Hi Matti, > From: matti kaasinen [mailto:matti.kaasi...@gmail.com] > I try to use Angstrom distribution as a base for my design. Angstrom provides > 3.8.13 kernel for beaglebone. There drivers/mtd/nand/omap2.c seems pretty > demanding as far as changing chip->ecc.bytes configuration is concerned. That > feature seems hard-coded with numeric literal 13 everywhere in that file. So, > changing that to 14 does not seem too good idea with my understanding level > of that module operation. > I have no clue about 3.8.13 kernel provided along with SDK, as there is as separate team in TI to support that. However I know is that beaglebone with NAND cape was not up on that kernel becoz many of the DT and GPMC updates were not present in that kernel version. So even if you take my patches (of u-boot), I doubt that you would be able to boot kernel from beaglebone.
If you need support for 3.8.13 kernel, I suggest you refer to post a query to e2e.ti.com forum. I don't know if you would be able to get any help in this maillist. But if you plan to use mainline. These patches work fine. with regards, pekon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
