In config_cmd_default.h, it will use CONFIG_SYS_NO_FLASH to decide
whether include CONFIG_CMD_FLASH and CONFIG_CMD_IMLS. So, if the
CONFIG_SYS_NO_FLASH defined later than include/config_cmd_default.h,
These two commands will be included always.
So move CONFIG_SYS_NO_FLASH definition to proper position.
Signed-off-by: Bo Shen <voice.s...@atmel.com>
---
include/configs/at91sam9m10g45ek.h | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/include/configs/at91sam9m10g45ek.h
b/include/configs/at91sam9m10g45ek.h
index 2095fe6..eb86239 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -77,6 +77,10 @@
/*
* Command line configuration.
*/
+
+/* No NOR flash */
+#define CONFIG_SYS_NO_FLASH
+
#include <config_cmd_default.h>
#undef CONFIG_CMD_BDI
#undef CONFIG_CMD_FPGA
@@ -97,9 +101,6 @@
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
-/* No NOR flash */
-#define CONFIG_SYS_NO_FLASH
-
/* NAND flash */
#ifdef CONFIG_CMD_NAND
#define CONFIG_NAND_ATMEL
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
