On Tue, Nov 19, 2013 at 11:02:14AM +0530, Pekon Gupta wrote: > > OMAP NAND drivers support various ecc-schemes like (HAM1, BCH4, BCH8..) > And, each ecc-scheme usually has 2 implementations > - HAM1_HW or BCHx_HW (using in-build h/w engine for all computation) > - HAM1_SW or BCHx_HW_DETECTION_SW) (using software library for some > computation) > [..] > > > Pekon Gupta (4): > mtd: nand: omap: optimize chip->ecc.hwctl() for H/W ECC schemes > mtd: nand: omap: optimize chip->ecc.calculate() for H/W ECC schemes > mtd: nand: omap: optimized chip->ecc.correct() for H/W ECC schemes > board/ti/am335x/README: update for NAND boot > > arch/arm/include/asm/omap_gpmc.h | 7 - > board/ti/am335x/README | 53 ++-- > drivers/mtd/nand/omap_gpmc.c | 565 > +++++++++++++-------------------------- > 3 files changed, 217 insertions(+), 408 deletions(-) >
Tested-by: Ezequiel Garcia <ezequiel.gar...@free-electrons.com> -- Ezequiel García, Free Electrons Embedded Linux, Kernel and Android Engineering http://free-electrons.com _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
