[U-Boot] [PATCH] powerpc/fm: fix TBI PHY address settings

[Shaohui Xie]

From: shaohui xie <shaohui....@freescale.com>

TBI PHY address (TBIPA) register is set in general frame manager
phy init funciton dtsec_init_phy() in drivers/net/fm/eth.c, and
it is supposed to set TBIPA on FM1@DTSEC1 in case of FM1@DTSEC1
isn't used directly, which provides MDIO for other ports. So
following code is wrong in case of FM2, which has a different
mac base.

struct dtsec *regs = (struct dtsec *)fm_eth->mac->base;
/* Assign a Physical address to the TBI */
out_be32(&regs->tbipa, CONFIG_SYS_TBIPA_VALUE);

Signed-off-by: Shaohui Xie <shaohui....@freescale.com>
---
 drivers/net/fm/eth.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c
index 2b616ad..c8dc1d0 100644
--- a/drivers/net/fm/eth.c
+++ b/drivers/net/fm/eth.c
@@ -65,7 +65,7 @@ void dtsec_configure_serdes(struct fm_eth *priv)
 static void dtsec_init_phy(struct eth_device *dev)
 {
        struct fm_eth *fm_eth = dev->priv;
-       struct dtsec *regs = (struct dtsec *)fm_eth->mac->base;
+       struct dtsec *regs = (struct dtsec *)CONFIG_SYS_FSL_FM1_DTSEC1_ADDR;
 
        /* Assign a Physical address to the TBI */
        out_be32(&regs->tbipa, CONFIG_SYS_TBIPA_VALUE);
-- 
1.6.4


_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot