Linux 6.6.y with KASLR enabled would print the following message on boot: " KASLR disabled due to lack of seed " Enable the 'kaslrseed' command so a random number seed can be pulled from CAAM and inserted into the /chosen node 'kaslr-seed' property of Linux kernel DT before boot, thus letting KASLR work properly.
Signed-off-by: Marek Vasut <ma...@denx.de> --- Cc: Fabio Estevam <feste...@denx.de> Cc: Stefano Babic <sba...@denx.de> Cc: u-b...@dh-electronics.com --- configs/imx8mp_dhcom_pdk2_defconfig | 2 ++ configs/imx8mp_dhcom_pdk3_defconfig | 2 ++ 2 files changed, 4 insertions(+) diff --git a/configs/imx8mp_dhcom_pdk2_defconfig b/configs/imx8mp_dhcom_pdk2_defconfig index 4f907ce00d0..23fb6272ad5 100644 --- a/configs/imx8mp_dhcom_pdk2_defconfig +++ b/configs/imx8mp_dhcom_pdk2_defconfig @@ -117,6 +117,7 @@ CONFIG_CMD_BOOTCOUNT=y CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y CONFIG_CMD_GETTIME=y +CONFIG_CMD_KASLRSEED=y CONFIG_CMD_SYSBOOT=y CONFIG_CMD_UUID=y CONFIG_CMD_PMIC=y @@ -223,6 +224,7 @@ CONFIG_DM_REGULATOR_PCA9450=y CONFIG_SPL_DM_REGULATOR_PCA9450=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_RNG=y CONFIG_DM_RTC=y CONFIG_RTC_M41T62=y CONFIG_CONS_INDEX=2 diff --git a/configs/imx8mp_dhcom_pdk3_defconfig b/configs/imx8mp_dhcom_pdk3_defconfig index 9972e2d96b6..0d47c12b1f9 100644 --- a/configs/imx8mp_dhcom_pdk3_defconfig +++ b/configs/imx8mp_dhcom_pdk3_defconfig @@ -119,6 +119,7 @@ CONFIG_CMD_BOOTCOUNT=y CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y CONFIG_CMD_GETTIME=y +CONFIG_CMD_KASLRSEED=y CONFIG_CMD_SYSBOOT=y CONFIG_CMD_UUID=y CONFIG_CMD_PMIC=y @@ -228,6 +229,7 @@ CONFIG_DM_REGULATOR_PCA9450=y CONFIG_SPL_DM_REGULATOR_PCA9450=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_RNG=y CONFIG_DM_RTC=y CONFIG_RTC_M41T62=y CONFIG_CONS_INDEX=2 -- 2.43.0
