Hi Michael,
On 11/18/13 16:10, Michael Trimarchi wrote:
> Enable clocks for the peripherals only if they are used
>
> Signed-off-by: Michael Trimarchi
> ---
> arch/arm/cpu/armv7/omap3/clock.c| 2 --
> arch/arm/include/asm/arch-omap3/clock.h | 2 --
> 2 files changed, 4 deletions(-)
>
>
Hi Igor
On Tue, Nov 19, 2013 at 9:24 AM, Igor Grinberg wrote:
> Hi Michael,
>
> On 11/18/13 16:10, Michael Trimarchi wrote:
>> Enable clocks for the peripherals only if they are used
>>
>> Signed-off-by: Michael Trimarchi
>> ---
>> arch/arm/cpu/armv7/omap3/clock.c| 2 --
>> arch/arm/inc
Hi Igor
On Tue, Nov 19, 2013 at 9:49 AM, Michael Trimarchi
wrote:
> Hi Igor
>
> On Tue, Nov 19, 2013 at 9:24 AM, Igor Grinberg
> wrote:
>> Hi Michael,
>>
>> On 11/18/13 16:10, Michael Trimarchi wrote:
>>> Enable clocks for the peripherals only if they are used
>>>
>>> Signed-off-by: Michael Tri
Hi Eric,
On 19/11/2013 04:40, Eric Nelson wrote:
>> I have a major question: if it is possible to detect at runtime, as you
>> have already implemented, which is the board where code is running, why
>> is it possible to override it for the operator ?
>>
> First off, I want to clarify things. Ther
Hi Eric,
On 19/11/2013 04:25, Eric Nelson wrote:
> I still question the fact that we have two header files for i.MX5x
> and i.MX6x declaring the returns implemented there.
Good point.
>
> It seems that we should have a single header for routines
> implemented there.
>
> Perhaps arch/arm/inclu
Hi Albert,
I have just bisect why on the latest kernel hello world example doesn't work
and I have end up in this patch too. After reverting hello world example
is working.
Also I would like to know if we have still bootm support for standlone
http://www.denx.de/wiki/view/DULG/UBootStandalone#Sec
From: Lars Poeschel
Phytec sells revision or version 3 of pcm051. It is labeled 1358.3 on
the board. The difference for u-boot is that is has other DDR3 RAM on it:
1 x MT41K256M16HA125E instead of 2 x MT41J256M8HX15E on revisions 1 and
2. Both configurations are 512 MiB.
Configure your u-boot bui
Dear "James W.",
In message
you wrote:
>
> You need to code a serial driver protocol. At pc end .you using putty
Why would he?
> > I am working with Uboot only. there is no any kernel or OS. I am running
> > program only dependent on U-boot. It stores result in RAM. Now, i want to
> > transfer
HI Wolfgang Denk ,
Thanks.
I can have Ethernet connection. Can you elaborate how could i do that using
Ethernet only on uboot mode?
--
View this message in context:
http://u-boot.10912.n7.nabble.com/sending-data-from-ram-to-host-machin-in-u-boot-tp167954p167976.html
Sent from the U-Boot maili
Hi Michael,
On 11/19/13 10:59, Michael Trimarchi wrote:
> Hi Igor
>
> On Tue, Nov 19, 2013 at 9:49 AM, Michael Trimarchi
> wrote:
>> Hi Igor
>>
>> On Tue, Nov 19, 2013 at 9:24 AM, Igor Grinberg
>> wrote:
>>> Hi Michael,
>>>
>>> On 11/18/13 16:10, Michael Trimarchi wrote:
Enable clocks for
On Tue, Nov 19, 2013 at 11:02 AM, Pekon Gupta wrote:
>
> OMAP NAND drivers support various ecc-schemes like (HAM1, BCH4, BCH8..)
> And, each ecc-scheme usually has 2 implementations
> - HAM1_HW or BCHx_HW (using in-build h/w engine for all computation)
> - HAM1_SW or BCHx_HW_DETECTION_SW) (usin
Sorry sir .i got it.
在 2013-11-19 PM6:52，"Wolfgang Denk" 写道：
> Dear "James W.",
>
> In message o0mcs4kbu9q0awwpmbyycgg-1z+tg...@mail.gmail.com> you wrote:
> >
> > You need to code a serial driver protocol. At pc end .you using putty
>
> Why would he?
>
> > > I am working with Uboot only. there is
Hi
On Tue, Nov 19, 2013 at 12:10 PM, Igor Grinberg wrote:
> Hi Michael,
>
> On 11/19/13 10:59, Michael Trimarchi wrote:
>> Hi Igor
>>
>> On Tue, Nov 19, 2013 at 9:49 AM, Michael Trimarchi
>> wrote:
>>> Hi Igor
>>>
>>> On Tue, Nov 19, 2013 at 9:24 AM, Igor Grinberg
>>> wrote:
Hi Michael,
>
Hi,
> From: Abraham V. [abraham.varric...@vvdntech.com]
> > Pekon Gupta wrote:
> > OMAP NAND drivers support various ecc-schemes like (HAM1, BCH4, BCH8..)
> > And, each ecc-scheme usually has 2 implementations
> > - HAM1_HW or BCHx_HW (using in-build h/w engine for all computation)
> > - HAM1_S
On Mon, Nov 18, 2013 at 07:02:58PM +0530, Pekon Gupta wrote:
[..]
>
> Pekon Gupta (4):
> mtd: nand: omap: make am33xx/elm.c as common driver for all OMAPx and
> AM platforms
> mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform
> mtd: nand: omap: add CONFIG_NAND_OMA
On Tue, Nov 19, 2013 at 11:02:14AM +0530, Pekon Gupta wrote:
>
> OMAP NAND drivers support various ecc-schemes like (HAM1, BCH4, BCH8..)
> And, each ecc-scheme usually has 2 implementations
> - HAM1_HW or BCHx_HW (using in-build h/w engine for all computation)
> - HAM1_SW or BCHx_HW_DETECTION_S
> From: Scott Wood [mailto:scottw...@freescale.com]
> > On Tue, Sep 10, 2013 at 12:55:07PM +0530, pekon gupta wrote:
> > With increase in NAND flash densities occurence of bit-flips has increased.
> > Thus stronger ECC schemes are required for detecting and correcting
> multiple
> > simultaneous bi
On Tue, Nov 19, 2013 at 05:29:49AM +0100, Heiko Schocher wrote:
> Hello Tom,
>
> Am 18.11.2013 17:00, schrieb Tom Rini:
> >On Mon, Nov 18, 2013 at 11:07:59AM +1100, Graeme Russ wrote:
> >>Hi All,
> >>
> >>You do all realise that we are going about this, to use some British
> >>vernacular, arse-abo
Dear Konstantinos Margaritis,
> (Disclaimer: u-boot newbie)
>
> Hi all,
>
> With Marek's huge help (thanks Marek!) I've tried to merge his tree [1]
> that provides lcd support for the efikamx/efikasb with recent mainline
> uboot. It boots, but I've hit some wall now and couldn't get passed it,
>
Masahiro Yamada writes:
> Before this commit, common/cmd_test.c defined
> _STDBOOL_H in order to avoid including .
> But this work-around is not a good idea.
>
> Blackfin header file
> arch/blackfin/include/asm/blackfin_local.h
> uses bool type here:
> extern bool bfin_os_log_check(void);
>
> T
Hello Scott,
For the kmp204x boards, UBI is used to take care of the volumes created and
deleted on our NAND Flash. I am currently using a 3.10 kernel and when UBI
attaches mtd0, this works fine:
> UBI: attaching mtd0 to ubi0
> UBI: scanning is finished
> UBI: attached mtd0 (name "ubi0", size 128
Dear tvpatel12,
In message <1384859139104-167976.p...@n7.nabble.com> you wrote:
>
> I can have Ethernet connection. Can you elaborate how could i do that using
> Ethernet only on uboot mode?
Enable CONFIG_CMD_TFTPPUT in your board config, and use the tftpput
command.
Best regards,
Wolfgang Den
Dear Marek Vasut,
On Tuesday, November 19, 2013 4:37:00 PM, Marek Vasut wrote:
> Dear Konstantinos Margaritis,
>
> > (Disclaimer: u-boot newbie)
> >
> > Hi all,
> >
> > With Marek's huge help (thanks Marek!) I've tried to merge his tree [1]
> > that provides lcd support for the efikamx/efikasb
On Tue, Nov 19, 2013 at 11:17 AM, Konstantinos Margaritis
wrote:
> (Disclaimer: u-boot newbie)
>
> Hi all,
>
> With Marek's huge help (thanks Marek!) I've tried to merge his tree [1]
> that provides lcd support for the efikamx/efikasb with recent mainline
> uboot. It boots, but I've hit some wall
I'm building U-Boot from the FSLC (repo/fork) on an i.MX6
U-Boot 2013.10-00012-g5bc3118-dirty (Nov 19 2013 - 09:17:18)
CPU: Freescale i.MX6SOLO rev1.1 at 792 MHz
After I made a small change today in the NAND FLASH layout, I can
no longer use UBI from U-Boot. Here's what I see today:
MyBoa
On 11/10/2013 09:25 PM, Jain Priyanka-B32167 wrote:
> Hi,
>
> Dependency of below patch marked under ---
> [U-Boot] powerpc/t1040qds: Add DDR Raw Timing support
> http://patchwork.ozlabs.org/patch/286112/
> no longer holds true as thi patch has been deferred.
>
> But below emulator patch
Hello Wolfgang,
Am 19.11.2013 08:12, schrieb Wolfgang Denk:
Dear Heiko,
In message<528ae93d.2080...@denx.de> you wrote:
- Maybe a cmdline interface to change the state of a patch, so I do not
need to open a webbrowser (not necessary, would just nice ;-)
This can be done using existing
Hello Tom,
Am 19.11.2013 16:10, schrieb Tom Rini:
On Tue, Nov 19, 2013 at 05:29:49AM +0100, Heiko Schocher wrote:
Hello Tom,
Am 18.11.2013 17:00, schrieb Tom Rini:
On Mon, Nov 18, 2013 at 11:07:59AM +1100, Graeme Russ wrote:
Hi All,
You do all realise that we are going about this, to use so
On Tue, 2013-11-19 at 13:21 +, Gupta, Pekon wrote:
> > From: Scott Wood [mailto:scottw...@freescale.com]
> > > On Tue, Sep 10, 2013 at 12:55:07PM +0530, pekon gupta wrote:
> > > With increase in NAND flash densities occurence of bit-flips has
> > > increased.
> > > Thus stronger ECC schemes ar
Hi Pekon,
Thank you for you advices.
http://processors.wiki.ti.com/index.php/AM35x-OMAP35x-PSP_04.02.00.07_UserGuide#Selecting_NAND_ECC_scheme_for_Linux_Kernelacvices
selecting "Selecting NAND ECC scheme for Linux Kernel" by editing:
arch/arm/mach-omap2/board-flash.c
and
drivers/mtd/nand/omap2.c
I
On Tue, Nov 19, 2013 at 10:09:44AM +0100, Michal Simek wrote:
> Hi Albert,
>
> I have just bisect why on the latest kernel hello world example doesn't work
> and I have end up in this patch too. After reverting hello world example
> is working.
>
> Also I would like to know if we have still bootm
On Tue, Nov 19, 2013 at 11:22:18AM +0100, Lars Poeschel wrote:
> From: Lars Poeschel
>
> Phytec sells revision or version 3 of pcm051. It is labeled 1358.3 on
> the board. The difference for u-boot is that is has other DDR3 RAM on it:
> 1 x MT41K256M16HA125E instead of 2 x MT41J256M8HX15E on rev
> -Original Message-
> From: Pekon Gupta [mailto:pe...@ti.com]
[...]
>
> Pekon Gupta (4):
> mtd: nand: omap: make am33xx/elm.c as common driver for all OMAPx and
> AM platforms
> mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform
> mtd: nand: omap: add CONF
Hi Leif,
On 11/18/2013 12:26 PM, Leif Lindholm wrote:
Commit fe1378a - "ARM: use r9 for gd" - broke the ABI for users of the
U-Boot API on ARM. Users I am aware of are GRUB and the FreeBSD loader.
Since I only spotted this on Saturday, this code is well and truly in
the wild, so any users of the
On Tue, 2013-11-19 at 17:01 +0100, Valentin Longchamp wrote:
> Hello Scott,
>
> For the kmp204x boards, UBI is used to take care of the volumes created and
> deleted on our NAND Flash. I am currently using a 3.10 kernel and when UBI
> attaches mtd0, this works fine:
>
> > UBI: attaching mtd0 to u
On Tue, 2013-11-19 at 13:21 +, Gupta, Pekon wrote:
> > From: Scott Wood [mailto:scottw...@freescale.com]
> > > On Tue, Sep 10, 2013 at 12:55:07PM +0530, pekon gupta wrote:
> > > With increase in NAND flash densities occurence of bit-flips has
> > > increased.
> > > Thus stronger ECC schemes ar
On Mon, 2013-11-18 at 19:03 +0530, Pekon Gupta wrote:
> @@ -763,77 +903,47 @@ static void __maybe_unused omap_free_bch(struct
> mtd_info *mtd)
> * @eccstrength - the number of bits that could be corrected
> * (1 - hamming, 4 - BCH4, 8 - BCH8, 16 - BCH16)
> */
> +obj-$(CONFIG_PPC) += api_platform-powerpc.c
I made a mistake here.
s/api_platform-powerpc.c/api_platform-powerpc.o/
I will post version 2.
Best Regards
Masahiro Yamada
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/li
In config_cmd_default.h, it will use CONFIG_SYS_NO_FLASH to decide
whether include CONFIG_CMD_FLASH and CONFIG_CMD_IMLS. So, if the
CONFIG_SYS_NO_FLASH defined later than include/config_cmd_default.h,
These two commands will be included always.
So move CONFIG_SYS_NO_FLASH definition to proper posi
All objects under api/ and examples/api/ directories are selected
by CONFIG_API.
So we can move CONFIG_API switch to the top Makefile.
In order to use CONFIG_API, the definition of SUBDIR_EXAMPLES-y
must be moved after "sinlude $(obj)include/autoconf.mk".
Signed-off-by: Masahiro Yamada
---
Chan
> From: Scott Wood [mailto:scottw...@freescale.com]
> On Mon, 2013-11-18 at 19:03 +0530, Pekon Gupta wrote:
> > @@ -763,77 +903,47 @@ static void __maybe_unused
> omap_free_bch(struct mtd_info *mtd)
> > * @eccstrength- the number of bits that could be corrected
> > *
Some board have multiple configurations.
For example, the board "m54455evb" has many configurations:
M54455EVB, M54455EVB_a66, M54455EVB_i66, M54455EVB_intel, ...
When we modify board-related files, we need to test
all configurations based on such a board.
In such a case, the new option -b is use
Hello Mans
> > +/*
> > + * Undef true and false here to avoid macro expansion by
> > + */
> > +#undef true
> > +#undef false
>
> This won't work if stdbool.h defines true/false as an enum. Some
> versions of gcc did this. The correct fix is to change the code so it
Thanks for your comments.
T
Hi Matti,
> From: matti kaasinen [mailto:matti.kaasi...@gmail.com]
> I try to use Angstrom distribution as a base for my design. Angstrom provides
> 3.8.13 kernel for beaglebone. There drivers/mtd/nand/omap2.c seems pretty
> demanding as far as changing chip->ecc.bytes configuration is concerne
Hi Vadim,
On Wed, Nov 20, 2013 at 4:21 AM, Vadim Bendebury (вб) wrote:
> e
>
> On Sun, Nov 17, 2013 at 11:31 AM, Wolfgang Denk wrote:
>
> Dear Wolfgang,
>
> > [snip..]
> > Maybe I'm wrong, but my understanding was that we were not primarily
> > interested in introducing better project managemen
On Mon, 2013-11-18 at 18:05 +0100, Giuseppe Pagano wrote:
>
> >
> > > + ksz9031_phy_extended_write(phydev, 0x02,
> > > +MII_KSZ9031_EXT_RGMII_CLOCK_SKEW,
> > > +MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x03FF);
> >
> I have september 2012 revision
46 matches
Mail list logo
