabhakar Kushwaha
---
v3:
This is v3 for https://patchw
0 bus from
immap_ls102xa to fsl_immap, since same is defined there already
"CONFIG_SYS_CCI400_ADDR" is depricated and new SYS_CCI400_OFFSET
is introduced in Kconfig
Signed-off-by: Ashish Kumar
---
v3:
This is v3 for https://patchwork.ozlabs.org/patch/731464/
v4:
No change
arch/arm/cpu/a
This config is depricated and new config SYS_CCI400_OFFSET
is introduced in Kconfig
Signed-off-by: Ashish Kumar
---
v3:
This is v3 for https://patchwork.ozlabs.org/patch/731464/
v4:
No change
scripts/config_whitelist.txt | 1 -
1 file changed, 1 deletion(-)
diff --git a/scripts
Hello York, Prabhakar,
I am seeing build failure on powerpc u-boot with SPL.
I have checked B4860QDS_NAND_defconfig and T1040RDB_SDCARD_defconfig
common/built-in.o:(.got2+0x2a4): undefined reference to `do_bootd'
scripts/Makefile.spl:333: recipe for target 'spl/u-boot-spl' failed
make[1]: *** [sp
: Tuesday, July 25, 2017 4:33 PM
To: Ashish Kumar ; York Sun ;
u-boot@lists.denx.de
Subject: RE: compilation failure on Powerpc with SPL
Hi York,
Can you please share details of code-base.
Regards,
Prabhakar
From: Ashish Kumar
Sent: Tuesday, July 25, 2017 4:13 PM
To: York Sun mailto:york
Hello York,
Thanks for the help. Issue is not observed with toolchain gcc-4.9,
Could you please help understand why this is compiler dependent?
Regards
Ashish
-Original Message-
From: York Sun
Sent: Wednesday, July 26, 2017 12:04 AM
To: Ashish Kumar ; Prabhakar Kushwaha
; u-boot
Concatenation of u-boot-spl.bin and u-boot.img for NXP layerscape
platform SoC: LS1088A/LS2080A and their variants
This patch also depricates UBOOT_BINLOAD in favour of SPL_PAYLOAD
Signed-off-by: Ashish Kumar
---
v2:
This is v2 version of https://patchwork.ozlabs.org/patch/755904/
Also
Hello Tom,
Thanks for the comments, please see inline for respone.
Regards
Ashish
-Original Message-
From: Tom Rini [mailto:tr...@konsulko.com]
Sent: Thursday, July 27, 2017 3:36 AM
To: Ashish Kumar
Cc: u-boot@lists.denx.de
Subject: Re: [U-Boot] [Patch v2] Makefile: Concatenation of u
Concatenation of u-boot-spl.bin and u-boot.img for NXP layerscape
platform SoC: LS1088A/LS2080A and their variants
This patch also depricates UBOOT_BINLOAD in favour of SPL_PAYLOAD
Signed-off-by: Ashish Kumar
---
v2:
This is v2 version of https://patchwork.ozlabs.org/patch/755904/
Also
Hello Joe,
Sorry for late response, please see inline.
Regards
Ashish
-Original Message-
From: Joe Hershberger [mailto:joe.hershber...@gmail.com]
Sent: Tuesday, March 07, 2017 3:39 AM
To: Ashish Kumar
Cc: u-boot ; Prabhakar Kushwaha
Subject: Re: [U-Boot] [PATCH v2] driver: net
Number of TZASC instances may vary across NXP SoCs.
So put TZASC configuration under instance specific defines.
Signed-off-by: Prabhakar Kushwaha
Signed-off-by: Ashish Kumar
---
v3:
Fix indentation in commit message
arch/arm/cpu/armv8/fsl-layerscape/Kconfig| 8
arch/arm/cpu
(DPAA2)
- Ethernet interfaces: SGMIIs, RGMIIs, QSGMIIs, XFIs
- QSPI, IFC, 3 PCIe, 1 SATA, 2 USB, 1 SDXC, 2 DUARTs etc
Signed-off-by: Alison Wang
Signed-off-by: Prabhakar Kushwaha
Signed-off-by: Ashish Kumar
Signed-off-by: Raghav Dogra
Signed-off-by: Shaohui Xie
Signed-off-by: Ashish Kumar
LS1088A is an ARMv8 implementation. The LS1088ARDB is an evaluatoin
platform that supports the LS1088A family SoCs. This patch add basic
support of the platform.
Signed-off-by: Alison Wang
Signed-off-by: Prabhakar Kushwaha
Signed-off-by: Ashish Kumar
Signed-off-by: Raghav Dogra
Signed-off-by
This patch add support of LS1088AQDS platform.
The LS1088A QorIQTM Development System (QDS) is a
high-performance computing, evaluation, and
development platform that supports the LS1088A QorIQ Architecture
processor.
Signed-off-by: Prabhakar Kushwaha
Signed-off-by: Ashish Kumar
Signed-off-by
Concatenation of u-boot-spl.bin and u-boot.img for NXP layerscape
platform SoC: LS1088A/LS2080A and their variants
New Kconfig option added SPL_USE_HEADER for the same
Signed-off-by: Ashish Kumar
---
Makefile | 14 +-
arch/arm/cpu/armv8/fsl
Add SD boot support for LS1088ARDB
Signed-off-by: Prabhakar Kushwaha
Signed-off-by: Raghav Dogra
Signed-off-by: Ashish Kumar
---
arch/arm/Kconfig | 3 +++
configs/ls1088ardb_sdcard_qspi_defconfig | 31 ++
include/configs/ls1088a_common.h
Add SD boot support for LS1088QDS
Signed-off-by: Prabhakar Kushwaha
Signed-off-by: Raghav Dogra
Signed-off-by: Ashish Kumar
---
arch/arm/Kconfig | 3 +++
configs/ls1088aqds_sdcard_qspi_defconfig | 31 +++
include/configs/ls1088aqds.h
From: Ashish Kumar
Signed-off-by: Ashish Kumar
---
arch/arm/dts/fsl-ls2080a-rdb.dts |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm/dts/fsl-ls2080a-rdb.dts b/arch/arm/dts/fsl-ls2080a-rdb.dts
index 1a1813b..71d1969 100644
--- a/arch/arm/dts/fsl-ls2080a-rdb.dts
From: Ashish Kumar
* Increase default hugepage count to 256 from 16
* Note: default env variables are stored at 0x58020/0x58420
of size 0x2000
Signed-off-by: Ashish Kumar
---
include/configs/ls2080a_common.h |2 +-
include/configs/ls2080ardb.h |2 +-
2 files changed
* Increase default hugepage count to 256 from 16
* Note: default env variables are stored at 0x58020/0x58420
of size 0x2000
Signed-off-by: Ashish Kumar
---
include/configs/ls2080a_common.h |2 +-
include/configs/ls2080ardb.h |2 +-
2 files changed, 2 insertions(+), 2
Signed-off-by: Ashish Kumar
---
arch/arm/dts/fsl-ls2080a-rdb.dts |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm/dts/fsl-ls2080a-rdb.dts b/arch/arm/dts/fsl-ls2080a-rdb.dts
index 1a1813b..71d1969 100644
--- a/arch/arm/dts/fsl-ls2080a-rdb.dts
+++ b/arch/arm/dts
igned-off-by: Ashish Kumar
---
arch/arm/cpu/armv8/start.S | 20
include/configs/ls2080a_common.h |2 ++
2 files changed, 22 insertions(+), 0 deletions(-)
diff --git a/arch/arm/cpu/armv8/start.S b/arch/arm/cpu/armv8/start.S
index da45d98..dd583c9 100644
--- a/arc
* LS2085ARDB and LS2085AQDS host LS2080A and LS2085A,
So update model and board name.
Signed-off-by: Ashish Kumar
---
arch/arm/dts/fsl-ls2080a-qds.dts|2 +-
arch/arm/dts/fsl-ls2080a-rdb.dts|2 +-
board/freescale/ls2080aqds/ls2080aqds.c |3 +--
board/freescale
Please see inline
Regards
Ashish
-Original Message-
From: york sun [mailto:york@nxp.com]
Sent: Tuesday, January 19, 2016 10:34 PM
To: Ashish Kumar ; u-boot@lists.denx.de
Subject: Re: [PATCH] ARMv8:ls2-2080a: Implement core ERRATA 829520, 833471
On 01/17/2016 11:15 PM, Ashish Kumar
* Return value of ffs64() different to that of __ffs64(),
ffs64(0x8000) = 0x20
__ffs64(0x8000) = 0x1f,
as result of this change -1 from start_align needs to be removed.
* Incorrect DDR law was created in case of B4860qds
* Tested on B4860qds and T1040
Signed-off-by: Ashish
Return value of ffs64() different to that of __ffs64(),
ffs64(0x8000) = 0x20
__ffs64(0x8000) = 0x1f,
as result of this change -1 from start_align needs to be removed.
Incorrect DDR law was created in case of B4860qds
Signed-off-by: Ashish Kumar
---
arch/powerpc/cpu/mpc83xx
Return value of ffs64() different to that of __ffs64(),
ffs64(0x8000) = 0x20
__ffs64(0x8000) = 0x1f,
as result of this change -1 from start_align needs to be removed.
Incorrect DDR law was created in case of B4860qds
Signed-off-by: Ashish Kumar
---
* Test on B4860qds and
igned-off-by: Ashish Kumar
---
v2: Incorporated review comments
arch/arm/cpu/armv8/start.S| 19 +++
arch/arm/include/asm/arch-fsl-layerscape/config.h |4
2 files changed, 23 insertions(+), 0 deletions(-)
diff --git a/arch/arm/cpu/armv8/star
* Valid for core A57
Signed-off-by: Ashish Kumar
---
arch/arm/include/asm/arch-fsl-layerscape/config.h |4
include/configs/ls2080a_common.h |3 ---
2 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h
b
Hello York,
Please see inline.
Regards
Ashish
-Original Message-
From: york sun
Sent: Tuesday, November 08, 2016 12:23 AM
To: Priyanka Jain ; u-boot@lists.denx.de
Cc: Prabhakar Kushwaha ; Ashish Kumar
Subject: Re: [PATCH] driver: net: fsl-mc: Use aligned address for MC FW load
On 10
Hello York,
Please see inline.
Regards
-Original Message-
From: york sun
Sent: Tuesday, November 08, 2016 11:38 PM
To: Ashish Kumar ; Priyanka Jain ;
u-boot@lists.denx.de
Cc: Prabhakar Kushwaha
Subject: Re: [PATCH] driver: net: fsl-mc: Use aligned address for MC FW load
On 11/07
e env lookup function".
Did anyone face similar issue?
I reached this commit("8a3a7e22") after running git bisect.
Log embedded in below mail chain.
Regards
Ashish
> -Original Message-----
> From: Ashish Kumar
> Sent: Thursday, February 8, 2018 3:51 PM
> To: Maxime R
Hello York,
This fixes the crash on LS1088 sd-boot.
Regards
Ashish
> -Original Message-
> From: York Sun
> Sent: Friday, February 16, 2018 9:21 PM
> To: Ashish Kumar ; u-boot@lists.denx.de
> Cc: Pankit Garg ; Maxime Ripard
>
> Subject: Re: Crash observed while run
Signed-off-by: Ashish Kumar
---
include/configs/ls1088aqds.h | 16
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index 5674a5d..1f2161b 100644
--- a/include/configs/ls1088aqds.h
+++ b/include/configs
get_board_ddr_clk(), get_board_sys_clk() and if_board_diff_clk() is now
valid for CONFIG_SPL_BUILD
Signed-off-by: Ashish Kumar
---
board/freescale/ls1088a/ls1088a.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/freescale/ls1088a/ls1088a.c
b/board/freescale/ls1088a
This function is required for enabling access to
early i2c function for correct usage of QIXIS_READ
and QIXIS_WRITE
Signed-off-by: Ashish Kumar
---
board/freescale/ls1088a/ls1088a.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/board/freescale/ls1088a/ls1088a.c
b/board/freescale
and DSPI cannot be accessed in this defconfig.
IFC-NOR image is generated by ls1088aqds_defconfig.
Signed-off-by: Ashish Kumar
---
depends upon:
http://patchwork.ozlabs.org/project/uboot/list/?series=29287
v2:
Remove hardcoded timing for sys, ddr clock
Remove hardcoded timing for IFC
Move
CI-400 bus
from immap_lsch2 to fsl_immap, so that it can be used
for both chasis 2 and chasis 3.
"CONFIG_SYS_CCI400_ADDR" is depricated and new SYS_CCI400_OFFSET
is introduced in Kconfig
Signed-off-by: Ashish Kumar
Signed-off-by: Prabhakar Kushwaha
---
v3:
This is v3 for https://patchw
This config is depricated and new config SYS_CCI400_OFFSET
is introduced in Kconfig
Signed-off-by: Ashish Kumar
---
v3:
This is v3 for https://patchwork.ozlabs.org/patch/731464/
v4:
No change
v5:
NO change
scripts/config_whitelist.txt | 1 -
1 file changed, 1 deletion(-)
diff --git a
0 bus from
immap_ls102xa to fsl_immap, since same is defined there already
"CONFIG_SYS_CCI400_ADDR" is depricated and new SYS_CCI400_OFFSET
is introduced in Kconfig
Signed-off-by: Ashish Kumar
---
v3:
This is v3 for https://patchwork.ozlabs.org/patch/731464/
v4:
No change
v5:
Moving ls
1 - 100 of 223 matches
Mail list logo
