From: shaohui xie
TBI PHY address (TBIPA) register is set in general frame manager
phy init funciton dtsec_init_phy() in drivers/net/fm/eth.c, and
it is supposed to set TBIPA on FM1@DTSEC1 in case of FM1@DTSEC1
isn't used directly, which provides MDIO for other ports. So
following code is wrong i
Current espi controller driver assumes the command length of write command is
not equal to '1', it was made based on SPANSION SPI flash, but some SPI flash
driver such as SST does use write command length as '1', so write command on
SST SPI flash will not work. And the length check for write comman
Am 12/10/2012 04:08, schrieb Marek Vasut:
> Dear Tom Rini,
>
>> The SPI flash is not properly detected by plain "sf probe" due to
>> it being located on different bus and different chipselect. Fix
>> this problem.
>>
>> Signed-off-by: Marek Vasut
>> Cc: Stefano Babic
>> Cc: Tom Rini
> [...]
>
Hi Stefano,
> Am 05/10/2012 10:16, schrieb Lukasz Majewski:
> > Now it is possible to provide specific function per PMIC/power
> > device instance.
> >
> > Signed-off-by: Lukasz Majewski
> > Signed-off-by: Kyungmin Park
> > ---
> > Changes for v2:
> > - New at patch v2
> > ---
>
> Hi Lucasz,
>
Dear Stefano Babic,
> Am 12/10/2012 04:08, schrieb Marek Vasut:
> > Dear Tom Rini,
> >
> >> The SPI flash is not properly detected by plain "sf probe" due to
> >> it being located on different bus and different chipselect. Fix
> >> this problem.
> >>
> >> Signed-off-by: Marek Vasut
> >> Cc: Ste
Hi Minkyu,
On Fri, 12 Oct 2012 15:45:24 +0900, Minkyu Kang
wrote:
> On 12 October 2012 15:39, Minkyu Kang wrote:
> > Dear Albert,
> >
> > On 12 October 2012 14:53, Albert ARIBAUD wrote:
> >> Hi all,
> >>
> >> I am sending this notice because I have force-pushed a rollback of
> >> u-boot-arm/ma
Dear All,
> -Original Message-
> From: Minkyu Kang [mailto:proms...@gmail.com]
> Sent: Friday, October 12, 2012 8:47 AM
> To: Albert ARIBAUD; Piotr Wilczek
> Cc: U-Boot; Tom Rini; Marek Vasut
> Subject: Re: [U-Boot] Pull request: u-boot-arm/master to u-boot/master
>
> On 12 October 2012 1
Hi Scott,
On Thu, 11 Oct 2012 13:59:31 -0500, Scott Wood
wrote:
> On 10/11/2012 01:45:02 PM, Albert ARIBAUD wrote:
> > Hi Scott,
> >
> > On Thu, 11 Oct 2012 13:13:33 -0500, Scott Wood
> > wrote:
> >
> > > FWIW I think putting policy documents in a wiki, without any
> > > guidance on who's sup
Am 12/10/2012 10:07, schrieb Marek Vasut:
> Dear Stefano Babic,
>
>> Am 12/10/2012 04:08, schrieb Marek Vasut:
>>> Dear Tom Rini,
>>>
The SPI flash is not properly detected by plain "sf probe" due to
it being located on different bus and different chipselect. Fix
this problem.
Hi Marek,
On Wed, 10 Oct 2012 00:43:33 +0200, Marek Vasut wrote:
> Rework the RX buffer init so that it's easier to understand.
> Firstly, allocate the whole RX buffer as one large continuous
> piece of memory. Also, drop all these writel() accessors used
> on the FEC RX DMA descriptor, since it
LAN8720 PHY is used on Freescale C2X0QDS board.
Signed-off-by: Mingkai Hu
diff --git a/include/config_phylib_all_drivers.h
b/include/config_phylib_all_drivers.h
index 1db7cec..12828c6 100644
--- a/include/config_phylib_all_drivers.h
+++ b/include/config_phylib_all_drivers.h
@@ -23,6 +23,7 @@
#
I am working on a embedded board that uses a BF537 (Blackfin) and
ISP1362 USB controller. I want to access a USB flash drive from
U-Boot. But I haven't been able to find the drivers for the ISP1362.
I have found two other U-Boot target platforms that at least reference
the ISP1362:
In include/co
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 10/12/12 03:00, Albert ARIBAUD wrote:
> Hi Minkyu,
>
> On Fri, 12 Oct 2012 15:45:24 +0900, Minkyu Kang
> wrote:
>
>> On 12 October 2012 15:39, Minkyu Kang
>> wrote:
>>> Dear Albert,
>>>
>>> On 12 October 2012 14:53, Albert ARIBAUD
>>> wrote
This patch series adds Register base addresses, clock, gpio, power
and system structures for Exynos4x10.
Piotr Wilczek (6):
Exynos: Exynos4x10: Add base addresses for Exynos4x10
Exynos: Exynos4x10: Add clock structure for exynos4x10
Exynos: Exynos4x10: Add gpio structure for Exynos4X10
Exy
This patch add base addresses for Exynos4x10 registers.
Signed-off-by: Piotr Wilczek
Signed-off-by: Kyungmin Park
CC: Minkyu Kang
---
Depends on <1349171443-13624-1-git-send-email-chander.kash...@linaro.org>
arch/arm/include/asm/arch-exynos/cpu.h | 43 ---
1 file
This patch adds clock structure for Exynos4x10.
Signed-off-by: Piotr Wilczek
Signed-off-by: Kyungmin Park
CC: Minkyu Kang
---
arch/arm/include/asm/arch-exynos/clock.h | 236 ++
1 files changed, 236 insertions(+), 0 deletions(-)
diff --git a/arch/arm/include/asm/ar
This patch adds gpio structure for Exynos4x10.
Signed-off-by: Piotr Wilczek
Signed-off-by: Kyungmin Park
CC: Minkyu Kang
---
arch/arm/include/asm/arch-exynos/gpio.h | 47 +++
1 files changed, 47 insertions(+), 0 deletions(-)
diff --git a/arch/arm/include/asm/arch
This patch adds power structure for Exynos4x10.
Signed-off-by: Piotr Wilczek
Signed-off-by: Kyungmin Park
CC: Minkyu Kang
---
arch/arm/include/asm/arch-exynos/power.h | 201 ++
1 files changed, 201 insertions(+), 0 deletions(-)
diff --git a/arch/arm/include/asm/ar
This patch adds sysreg structure for Exynos4x10.
Signed-off-by: Piotr Wilczek
Signed-off-by: Kyungmin Park
CC: Minkyu Kang
---
arch/arm/include/asm/arch-exynos/system.h |9 +
1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/arch/arm/include/asm/arch-exynos/system.h
b
This patch use exynos4x10 structures on Trats board.
Signed-off-by: Piotr Wilczek
Signed-off-by: Kyungmin Park
CC: Minkyu Kang
---
board/samsung/trats/trats.c | 40
1 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/board/samsung/trats/t
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 10/11/12 22:29, Stefan Roese wrote:
> On 10/11/2012 08:30 PM, Scott Wood wrote:
>>> But, yes, it bears more thinking if we want the next branch
>>> open for longer than it has historically been, if we want
>>> that. And we have at least historicall
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 10/11/12 18:15, Simon Glass wrote:
> From: Gabe Black
>
> This change adds a board overridable function which can be used to
> decide whether or not to initialize the i8042 keyboard controller.
> On systems where it isn't actually connected to any
Dear Piotr,
On 13 October 2012 00:08, Piotr Wilczek wrote:
> This patch series adds Register base addresses, clock, gpio, power
> and system structures for Exynos4x10.
>
> Piotr Wilczek (6):
> Exynos: Exynos4x10: Add base addresses for Exynos4x10
> Exynos: Exynos4x10: Add clock structure for
Marc,
> -Original Message-
> From: Thierry Reding [mailto:thierry.red...@avionic-design.de]
> Sent: Wednesday, October 03, 2012 10:59 PM
> To: Marc Dietrich
> Cc: u-boot@lists.denx.de; Stephen Warren; Tom Warren; Lucas Stach
> Subject: Re: [PATCH] tegra: move common features to a common ma
There used to be a huge structure duplicated 3 times in the source.
Signed-off-by: Joe Hershberger
---
common/env_common.c | 97 +---
common/env_embedded.c | 104 ++
include/env_default.h | 135 +++
On Fri, Oct 12, 2012 at 03:36:56AM +0200, Marek Vasut wrote:
> The SPI flash is not properly detected by plain "sf probe" due to
> it being located on different bus and different chipselect. Fix
> this problem.
>
> Signed-off-by: Marek Vasut
> Cc: Stefano Babic
> Cc: Tom Rini
Applied to u-boo
On Fri, Oct 12, 2012 at 1:25 AM, Shaohui Xie wrote:
> From: shaohui xie
>
> TBI PHY address (TBIPA) register is set in general frame manager
> phy init funciton dtsec_init_phy() in drivers/net/fm/eth.c, and
> it is supposed to set TBIPA on FM1@DTSEC1 in case of FM1@DTSEC1
> isn't used directly, w
From: Stephen Warren
The ULPI port is routed onto pins on the mini PCI Express connector. A
standard breakout board may be used to access the port.
* Add required DT entries to configure the ULPI port.
* Setup up the ULPI pinmux in the board code.
* Enable multiple USB controller and ULPI suppor
From: Stephen Warren
The device tree already contains the required configuration for both the
USB1 and USB3 ports. Enable the required configuration options to enable
both these ports, which in turn allows the USB1 port to be used.
Note that on a true Seaboard, this port is typically used as a d
From: Stephen Warren
Port USB1 on Whistler is intended as a device port for USB recovery.
Whistler's DT currently contains an alias for this USB port, even though
Whistler's config doesn't enable multiple USB controllers, so the alias
is unused. Remove the unused alias for consistency for now. Si
I have a Windows 7 development machine that I cannot verify ethernet
connectivity with my P2041RDB QorIQ platfrom running u-boot. The two devices
are connected using a crossover cable. When I try to ping from the P2041 to
the Windows 7, the ping returns No link. I verified that my dev machine
This was introduced in:
8679d0ffdcc0beafea8e6942c0c67cf859afa18e -
COMMON: Use __stringify() instead of MK_STR()
The header is now needed since common.h is not included in this tool.
Signed-off-by: Joe Hershberger
---
tools/env/fw_env.c | 1 +
1 file changed, 1 insertion(+)
diff --git
This is a second stab at the linker-generated array. Basically, this
concept is a generic abstraction of how u_boot_cmd works today. The
patch 2/4 contains a huge pile of documentation which should clarify
most of the questions.
I don't see size growth, I see size fluctiation in the order of tens
This patch adds support for linker-generated array. These arrays
are a generalization of the U-Boot command declaration approach.
Basically, the idea is to generate an array, where elements of the
array are statically initialized at compile time and each element
is declared separatelly at differen
This patch adds essential components for generation of the contents of
the linker section that is used by the linker-generated array. All of
the contents is held in a separate file, u-boot.lst, which is generated
at runtime just before U-Boot is linked.
The purpose of this code is to especially ge
Implement kerneldoc template for linker-generated arrays. This is
the first template in U-Boot that is used to generate kerneldoc
style documentation. This template is very basic.
Signed-off-by: Marek Vasut
---
doc/DocBook/Makefile |2 +-
doc/DocBook/linker_lists.tmpl | 46 +++
This patch converts the old method of creating a list of command
onto the new LG-arrays code. The old u_boot_cmd section is converted
to new u_boot_list_cmd subsection and LG-array macros used as needed.
Minor adjustments had to be made to the common code to work with the
LG-array macros, mostly t
Hi Michal,
Hi David
which version of binutils and gcc you are currently using for embedded
Linux development? Just now I've played a little bit with the new one
I've found in the Xilinx git repository on:
git://git.xilinx.com/microblaze-gnu.git
Unfortunately both the binaries and the sources see
Folks,
u-boot-tegra/next has been updated with new patches from Lucas, Marc, and
Stephen, rebased against u-boot-arm, and pushed to denx.de.
Please use this for any future patches, and if you have patches under
review, please rebase them if they no longer apply cleanly.
I'm going to be on vacati
Hey all,
As a reminder, v2012.10 is going to be released on Monday. If you have
any critical patches that are not current applied please let me (and any
relevant custodian) know ASAP. Thanks!
--
Tom
signature.asc
Description: Digital signature
___
On 10/12/2012 03:26 PM, Tom Warren wrote:
> Folks,
>
> u-boot-tegra/next has been updated with new patches from Lucas, Marc, and
> Stephen, rebased against u-boot-arm, and pushed to denx.de.
u-boot-tegra/next right now is based on u-boot-arm/master, but includes
patches that are both:
a) Already
On 10/12/2012 05:11:17 AM, Albert ARIBAUD wrote:
Hi Scott,
On Thu, 11 Oct 2012 13:59:31 -0500, Scott Wood
wrote:
> On 10/11/2012 01:45:02 PM, Albert ARIBAUD wrote:
> > Hi Scott,
> >
> > On Thu, 11 Oct 2012 13:13:33 -0500, Scott Wood
> > wrote:
> >
> > > FWIW I think putting policy documents i
Dear Joe Hershberger,
> This was introduced in:
> 8679d0ffdcc0beafea8e6942c0c67cf859afa18e -
> COMMON: Use __stringify() instead of MK_STR()
>
> The header is now needed since common.h is not included in this tool.
Good find. This is -next, right ?
> Signed-off-by: Joe Hershberger
> ---
Hi Graeme,
On Thu, Oct 11, 2012 at 8:55 PM, Graeme Russ wrote:
> Hi Simon,
>
> On Fri, Oct 12, 2012 at 12:15 PM, Simon Glass wrote:
>
>> diff --git a/drivers/input/i8042.c b/drivers/input/i8042.c
>> index c3bc536..99254e4 100644
>> --- a/drivers/input/i8042.c
>> +++ b/drivers/input/i8042.c
>> @@
From: Gabe Black
This change adds a board overridable function which can be used to decide
whether or not to initialize the i8042 keyboard controller. On systems where
it isn't actually connected to anything, this can save a significant amount of
boot time.
On Stumpy, this saves about 200ms on b
From: Gabe Black
On x86, the i8042 keyboard controller driver frequently waits for the keyboard
input buffer to be empty to make sure the controller has had a chance to
process the data it was given. The way the delay loop was structured, if the
controller hadn't cleared the corresponding status
Add support for an i8042 keyboard controller.
Signed-off-by: Simon Glass
---
include/configs/coreboot.h |4
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h
index 0e89242..a0d3d44 100644
--- a/include/configs/coreboot
Hi Tom,
On Fri, Oct 12, 2012 at 9:05 AM, Tom Rini wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On 10/11/12 18:15, Simon Glass wrote:
>> From: Gabe Black
>>
>> This change adds a board overridable function which can be used to
>> decide whether or not to initialize the i8042 keybo
The global_data and bd_info structures for each board have different types
for the baudrate and bi_baudrate fields. This series lines them all up to
be the same.
There is some discussion on the list about using u32 instead of 'unsigned
int'. These are equivalent on all current architectures, and o
This doesn't need to be a long, so change it.
Also adjust bi_baudrate to be unsigned.
Signed-off-by: Simon Glass
---
arch/blackfin/include/asm/global_data.h |2 +-
arch/blackfin/include/asm/u-boot.h |2 +-
arch/blackfin/lib/board.c |2 +-
common/cmd_bdinfo.c
These don't need to be longs, so change them.
Signed-off-by: Simon Glass
---
arch/openrisc/include/asm/global_data.h |2 +-
arch/openrisc/include/asm/u-boot.h |2 +-
common/cmd_bdinfo.c |2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arc
These don't need to be longs, so change them.
Signed-off-by: Simon Glass
---
arch/m68k/include/asm/global_data.h |2 +-
arch/m68k/include/asm/u-boot.h |2 +-
common/cmd_bdinfo.c |2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/m68k/inclu
These don't need to be longs, so change them.
Signed-off-by: Simon Glass
---
arch/nios2/include/asm/global_data.h |2 +-
arch/nios2/include/asm/u-boot.h |2 +-
common/cmd_bdinfo.c |2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/nios2/i
These don't need to be longs, so change them.
Signed-off-by: Simon Glass
---
arch/avr32/include/asm/global_data.h |2 +-
arch/avr32/include/asm/u-boot.h |2 +-
common/cmd_bdinfo.c |2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/avr32/i
These don't need to be longs, so change them.
Signed-off-by: Simon Glass
---
arch/sh/include/asm/global_data.h |2 +-
arch/sh/include/asm/u-boot.h |2 +-
common/cmd_bdinfo.c |2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/sh/include/asm/g
These don't need to be longs, so change them.
Signed-off-by: Simon Glass
---
arch/powerpc/include/asm/global_data.h |2 +-
arch/powerpc/include/asm/u-boot.h |2 +-
common/cmd_bdinfo.c|2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/p
This does not need to be a long, so change it.
Also adjust bi_baudrate to be unsigned.
Signed-off-by: Simon Glass
---
arch/arm/include/asm/global_data.h |2 +-
arch/arm/include/asm/u-boot.h |2 +-
common/cmd_bdinfo.c|2 +-
3 files changed, 3 insertions(+), 3 del
This doesn't need to be a long, so change it.
Also adjust bi_baudrate to be unsigned.
Signed-off-by: Simon Glass
---
arch/mips/include/asm/global_data.h |2 +-
arch/mips/include/asm/u-boot.h |2 +-
common/cmd_bdinfo.c |2 +-
3 files changed, 3 insertions(+), 3 d
These don't need to be longs, so change them.
Signed-off-by: Simon Glass
---
arch/microblaze/include/asm/global_data.h |2 +-
arch/microblaze/include/asm/u-boot.h |2 +-
common/cmd_bdinfo.c |2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git
These don't need to be longs, so change them.
Signed-off-by: Simon Glass
---
arch/sparc/include/asm/global_data.h |2 +-
arch/sparc/include/asm/u-boot.h |2 +-
common/cmd_bdinfo.c |2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/sparc/i
This doesn't need to be a long, so change it.
Signed-off-by: Simon Glass
---
arch/x86/include/asm/global_data.h |2 +-
common/cmd_bdinfo.c|2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/x86/include/asm/global_data.h
b/arch/x86/include/asm/globa
This doesn't need to be a long, so change it.
Also adjust bi_baudrate to be unsigned.
Signed-off-by: Simon Glass
---
arch/nds32/include/asm/global_data.h |2 +-
arch/nds32/include/asm/u-boot.h |2 +-
common/cmd_bdinfo.c |2 +-
3 files changed, 3 insertions(+),
This doesn't need to be a long, so change it.
Signed-off-by: Simon Glass
---
arch/sandbox/include/asm/global_data.h |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/sandbox/include/asm/global_data.h
b/arch/sandbox/include/asm/global_data.h
index 581fd2f..78a751d 10
From: Gabe Black
The size of an LBA type changes depending on this option. We need to
use a different printf() string in each case, so create a define for
this.
Signed-off-by: Gabe Black
Signed-off-by: Simon Glass
---
include/ide.h |2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
From: Gabe Black
usb_storage wouldn't compile when the CONFIG_SYS_64BIT_LBA option is
turned on because the used fixed size data types in their exported
functions when they should have used lbaint_t for the block count
parameter. That meant that when the sizes happened to be the same, when
using
Enable Coreboot and EXT4 Filesystems on the coreboot board.
Signed-off-by: Simon Glass
---
include/configs/coreboot.h |3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h
index 0e89242..3df085b 100644
--- a/include/con
From: Gabe Black
Currently, if the disk partition code is compiled with all of the parition
types compiled out, it hits an #error which stops the build. This change
adjusts that file so that those functions will fall through to their defaults
in those cases instead of breaking the build. These fu
From: Gabe Black
This change adds CBFS support and some commands to use it to u-boot. These
commands are:
cbfsinit - Initialize CBFS support and pull all metadata into RAM. The end of
the ROM is an optional parameter which defaults to the standard 0x and
can be used to support multiple C
From: Stefan Reinauer
ChromeOS uses a GPT partition table to partition the disk.
However, Windows will refuse to install on a GPT partitioned
disk if there is no EFI available (Even if there is an MBR, too)
To hide the GPT partition table from Windows, we need to write
it with a header magic othe
From: Taylor Hutt
This change addresses a few printf-formatting errors, and a typecast
error.
Signed-off-by: Taylor Hutt
Signed-off-by: Simon Glass
---
disk/part_efi.c |7 ---
1 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/disk/part_efi.c b/disk/part_efi.c
index 264ea9
Hi Stephen,
On Wed, Oct 10, 2012 at 5:05 PM, Stephen Warren wrote:
> From: Stephen Warren
>
> fs/Makefile is unused. The top-level Makefile sets LIBS-y += fs/xxx and
> hence causes make to directly descend two directory levels into each
> individual filesystem, and it never descends into fs/ its
On 10/11/2012 10:21:07 AM, Scott Wood wrote:
On 10/11/2012 04:01:27 AM, Prabhakar Kushwaha wrote:
On 10/11/2012 05:51 AM, Scott Wood wrote:
I'm debugging some SPL changes and am still having a hard time
following the initial TLB flow. We seem to be creating an entry in
AS0 -- how is that no
Dear Simon Glass,
> From: Gabe Black
>
> usb_storage wouldn't compile when the CONFIG_SYS_64BIT_LBA option is
> turned on because the used fixed size data types in their exported
> functions when they should have used lbaint_t for the block count
> parameter. That meant that when the sizes happe
Dear xian...@openmobilefree.net,
> From: Xiangfu
>
> The JZ4740 CPU can load 8KB from two different addresses:
>1. the normal area up to 8KB starting from NAND flash address 0x
>2. the backup area up to 8KB starting from NAND flash address 0x2000
>
> After create u-boot-
Dear xian...@openmobilefree.net,
> From: Xiangfu
>
> JZ4740 CPU have a internal ROM have such kind of code, that make
> JZ4740 can boot from USB
>
> usbboot.S can downloads user program from the USB port to internal
> SRAM and branches to the internal SRAM to execute the program
>
> Si
Hi Marek,
On Fri, Oct 12, 2012 at 5:20 PM, Marek Vasut wrote:
> Dear Joe Hershberger,
>
>> This was introduced in:
>> 8679d0ffdcc0beafea8e6942c0c67cf859afa18e -
>> COMMON: Use __stringify() instead of MK_STR()
>>
>> The header is now needed since common.h is not included in this tool.
>
> G
From: Stefan Reinauer
sysinfo.c only contains the lib_sysinfo data structure which
is used/filled by tables.c. This split was introduced by importing
code from libpayload originally, but to keep the code simple, add
the single line of actual code to tables.c
Signed-off-by: Stefan Reinauer
Signe
From: Vadim Bendebury
This patch builds upon the recently introduced CBMEM console
feature of coreboot.
CBMEM console uses a memry area allocated by coreboot to store
the console output. The memory area has a certain structure,
which allows to determine where the buffer is, the buffer size
and t
Add support for decoding tags for GPIOs, compile/build info, cbmem and
other features.
Signed-off-by: Stefan Reinauer
Signed-off-by: Vadim Bendebury
Signed-off-by: Gabe Black
Signed-off-by: Simon Glass
---
arch/x86/cpu/coreboot/tables.c | 109 -
arch/x8
We want to support VGA, serial, USB keyboard and the Coreboot memory
console buffer.
Signed-off-by: Simon Glass
---
include/configs/coreboot.h |7 +++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h
index 2649b82..fe5
From: Vadim Bendebury
This command is useful to allow to observe messages generated by
coreboot and u-boot until present. In particular it is handy when
u-boot is instrumented to fall through into console mode on startup
errors.
Signed-off-by: Vadim Bendebury
Signed-off-by: Simon Glass
---
dr
81 matches
Mail list logo
