Linux 6.6.y with KASLR enabled would print the following message on boot:
"
KASLR disabled due to lack of seed
"
Enable the 'kaslrseed' command so a random number seed can be pulled
from CAAM and inserted into the /chosen node 'kaslr-seed' property of
Linux kernel DT before boot, thus letting KASLR
On Sat, Jan 20, 2024 at 01:14:04AM +0100, kleines Filmröllchen wrote:
> The -ffixed-gp option of GCC has an exact equivalent of -ffixed-x3 in
> Clang.
>
> Signed-off-by: kleines Filmröllchen
> ---
>
> arch/riscv/config.mk | 10 +-
> 1 file changed, 9 insertions(+), 1 deletion(-)
>
> d
The -ffixed-gp option of GCC has an exact equivalent of -ffixed-x3 in
Clang.
Signed-off-by: kleines Filmröllchen
---
arch/riscv/config.mk | 10 +-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/riscv/config.mk b/arch/riscv/config.mk
index 9cf2aef0a4..dc4f30d673 100644
Hello everyone!
This is a minimal patchset for making U-Boot build with Clang on RISC-V,
something I stumbled upon while writing U-Boot build scripts for
SerenityOS's RISC-V port. The only change is a (for unclear reasons...)
differently-named flag for fixing the global pointer.
Notably, this p
On Fri, 19 Jan 2024 21:11:07 +0300
Maxim Kiselev wrote:
Hi Maxim,
> пт, 19 янв. 2024 г. в 20:35, Andre Przywara :
> >
> > On Tue, 16 Jan 2024 19:58:56 +0300
> > Maxim Kiselev wrote:
> >
> > Hi Maxim,
> >
> > > вт, 16 янв. 2024 г. в 03:18, Andre Przywara :
> > > >
> > > > On Thu, 15 Jun 2023
In the non-redundant code for env_sf_save(), a failure to malloc() the
temporary buffer produces the following output:
Saving Environment to SPIFlash... OK
This is misleading as the flash has neither been erased nor written.
Fix it to return an error to the caller, so the output will be:
Hi,
> Am 19.01.2024 um 17:53 schrieb Jens Maus :
>
>> Am 19.01.2024 um 17:29 schrieb Ivan T. Ivanov :
>>
>>> So you say with your own u-boot.bin you see serial U-Boot output after that
>>> „NOTICE: BL31: …“ lines? On that special UART port on the rpi5 or on the
>>> UART on the GPIO header?
>>>
The conversion to CONFIG_DM_SERIAL is mandatory, so select
this option.
Signed-off-by: Fabio Estevam
---
configs/pico-dwarf-imx6ul_defconfig | 1 +
configs/pico-hobbit-imx6ul_defconfig | 1 +
2 files changed, 2 insertions(+)
diff --git a/configs/pico-dwarf-imx6ul_defconfig
b/configs/pico-dwar
On 23:20-20240119, Apurva Nandan wrote:
> Add board files for J784S4 EVM.
>
> SYS_DISABLE_DCACHE_OPS is selected in the Kconfig because
> J784S4/AM69 are a coherent architecture at A72 level by
> MSMC support.
>
> Signed-off-by: Hari Nagalla
> [ add env and board specif
On 23:20-20240119, Apurva Nandan wrote:
[...]
> +void k3_spl_init(void)
> +{
> + struct udevice *dev;
> + int ret;
> +
> + /*
> + * Cannot delay this further as there is a chance that
> + * K3_BOOT_PARAM_TABLE_INDEX can be over writt
On 23:20-20240119, Apurva Nandan wrote:
[...]
> diff --git a/arch/arm/dts/k3-am69-sk.dts b/arch/arm/dts/k3-am69-sk.dts
> index 9868c7049b..29884097b9 100644
> --- a/arch/arm/dts/k3-am69-sk.dts
> +++ b/arch/arm/dts/k3-am69-sk.dts
I think you mis-interpreted
https://lore.kerne
On 23:20-20240119, Apurva Nandan wrote:
[...]
> diff --git a/arch/arm/dts/k3-j784s4-binman.dtsi
> b/arch/arm/dts/k3-j784s4-binman.dtsi
> new file mode 100644
> index 00..d0d49b5bbe
> --- /dev/null
> +++ b/arch/arm/dts/k3-j784s4-binman.dtsi
> @@ -0,0 +1,345
On 1/19/24 11:50 AM, Apurva Nandan wrote:
From: Dasnavis Sabiya
Add config fragments for am69_sk A72 and R5 configuration.
This applies on to:
j784s4_evm_a72_defconfig -> am69_sk_a72.config
j784s4_evm_r5_defconfig -> am69_sk_r5.config
The usage model (with the fragment) would be:
make j784s4_
Hi Andre,
пт, 19 янв. 2024 г. в 20:35, Andre Przywara :
>
> On Tue, 16 Jan 2024 19:58:56 +0300
> Maxim Kiselev wrote:
>
> Hi Maxim,
>
> > вт, 16 янв. 2024 г. в 03:18, Andre Przywara :
> > >
> > > On Thu, 15 Jun 2023 00:44:06 +0300
> > > Maxim Kiselev wrote:
> > >
> > > Hi Maxim,
> > >
> > > > Fr
+static const struct udevice_id hisi_wdt_ids[] = {
+ { .compatible = "hisilicon,wdt" },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(hisi_wdt) = {
+ .name = "hisilicon_wdt",
+ .id = UCLASS_WDT,
+ .of_match = hisi_wdt_ids,
+ .of_t
TI K3 J784S4 and AM69 are new additions to the K3 SoC family.
Add documentation about the J784S4 EVM and AM69 SK.
Signed-off-by: Dasnavis Sabiya
Signed-off-by: Apurva Nandan
---
board/ti/j784s4/MAINTAINERS | 1 +
doc/board/ti/j784s4_evm.rst | 299
doc/boar
From: Dasnavis Sabiya
Add config fragments for am69_sk A72 and R5 configuration.
This applies on to:
j784s4_evm_a72_defconfig -> am69_sk_a72.config
j784s4_evm_r5_defconfig -> am69_sk_r5.config
The usage model (with the fragment) would be:
make j784s4_evm_a72_defconfig am69_sk_a72.config
make
O
Add defconfigs for building R5 U-Boot SPL and A72 U-Boot.
Signed-off-by: Hari Nagalla
Signed-off-by: Apurva Nandan
---
board/ti/j784s4/MAINTAINERS | 2 +
configs/j784s4_evm_a72_defconfig | 158 +++
configs/j784s4_evm_r5_defconfig | 153 +++
From: Dasnavis Sabiya
Introduce the base dts files needed for u-boot or to augment the linux
dtbs for use in the u-boot-spl and u-boot binaries.
Signed-off-by: Dasnavis Sabiya
Signed-off-by: Apurva Nandan
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/k3-am69-r5-sk.dts | 1
Add env file with necessary boot variables.
Signed-off-by: Apurva Nandan
---
board/ti/j784s4/j784s4.env | 17 +
1 file changed, 17 insertions(+)
create mode 100644 board/ti/j784s4/j784s4.env
diff --git a/board/ti/j784s4/j784s4.env b/board/ti/j784s4/j784s4.env
new file mode 1006
Add board files for J784S4 EVM.
SYS_DISABLE_DCACHE_OPS is selected in the Kconfig because
J784S4/AM69 are a coherent architecture at A72 level by
MSMC support.
Signed-off-by: Hari Nagalla
[ add env and board specific yaml files for binman ]
Signed-off-by: Neha Malcom Francis
[ cleaned up the en
Add support for DMA in J784S4 SoC.
Signed-off-by: Jayesh Choudhary
Signed-off-by: Hari Nagalla
Signed-off-by: Apurva Nandan
Reviewed-by: Nishanth Menon
---
drivers/dma/ti/Makefile | 1 +
drivers/dma/ti/k3-psil-j784s4.c | 166 ++
drivers/dma/ti/k3-
Add clk and device data which can be used by respective drivers
to configure clocks and PSC.
Signed-off-by: Hari Nagalla
Signed-off-by: Apurva Nandan
Reviewed-by: Sean Anderson
Reviewed-by: Nishanth Menon
Reviewed-by: Bryan Brattlof
---
arch/arm/mach-k3/r5/j784s4/Makefile| 7 +
arch/ar
Add support for J784S4 SoC Identification.
Signed-off-by: Hari Nagalla
Signed-off-by: Apurva Nandan
Reviewed-by: Nishanth Menon
---
arch/arm/mach-k3/include/mach/hardware.h | 1 +
drivers/soc/soc_ti_k3.c | 3 +++
2 files changed, 4 insertions(+)
diff --git a/arch/arm/mach-k3/
Sort JTAG_IDs for K3 SoCs in hardware.h in alphabetical order.
Signed-off-by: Apurva Nandan
Reviewed-by: Nishanth Menon
---
arch/arm/mach-k3/include/mach/hardware.h | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-k3/include/mach/hardware.h
b/arch/arm/m
memory node is used by fdtdec_setup_mem_size_base() and
fdtdec_setup_memory_banksize() during dram_init(), so use
bootph-all to enable for all stages.
Signed-off-by: Apurva Nandan
---
arch/arm/dts/k3-am69-sk.dts| 1 +
arch/arm/dts/k3-j784s4-evm.dts | 1 +
2 files changed, 2 insertions(+)
di
Add J784S4 initialization files for initial SPL boot.
config SYS_K3_MCU_SCRATCHPAD_BASE default value is same
for J721E, J721S2, J784S4. So combined them into a single
default.
Signed-off-by: Hari Nagalla
[ add firewall configurations and change the R5 MCU scratchpad ]
Signed-off-by: Manorit Cha
Sort SOC_K3 config entries in alphabetical order
for clean up.
Signed-off-by: Apurva Nandan
---
arch/arm/mach-k3/Kconfig | 18 +-
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig
index 03898424c9..f0ed5c6128 100644
Hello Everyone!
This series will introduce basic support (SD and UART) support for Texas
Instruments J784S4 EVM.
The J784S4 SoC device tree patches are taken from kernel patch submissions
and will be updated as they are accepted and merged to the kernel tree.
All other patches are specific to SPL
On Tue, 16 Jan 2024 19:58:56 +0300
Maxim Kiselev wrote:
Hi Maxim,
> вт, 16 янв. 2024 г. в 03:18, Andre Przywara :
> >
> > On Thu, 15 Jun 2023 00:44:06 +0300
> > Maxim Kiselev wrote:
> >
> > Hi Maxim,
> >
> > > From: Maksim Kiselev
> > >
> > > Based on dt-specs fixed-link doesn't require phy-
Commit 68dcbdd594d4 ("ARM: imx: Add weak default reset_cpu()") caused
the 'reset' command in U-Boot to not cause a board reset.
Fix it by switching to the watchdog driver model via sysreset, which
is the preferred method for implementing the watchdog reset.
Signed-off-by: Fabio Estevam
---
On Fri, Jan 19, 2024 at 05:59:07PM +0100, Patrice CHOTARD wrote:
> Hi Tom
>
> Please pull the STM32 related patches for u-boot/master, v2024.04:
> u-boot-stm32-20240119
>
> CI status:
> https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/19379
>
>
On Thu, Jan 18, 2024 at 07:10:47PM +0100, max.oss...@gmail.com wrote:
> From: Max Krummenacher
>
> These headers follow the pattern:
>
> | #if CONFIG_IS_ENABLED(FANCY_FEATURE)
> | void foo(void);
> | #else
> | static inline void foo(void) { return -ENOSYS; }
> | #endif
>
> In the #else pat
Hi Tom
Please pull the STM32 related patches for u-boot/master, v2024.04:
u-boot-stm32-20240119
CI status: https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/19379
The following changes since commit f7cca7ccc5117eaafcc2bde91ad1bed6fee7cfc3:
Revert "test: hush: dollar
> Am 19.01.2024 um 17:29 schrieb Ivan T. Ivanov :
>
>> So you say with your own u-boot.bin you see serial U-Boot output after that
>> „NOTICE: BL31: …“ lines? On that special UART port on the rpi5 or on the
>> UART on the GPIO header?
>>
>
> Yes :-) See attached log file.
Really strange tha
On 01-19 17:12, Jens Maus wrote:
> >>
> >> On the HDMI port, right? But what about the serial UART output?
> >
> > Yes, I can see serial output from U-Boot. I am using one of these
> > simple USB<->UART cables. You can see serial output when you boot
> > with RPiOS, when you use "Raspberry Pi De
> Am 19.01.2024 um 15:24 schrieb Ivan T. Ivanov :
>
>> On 19 Jan 2024, at 16:08, Jens Maus wrote:
>>
>> On the HDMI port, right? But what about the serial UART output?
>
> Yes, I can see serial output from U-Boot. I am using one of these
> simple USB<->UART cables. You can see serial output
On Tue, Jan 09, 2024 at 05:57:16PM -0500, Tom Rini wrote:
> The function getchar() returns an 'int' and not a 'char'. Coverity notes
> that "Assigning the return value of getchar to char ... truncates its value."
> and so for the most part we can resolve this easily by using 'int' as
> intended, a
On Thu, Jan 11, 2024 at 12:58:19PM +, Ivan Orlov wrote:
> 'License' command processing code could be successfully compiled only
> when CONFIG_GZIP option is enabled, otherwise it can't find the 'gunzip'
> function definition (it is defined in lib/gunzip.c).
>
> Add CONFIG_GZIP dependency to '
On Mon, Jan 08, 2024 at 05:20:45PM +, Ivan Orlov wrote:
> Fix a typo: add a space after the single quote in 'illegal character'
> error message in 'env set' command
>
> Signed-off-by: Ivan Orlov
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Mon, Jan 08, 2024 at 03:24:30PM +0100, Hugo Cornelis wrote:
> This patch adds a function fit_image_read_key_iv_data that checks the
> return value of snprintf and allows to generate a sensible error
> message when generating binary images using filenames that are too
> long for the OS to handle
On Wed, Jan 10, 2024 at 04:59:02AM +, Moritz Fischer wrote:
> This enables 64b BARs if CONFIG_SYS_PCI_64BIT is enabled.
>
> Reviewed-by: Philip Oberfichtner
> Reviewed-by: Simon Glass
> Signed-off-by: Moritz Fischer
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: P
On Wed, Jan 10, 2024 at 05:04:48AM +, Moritz Fischer wrote:
> A busy controller shouldn't be game-over for all controllers,
> so keep trying on hitting -EBUSY.
>
> This change brings the actual behavior of the routine in line
> with what the descriptions says.
>
> Fixes: 982388eaa991 ("nvme:
On Wed, Jan 10, 2024 at 05:04:47AM +, Moritz Fischer wrote:
> Return -EBUSY if controller is found busy rather than -ENOMEM
> and update the error message accordingly.
>
> Fixes: 982388eaa991 ("nvme: Add NVM Express driver support")
> Reviewed-by: Simon Glass
> Signed-off-by: Moritz Fischer
On Thu, Jan 04, 2024 at 05:12:22PM +, Caleb Connolly wrote:
> When attempting to probe a device which has an associated IOMMU, if the
> IOMMU device can't be found (no driver, disabled driver, driver failed
> to probe, etc) then we currently fail to probe the device with no
> discernable error
On Fri, Jan 05, 2024 at 03:08:04PM +0100, Csókás Bence wrote:
> But emit a warning for it. Then we can remove support when
> everyone had time to update their scripts, docs, CI etc.
>
> Fixes: ece85cc020 rsa: use pkcs11 uri as defined in rfc7512
>
> Signed-off-by: Csókás Bence
Applied to u-boo
On Fri, Jan 05, 2024 at 03:08:03PM +0100, Csókás Bence wrote:
> If `keydir` is not present, we need to build a PKCS11 URI
> from just the key name. In this case, we *do* need 'pkcs11:'
>
> Fixes: ece85cc020 rsa: use pkcs11 uri as defined in rfc7512
>
> Signed-off-by: Csókás Bence
Applied to u-
On Mon, Jan 08, 2024 at 10:11:00PM +0100, Tobias Deiminger wrote:
> 42c0e5bb054d ("test: Find leftovers after clean/mrproper") assumes out
> of tree builds. test_clean and test_mrproper fail if the assumption
> isn't met.
>
> However there are valid scenarios where tests run with in source builds
On Tue, Jan 09, 2024 at 02:39:57PM +0530, Love Kumar wrote:
> Add test cases for bootstage command to print the bootstage report, to
> stash the data into memory and to unstash the data from memory.
>
> Signed-off-by: Love Kumar
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Descrip
On Thu, Jan 11, 2024 at 05:51:27PM +0100, Anthony Loiseau wrote:
> From: Anthony Loiseau
>
> Penguin chiefs are actually stripped out from get_maintainer results unless
> --git-chief-penguins is provided, which appends them to all results instead.
>
> This is a issue for U-Boot since Tom Rini (
On Thu, Jan 11, 2024 at 04:39:36PM +0200, Ilias Apalodimas wrote:
> commit 738b34668f28 ("smbios: Fallback to the default DT if sysinfo nodes are
> missing")
> allowed the code to fallback and fill in SMBIOS tables with properties
> from the compatible and product nodes of the DT, in case the
> '
On Thu, Jan 11, 2024 at 04:39:35PM +0200, Ilias Apalodimas wrote:
> sysinfo_str is a bit too long and makes indentation weird. Shorten it
> to si_str.
>
> Signed-off-by: Ilias Apalodimas
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Thu, Jan 11, 2024 at 07:34:08AM +0100, Heinrich Schuchardt wrote:
> A SMBIOS 3 entry point has a different length than an SMBIOS 2.1 entry
> point.
>
> Fixes: 70924294f375 ("smbios: Use SMBIOS 3.0 to support an address above 4GB")
> Fixes: 1c5f6fa3883d ("smbios: Drop support for SMBIOS2 tables
On Tue, Jan 09, 2024 at 02:15:51PM +0530, Sekhar Nori wrote:
> Entry for physical address 0x5 in memory map table for MMU
> configuration is spilling over and inadvertently making DDR available at
> higher address (above 4GB address space) get mapped as device memory
> (nGnRnE).
>
> Fix t
On Mon, Jan 08, 2024 at 03:16:50PM +0200, Roger Quadros wrote:
> The TMDS64EVM [1] ships with AM64X SR2.0 HS-FS chip
> and a slightly different board name in the board information
> EEPROM header. Support this board.
>
> [1] https://www.ti.com/tool/TMDS64EVM
>
> Gets rid of below message at boot
On Mon, Jan 08, 2024 at 01:48:49PM +0530, Manorit Chawdhry wrote:
> By default this variable is unset and this causes the test condition to
> fail on devices that don't have this defined. Set a default value for
> this.
>
>=> boot
>## Error: "main_cpsw0_qsgmii_phyinit" not defined
>[.
On Mon, Jan 08, 2024 at 01:48:48PM +0530, Manorit Chawdhry wrote:
> Fix a missing semicolon that leads to syntax error while booting j721s2.
>
> Importing environment from mmc1 ...
> syntax error at 'run'HUSH died!
>
> Fixes: 0d72b0f2f83b ("include: env: ti: ti_common: Run
> main_cpsw0_
The CONFIG_SPL_BOARD_INIT lets SPL common code call spl_board_init()
during the SPL start up. On this particular system, spl_board_init()
is used to reconfigure GIC clock parent to PLL2 500M, which is the
configuration expected by the Linux kernel. Enable SPL_BOARD_INIT
and fill in the GIC clock co
On Fri, Jan 05, 2024 at 05:09:16PM +0530, Neha Malcom Francis wrote:
> Clean up all configuration files to adhere to yamllint rules.
>
> Signed-off-by: Neha Malcom Francis
> Suggested-by: Nishanth Menon
After fixing more yamllint problems on newly merged platforms,
Applied to u-boot/master, th
On Fri, Jan 05, 2024 at 05:09:17PM +0530, Neha Malcom Francis wrote:
> Use yamllint for checking whether YAML configuration files are adhering
> to default yamllint rules.
>
> Signed-off-by: Neha Malcom Francis
> Suggested-by: Nishanth Menon
Applied to u-boot/master, thanks!
--
Tom
signatu
On Thu, Jan 11, 2024 at 09:14:33AM +0100, Heinrich Schuchardt wrote:
> Checking argc < 3 twice is redundant.
>
> Addresses-Coverity-ID: 477198 Logically dead code
> Fixes: 921f63e57238 ("bootflow: Allow setting a cmdline arg with no value")
> Signed-off-by: Heinrich Schuchardt
Applied to u-boot
On Sun, Jan 07, 2024 at 10:01:07AM +0100, Heinrich Schuchardt wrote:
> ret is assigned a value 0 which is never used but
> is immediately overwritten in the next statement.
>
> Addresses-Coverity-ID: 453304 ("Unused value")
> Signed-off-by: Heinrich Schuchardt
Applied to u-boot/master, thanks!
On Sun, Jan 07, 2024 at 09:43:40AM +0100, Heinrich Schuchardt wrote:
> The 'return 0;' statement is not reachable. Remove it.
> 'else' is superfluous after an if statement with return.
>
> Addresses-Coverity-ID: 352451 ("Logically dead code")
> Signed-off-by: Heinrich Schuchardt
Applied to u-bo
On Thu, Jan 04, 2024 at 04:03:35PM +, Caleb Connolly wrote:
> Sometimes, when only one bootdev is available, and it fails to probe, we
> end up in an infinite loop calling probe() on the same device over and
> over. With only debug level log output.
>
> Break the loop if we fail to probe the
The CONFIG_SPL_BOARD_INIT lets SPL common code call spl_board_init()
during the SPL start up. On this particular system, spl_board_init()
is used to reconfigure GIC clock parent to PLL2 500M, which is the
configuration expected by the Linux kernel. Enable SPL_BOARD_INIT .
Set GIC clock to 500 MHz
behavior" (2024-01-18 11:38:25 -0500)
>
> are available in the Git repository at:
>
> https://source.denx.de/u-boot/custodians/u-boot-rockchip.git
> tags/u-boot-rockchip-20240119
>
> for you to fetch changes up to c16c7ac2fe69f3cebbfc921c5b023dccc12cd198:
>
>
On 16:05-20240110, Sumit Garg wrote:
[...]
> Prerequisite
>
>
> This patch series requires devicetree-rebasing git repo to be added as a
> subtree to the main U-Boot repo via:
>
> $ git subtree add --prefix dts/upstream \
>
> git://git.kernel.org/pub/scm/linux/kernel/git/devic
Hi Heinrich,
On Tue, 2024-01-16 at 17:14 +0100, Heinrich Schuchardt wrote:
> On 16.01.24 14:45, Heinrich Schuchardt wrote:
> > On 16.01.24 13:36, Mayuresh Chitale wrote:
> > > If a disk has an EFI system partition (ESP) then it can be used
> > > to
> > > locate the boot files. Add a function to fi
Save boot arguments x[0-3] into an array for handover of bloblist from
previous boot stage.
Signed-off-by: Raymond Mao
---
Changes in v2
- New patch file created for v2.
Changes in V5
- Drop the dependence on OF_BOARD.
Changes in V7
- Exclude the saved_args when BLOBLIST is disabled.
arch/arm/c
This patch set adds/adapts a few bloblist APIs and implements Arm arch
custom function to retrieve the bloblist (aka. Transfer List) from
previous loader via boot arguments when BLOBLIST option is enabled and
all boot arguments are compliant to the register conventions defined
in the Firmware Hando
When BLOBLIST is enabled, FDT is expected to be from bloblist
carried from previous stage, instead of from OF_BOARD, therefore
only enable OF_HAS_PRIOR_STAGE when BLOBLIST is disabled.
Signed-off-by: Raymond Mao
---
Changes in V7
- Initial patch .
dts/Kconfig | 1 +
1 file changed, 1 insertion(
During bloblist initialization, load the bloblist via boot arguments
from the previous loader.
If a valid bloblist exists in boot arguments, relocate it into the
fixed bloblist memory region.
If not, fallback to support BLOBLIST_ADDR or BLOBLIST_ALLOC.
Signed-off-by: Raymond Mao
---
Changes in v4
Add arch custom function to get bloblist from boot arguments.
Check whether boot arguments aligns with the register conventions
defined in FW Handoff spec v0.9.
Signed-off-by: Raymond Mao
---
Changes in v2
- Remove low level code for copying boot arguments.
- Refactor board_fdt_blob_setup() and r
Save boot arguments x[0-3] into an array for handover of bloblist from
previous boot stage.
Signed-off-by: Raymond Mao
---
Changes in v2
- New patch file created for v2.
Changes in V5
- Drop the dependence on OF_BOARD.
Changes in V7
- Exclude the saved_args when BLOBLIST is disabled.
arch/arm/c
Save boot arguments r[0-3] into an array for handover of bloblist from
previous boot stage.
Signed-off-by: Raymond Mao
---
Changes in v2
- New patch file created for v2.
Changes in v3
- Swap value of r0 with r2.
Changes in v4
- Fix a bug when saving the boot args.
Changes in V5
- Drop the depende
The current bloblist pointer and size can be retrieved from global
data, so we don't need to pass them from the function arguments.
This change also help to remove all external access of gd->bloblist
outside of bloblist module.
Signed-off-by: Raymond Mao
Reviewed-by: Ilias Apalodimas
---
Changes
Instead of expecting the bloblist total size to be the same as the
pre-allocated buffer size, practically we are more interested in
whether the pre-allocated buffer size is bigger than the bloblist
total size.
Signed-off-by: Raymond Mao
Reviewed-by: Ilias Apalodimas
---
Changes in v2
- New patch
Add bloblist_check_reg_conv() to check whether the bloblist is compliant
to the register conventions defined in Firmware Handoff specification.
This API can be used for all Arm platforms.
Signed-off-by: Raymond Mao
---
Changes in v2
- Refactor of bloblist_check_reg_conv().
Changes in v3
- bloblis
This patch set adds/adapts a few bloblist APIs and implements Arm arch
custom function to retrieve the bloblist (aka. Transfer List) from
previous loader via boot arguments when BLOBLIST option is enabled and
all boot arguments are compliant to the register conventions defined
in the Firmware Hando
On 1/19/24 15:45, Patrick DELAUNAY wrote:
> Hi
>
> On 1/9/24 15:00, Patrice Chotard wrote:
>> "#if" was used instead of "#ifdef"
>>
>> Fixes: 01a701994b05 ("stm32mp2: initial support")
>> Signed-off-by: Patrice Chotard
>> ---
>>
>> arch/arm/mach-stm32mp/include/mach/stm32.h | 2 +-
>> 1 fil
Hi
On 1/9/24 15:00, Patrice Chotard wrote:
"#if" was used instead of "#ifdef"
Fixes: 01a701994b05 ("stm32mp2: initial support")
Signed-off-by: Patrice Chotard
---
arch/arm/mach-stm32mp/include/mach/stm32.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-st
On 07:20-20240110, Bryan Brattlof wrote:
> On January 10, 2024 thus sayeth Bhavya Kapoor:
> >
> > On 08/01/24 7:35 pm, Bryan Brattlof wrote:
> > > Hi Bhavya!
> > >
> > > On January 8, 2024 thus sayeth Bhavya Kapoor:
> > > > This Series adds Itap Delay Value for DDR52 speed mode for eMMC in
> > >
Add a following test cases for scsi commands:
scsi_reset - To reset SCSI controller
scsi_info - To show available SCSI devices
scsi_scan - To (re-)scan SCSI bus
scsi_device - To show or set surrent device
scsi_part - To print partition table of selected SCSI device
Signed-off-by: Love Kumar
---
Add test cases for sf commands to verify various SPI flash operations
such as erase, write and read. It also adds qspi lock unlock cases.
This test relies on boardenv_* configurations to run it for different
SPI flash family such as single SPI, QSPI, and OSPI.
Signed-off-by: Love Kumar
---
test/
Add tests for nand commands to test various NAND flash operations such
as erase, write and read.
Signed-off-by: Love Kumar
---
test/py/tests/test_nand.py | 201 +
1 file changed, 201 insertions(+)
create mode 100644 test/py/tests/test_nand.py
diff --git a/te
Add the test cases for usb commands to test its various functionality
such as start, stop, reset, info, tree, storage, dev, part, ls, load,
and save. It also adds different file systems cases such as fat32, ext2
and ext4.
Signed-off-by: Love Kumar
---
test/py/tests/test_usb.py | 626
Add the test cases for mmc commands to test its various functionality
such as mmc list, dev, info, rescan, part, ls, load, and save. It also
adds different file systems cases such as fat32, ext2 and ext4.
Signed-off-by: Love Kumar
---
test/py/tests/test_mmc.py | 671 +
> On 19 Jan 2024, at 16:08, Jens Maus wrote:
>
>
>> Am 19.01.2024 um 15:06 schrieb Ivan T. Ivanov :
>>
>> On 01-19 14:54, Jens Maus wrote:
>>>
Am 19.01.2024 um 14:46 schrieb Ivan T. Ivanov :
Same here, expect that they are more memory banks, of course.
It is really stra
> Am 19.01.2024 um 15:06 schrieb Ivan T. Ivanov :
>
> On 01-19 14:54, Jens Maus wrote:
>>
>>> Am 19.01.2024 um 14:46 schrieb Ivan T. Ivanov :
>>>
>>> Same here, expect that they are more memory banks, of course.
>>> It is really strange that you don't seen even single message
>>> from the U-Bo
On 1/16/24 08:19, Patrice CHOTARD wrote:
> Hi Marek
>
> On 1/13/24 18:57, Marek Vasut wrote:
>> In case CONSOLE_MUX and SYS_CONSOLE_IS_IN_ENV are enabled, the console
>> stdin, stdout, stderr must be defined in environment. Define the default
>> settings to fix the following warning on boot:
>>
Hi,
On 01-19 14:54, Jens Maus wrote:
>
> > Am 19.01.2024 um 14:46 schrieb Ivan T. Ivanov :
> >
> > Same here, expect that they are more memory banks, of course.
> > It is really strange that you don't seen even single message
> > from the U-Boot..
>
> Indeed. Not a single line, nor any U-Boot l
> Am 19.01.2024 um 14:46 schrieb Ivan T. Ivanov :
>
> Same here, expect that they are more memory banks, of course.
> It is really strange that you don't seen even single message
> from the U-Boot..
Indeed. Not a single line, nor any U-Boot logo or anything on HDMI. Do you see
any debug output
On 18/01/2024 21:54, Ramon Fried wrote:
> On Tue, Dec 19, 2023 at 6:04 PM Caleb Connolly
> wrote:
>>
>> Introduce support for early debugging.
>>
>> Signed-off-by: Caleb Connolly
>> ---
>> drivers/serial/Kconfig | 8
>> drivers/serial/serial_msm.c | 32 +
+ u-boot@lists.denx.de
I am not sure how I drop the list in my last email, sorry.
On 01-19 12:56, Jens Maus wrote:
> Hi Ivan,
>
> > Am 19.01.2024 um 12:22 schrieb Ivan T. Ivanov :
> >
> > On 01-19 11:49, Jens Maus wrote:
> >>> Am 19.01.2024 um 10:20 schrieb Stefan Wahren :
> >>>
> >>> Another
From: Yang Xiwen
Hi3798 Series SoCs have a CRG (Clock Reset Generator) module which
manages all clocks and resets of the SoC.
The first supported chip is Hi3798MV200. The unused clocks are not
registered to save space and time. Only necessary clocks are
implemented right now.
Signed-off-by: Ya
| 55 +
include/dt-bindings/clock/histb-clock.h | 4 +
include/linux/clk-provider.h| 6 +
9 files changed, 410 insertions(+)
---
base-commit: f7cca7ccc5117eaafcc2bde91ad1bed6fee7cfc3
change-id: 20240119-b4-hisi-clk-88075b46c359
Best regards,
--
Yang Xiwen
From: Yang Xiwen
This function is used by HiSilicon Clock Framework.
Signed-off-by: Yang Xiwen
---
include/linux/clk-provider.h | 6 ++
1 file changed, 6 insertions(+)
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index b8acacd49e..952439ad39 100644
--- a/includ
From: Yang Xiwen
Hi3798 Series SoCs have a CRG (Clock Reset Generator) module which
manages all clocks and resets of the SoC.
The first supported chip is Hi3798MV200. The unused clocks are not
registered to save space and time. Only necessary clocks are
implemented right now.
Signed-off-by: Ya
| 55 +
include/dt-bindings/clock/histb-clock.h | 4 +
include/linux/clk-provider.h| 6 +
9 files changed, 410 insertions(+)
---
base-commit: f7cca7ccc5117eaafcc2bde91ad1bed6fee7cfc3
change-id: 20240119-b4-hisi-clk-88075b46c359
Best regards,
--
Yang Xiwen
From: Yang Xiwen
This function is used by HiSilicon Clock Framework.
Signed-off-by: Yang Xiwen
---
include/linux/clk-provider.h | 6 ++
1 file changed, 6 insertions(+)
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index b8acacd49e..952439ad39 100644
--- a/includ
1 - 100 of 131 matches
Mail list logo
