> -----Original Message----- > From: York Sun > Sent: Monday, June 25, 2018 9:05 PM > To: Ashish Kumar <ashish.ku...@nxp.com>; u-boot@lists.denx.de > Cc: Udit Agarwal <udit.agar...@nxp.com>; Priyanka Jain > <priyanka.j...@nxp.com>; Vinitha V Pillai <vinitha.pil...@nxp.com>; Prabhakar > Kushwaha <prabhakar.kushw...@nxp.com>; Mingkai Hu > <mingkai...@nxp.com>; york....@nxp.com.com; Ruchika Gupta > <ruchika.gu...@nxp.com> > Subject: Re: [u-boot-release] [PATCH] configs: Disable 4k erase sector size > for > spansion "s25fs512s" flash > > On 06/25/2018 03:31 AM, Ashish Kumar wrote: > > 4K erase size is used only in case of hydrid mode which is not > > supported on any NXP platform with flash "s25fs512s". > > Supported mode is uniform sector, with erase size 256kiB. > > > > Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> > > --- > > configs/ls1046aqds_qspi_defconfig | 1 + > > configs/ls1046aqds_sdcard_qspi_defconfig | 1 + > > configs/ls1046ardb_qspi_SECURE_BOOT_defconfig | 1 + > > configs/ls1046ardb_qspi_defconfig | 1 + > > configs/ls1088aqds_qspi_SECURE_BOOT_defconfig | 1 + > > configs/ls1088aqds_qspi_defconfig | 1 + > > configs/ls1088aqds_sdcard_qspi_defconfig | 1 + > > configs/ls1088ardb_qspi_SECURE_BOOT_defconfig | 1 + > > configs/ls1088ardb_qspi_defconfig | 1 + > > configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig | 1 + > > configs/ls1088ardb_sdcard_qspi_defconfig | 1 + > > configs/ls2080aqds_qspi_defconfig | 1 + > > configs/ls2088ardb_qspi_SECURE_BOOT_defconfig | 1 + > > configs/ls2088ardb_qspi_defconfig | 1 + > > 14 files changed, 14 insertions(+) > > > > diff --git a/configs/ls1046aqds_qspi_defconfig > > b/configs/ls1046aqds_qspi_defconfig > > index 4f3290c..a770039 100644 > > --- a/configs/ls1046aqds_qspi_defconfig > > +++ b/configs/ls1046aqds_qspi_defconfig > > @@ -41,6 +41,7 @@ CONFIG_SPI=y > > CONFIG_DM_SPI=y > > CONFIG_FSL_DSPI=y > > CONFIG_FSL_QSPI=y > > +CONFIG_SPI_FLASH_USE_4K_SECTORS=n > > Ashish, > > Did you get the defconfig by "savedefconfig"? I think the correct setting is > > # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set Thanks York,
I will use savedefconfig method Regards Ashish > > York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
