There is no need to set the ARCH variable when building U-Boot. In fact,
the ARCH name in U-Boot is 'arm'.
Signed-off-by: Baruch Siach
---
board/freescale/imx8mq_evk/README | 1 -
1 file changed, 1 deletion(-)
diff --git a/board/freescale/imx8mq_evk/README
b/board/freescale/imx8mq_evk/README
i
Use a single '=' to test string equality for compatibility with non-bash
shells. Otherwise, if /bin/sh is dash, build fails:
./tools/imx8m_image.sh: 15: [: signed_hdmi_imx8m.bin: unexpected operator
./tools/imx8m_image.sh: 15: [: signed_hdmi_imx8m.bin: unexpected operator
./tools/imx8m_image.sh: 1
Hi Lukas
> > From: Lukas Auer [mailto:lukas.a...@aisec.fraunhofer.de]
> > Sent: Monday, December 31, 2018 2:28 AM
> > To: u-boot@lists.denx.de
> > Cc: Anup Patel; Lukas Auer; Rick Jian-Zhi Chen(陳建志); Bin Meng; Greentime Hu
> > Subject: [PATCH 2/6] riscv: remove invalid dcache flush implementation
On 1/2/19 12:37 AM, Lukasz Majewski wrote:
> This patch is a preparation for the imx6q to use DTS in the SPL for very
> early configuration, as 'u-boot,dm-pre-reloc;' is necessary to initialize
> uart and SD/eMMC controllers in SPL.
>
> Signed-off-by: Lukasz Majewski
Should be in U-Boot specific
On 1/2/19 12:37 AM, Lukasz Majewski wrote:
> This patch is necessary to initialize some board/soc specific clocks -
> like anatop, which is used to clock PHY and FEC block itself.
>
> The initialization is performed with device tree by introducing two new
> properties - namely;
> 'fsl,enet-loopbac
On 1/2/19 12:37 AM, Lukasz Majewski wrote:
> This patch provides a generic way to setup ENET (ETH) clocks for imx6(q)
> based boards. Previously this was performed per board in the
> board_eth_init() function.
>
> Signed-off-by: Lukasz Majewski
> ---
>
> arch/arm/include/asm/arch-mx6/clock.h |
On 1/2/19 12:37 AM, Lukasz Majewski wrote:
> The DM_FLAG_PRE_RELOC shall be enabled as this driver is going to be
> re-used in the i.MX based SoCs.
>
> It is crucial to have running the serial console before relocation.
But the patch doesn't do what the subject/commit message claims is does.
If I
On 1/2/19 12:37 AM, Lukasz Majewski wrote:
> This commit defines the TPC70 imx6q board with device tree description.
>
> Signed-off-by: Lukasz Majewski
Is this pulled from Linux ?
--
Best regards,
Marek Vasut
___
U-Boot mailing list
U-Boot@lists.denx
On 1/2/19 12:37 AM, Lukasz Majewski wrote:
> With the current code, it is not possible to assign different than default
> numbers for mmc controllers.
>
> Several in-tree boards depend on the pre-dm setup, corresponding to
> following aliases:
>
> mmc0 = &usdhc2; --> fsl,usdhc-index = <1>
> mmc1
On 1/2/19 12:37 AM, Lukasz Majewski wrote:
> This commit is necessary to be able to re-use the pinctrl code in early
> SPL to properly configure pins.
>
> The problem is that those "static" structures are placed in the SDRAM
> area, which corresponds to u-boot proper (not even SPL). Hence, when
>
On 1/2/19 12:37 AM, Lukasz Majewski wrote:
> This is a cosmetic change, just to use proper define.
>
> Signed-off-by: Lukasz Majewski
The subject tags are wrong, fix globally.
> ---
>
> board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff -
On 1/2/19 12:37 AM, Lukasz Majewski wrote:
> This commit fixes warnings produced by newest in u-boot DTC compiler:
> 'unnecessary #address-cells/#size-cells without "ranges" or child "reg"
> property'
>
> Signed-off-by: Lukasz Majewski
I presume the DTSIs are taken from Linux, is this a backpor
On 1/2/19 12:37 AM, Lukasz Majewski wrote:
> The TPC70 can boot from eMMC's boot0. This patch allows it to update
> this HW partition's SPL.
>
> Signed-off-by: Lukasz Majewski
> ---
>
> include/configs/kp_imx6q_tpc.h | 5 +
> 1 file changed, 5 insertions(+)
>
> diff --git a/include/configs
On 1/2/19 12:37 AM, Lukasz Majewski wrote:
> Signed-off-by: Lukasz Majewski
The tags should be ARM: imx: ...
The commit message is missing.
> ---
>
> include/configs/kp_imx6q_tpc.h | 21 +
> 1 file changed, 21 insertions(+)
>
> diff --git a/include/configs/kp_imx6q_tpc.h
On Wed, Jan 02, 2019 at 12:52:05AM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this as part of v2019.01 release.
>
> thanks,
> Jagan.
>
> The following changes since commit bea3d826203f90507ff32ed24bd0a3c53479e55c:
>
> Merge tag 'signed-efi-2019.01' of git://github.com/agraf/u-boot (2
h 'master' of git://git.denx.de/u-boot-i2c (2018-12-13
> 09:36:55 -0500)
>
> are available in the Git repository at:
>
> git://www.denx.de/git/u-boot-imx.git tags/u-boot-imx-20190101
>
> for you to fetch changes up to 57d2beb91d705bccdfee5e9e5fd267f5e363a100:
&g
This patch is a preparation for the imx6q to use DTS in the SPL for very
early configuration, as 'u-boot,dm-pre-reloc;' is necessary to initialize
uart and SD/eMMC controllers in SPL.
Signed-off-by: Lukasz Majewski
---
arch/arm/dts/imx6qdl.dtsi | 5 +
1 file changed, 5 insertions(+)
diff -
This patch is necessary to initialize some board/soc specific clocks -
like anatop, which is used to clock PHY and FEC block itself.
The initialization is performed with device tree by introducing two new
properties - namely;
'fsl,enet-loopback-clk' and 'fsl,enet-freq' which specify the need to
se
The DM_FLAG_PRE_RELOC shall be enabled as this driver is going to be
re-used in the i.MX based SoCs.
It is crucial to have running the serial console before relocation.
Signed-off-by: Lukasz Majewski
---
drivers/serial/serial_mxc.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/s
This commit defines the TPC70 imx6q board with device tree description.
Signed-off-by: Lukasz Majewski
---
arch/arm/dts/imx6q-kp.dts | 227 ++
1 file changed, 227 insertions(+)
create mode 100644 arch/arm/dts/imx6q-kp.dts
diff --git a/arch/arm/dts/i
This commit moves the TPC70 to use device model and device tree description
in both SPL and u-boot proper.
Signed-off-by: Lukasz Majewski
---
arch/arm/mach-imx/mx6/Kconfig | 10 ++
board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c | 174 --
board/k+p/kp_imx6q_t
This patch provides a generic way to setup ENET (ETH) clocks for imx6(q)
based boards. Previously this was performed per board in the
board_eth_init() function.
Signed-off-by: Lukasz Majewski
---
arch/arm/include/asm/arch-mx6/clock.h | 1 +
arch/arm/mach-imx/mx6/clock.c | 17 ++
This commit fixes warnings produced by newest in u-boot DTC compiler:
'unnecessary #address-cells/#size-cells without "ranges" or child "reg"
property'
Signed-off-by: Lukasz Majewski
---
arch/arm/dts/imx6q.dtsi | 4
arch/arm/dts/imx6qdl.dtsi | 9 -
2 files changed, 13 deletions(
This is a cosmetic change, just to use proper define.
Signed-off-by: Lukasz Majewski
---
board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c
b/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c
index ace986fa05..b
With the current code, it is not possible to assign different than default
numbers for mmc controllers.
Several in-tree boards depend on the pre-dm setup, corresponding to
following aliases:
mmc0 = &usdhc2; --> fsl,usdhc-index = <1>
mmc1 = &usdhc4; --> fsl,usdhc-index = <3>
Without this patch we
Signed-off-by: Lukasz Majewski
---
board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c | 4
1 file changed, 4 insertions(+)
diff --git a/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c
b/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c
index bcc22b1aa8..f0c97ba368 100644
--- a/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c
+++ b/bo
This patch series converts imx6q based tpc70 board to use driver model and
device tree description in SPL and u-boot proper.
All the non-DM parts of the code has been removed.
This patch series also has several early DM issues fixed for imx6q - for
example the pinctrl static definitions.
Also, t
This commit is necessary to be able to re-use the pinctrl code in early
SPL to properly configure pins.
The problem is that those "static" structures are placed in the SDRAM
area, which corresponds to u-boot proper (not even SPL). Hence, when
one wants to configure pins before relocation via DTS/D
The TPC70 can boot from SD card (debug/development) and eMMC (production).
The board_boot_order() function provides a run time check for the device
from which one wants to boot (it is selected by GPIO pins setup).
Moreover, a fallback to SD card is provided if the detection is not
possible or work
The TPC70 can boot from eMMC's boot0. This patch allows it to update
this HW partition's SPL.
Signed-off-by: Lukasz Majewski
---
include/configs/kp_imx6q_tpc.h | 5 +
1 file changed, 5 insertions(+)
diff --git a/include/configs/kp_imx6q_tpc.h b/include/configs/kp_imx6q_tpc.h
index ee9c56bc
Signed-off-by: Lukasz Majewski
---
include/configs/kp_imx6q_tpc.h | 21 +
1 file changed, 21 insertions(+)
diff --git a/include/configs/kp_imx6q_tpc.h b/include/configs/kp_imx6q_tpc.h
index b6b27ee1d5..ee9c56bc21 100644
--- a/include/configs/kp_imx6q_tpc.h
+++ b/include/conf
On 1/1/19 3:52 AM, Chee, Tien Fong wrote:
> On Sun, 2018-12-30 at 16:44 +0100, Marek Vasut wrote:
>> On 12/30/18 9:13 AM, tien.fong.c...@intel.com wrote:
>>>
>>> From: Tien Fong Chee
>>>
>>> These series of patches enable peripheral bitstream being
>>> programmed into FPGA
>>> to get the DDR up ru
On 1/1/19 4:39 AM, Chee, Tien Fong wrote:
> On Sun, 2018-12-30 at 16:51 +0100, Marek Vasut wrote:
>> On 12/30/18 9:13 AM, tien.fong.c...@intel.com wrote:
>>>
>>> From: Tien Fong Chee
>>>
>>> Add support for loading FPGA bitstream to get DDR up running before
>>> U-Boot is loaded into DDR. Boot dev
On 1/1/19 4:32 AM, Chee, Tien Fong wrote:
> On Sun, 2018-12-30 at 16:47 +0100, Marek Vasut wrote:
>> On 12/30/18 9:13 AM, tien.fong.c...@intel.com wrote:
>>>
>>> From: Tien Fong Chee
>>>
>>> Update the default configuration file to enable the necessary
>>> functionality
>>> to get the SoCFPGA load
On 1/1/19 4:51 AM, Chee, Tien Fong wrote:
> On Sun, 2018-12-30 at 16:54 +0100, Marek Vasut wrote:
>> On 12/30/18 9:13 AM, tien.fong.c...@intel.com wrote:
>>>
>>> From: Marek Vasut
>>>
>>> Update the default configuration file to enable the necessary
>>> functionality
>>> the get the kit working. T
On 1/1/19 4:10 AM, Chee, Tien Fong wrote:
> On Sun, 2018-12-30 at 16:46 +0100, Marek Vasut wrote:
>> On 12/30/18 9:13 AM, tien.fong.c...@intel.com wrote:
>>>
>>> From: Tien Fong Chee
>>>
>>> This patch adds description on properties about file name used for
>>> both
>>> peripheral bitstream and co
On 1/1/19 4:28 AM, Chee, Tien Fong wrote:
> On Sun, 2018-12-30 at 16:45 +0100, Marek Vasut wrote:
>> On 12/30/18 9:13 AM, tien.fong.c...@intel.com wrote:
>>>
>>> From: Tien Fong Chee
>>>
>>> Add FPGA driver to support program FPGA with FPGA bitstream loading
>>> from
>>> filesystem. The driver are
On 1/1/19 7:45 PM, Álvaro Fernández Rojas wrote:
> - Fixes CONFIG_OF_EMBED warning.
> - Fixes missing CONFIG_BLK warning for CONFIG_USB.
More details on those warnings that are supposedly fixed would be
appreciated. It's really unclear what this patch does.
--
Best regards,
Marek Vasut
_
On Tue, Jan 1, 2019 at 10:40 AM Justus Roßmeier wrote:
>
> Hello,
>
> I just updated my u-boot and found that it won't work on my banana pi m2
> berry anymore, failing with the following message:
>
> U-Boot SPL 2019.01-rc2-00116-g9735326fff (Dec 31 2018 - 12:46:51 +0100)
> DRAM: 0 MiB
> ### ERROR
On Sun, Dec 30, 2018 at 1:25 AM Nikolai Zhubr wrote:
>
> 29.12.2018 21:51, Jagan Teki:
> > On Wed, Dec 26, 2018 at 4:20 PM Nikolai Zhubr wrote:
> >>
> >> Add Hynix H27UBG8T2BTR nand chip identification.
> >> These chips are sometimes present in e.g. older A20-olinuxino-micro boards.
> >
> > So th
Hi Tom,
Please pull this as part of v2019.01 release.
thanks,
Jagan.
The following changes since commit bea3d826203f90507ff32ed24bd0a3c53479e55c:
Merge tag 'signed-efi-2019.01' of git://github.com/agraf/u-boot (2018-12-27
12:59:01 -0500)
are available in the Git repository at:
git://git.
On Tue, Jan 01, 2019 at 07:45:03PM +0100, Álvaro Fernández Rojas wrote:
> - Fixes CONFIG_OF_EMBED warning.
> - Fixes missing CONFIG_BLK warning for CONFIG_USB.
>
> Signed-off-by: Álvaro Fernández Rojas
To be clear, some number of these have been boot tested too, right?
Thanks!
--
Tom
signat
Migration plan for DM_SPI_FLASH is v2019.07 since it
depends on DM_SPI migration.
Signed-off-by: Jagan Teki
---
Changes for v2:
- none
Makefile | 10 ++
1 file changed, 10 insertions(+)
diff --git a/Makefile b/Makefile
index c4d827f259..3e926d839f 100644
--- a/Makefile
+++ b/Makefile
@
- v2019.04 for no dm conversion drivers
- v2019.07 for partially converted drivers.
Note: there were many updates on this deadline, so better
not update this again.
Signed-off-by: Jagan Teki
---
Changes for v2:
- %s/convertion/conversion
- split SPI_FLASH warning in separate patch
Makefile
- Fixes CONFIG_OF_EMBED warning.
- Fixes missing CONFIG_BLK warning for CONFIG_USB.
Signed-off-by: Álvaro Fernández Rojas
---
configs/comtrend_ar5315u_ram_defconfig | 2 +-
configs/comtrend_ar5387un_ram_defconfig | 2 +-
configs/comtrend_ct5361_ram_defconfig| 2 +-
configs/comtrend_vr3032
Correctly enable/disable bcm6368-net controller to avoid flow issues.
Signed-off-by: Álvaro Fernández Rojas
---
drivers/net/bcm6368-eth.c | 109 ++
1 file changed, 62 insertions(+), 47 deletions(-)
diff --git a/drivers/net/bcm6368-eth.c b/drivers/net/
enx.de/git/u-boot-imx.git tags/u-boot-imx-20190101
for you to fetch changes up to 57d2beb91d705bccdfee5e9e5fd267f5e363a100:
pico-imx7d: Increase the CONFIG_ENV_OFFSET size (2019-01-01 14:12:18
+0100)
imx for 2019.01
- introduce s
On 27/12/18 20:16, Fabio Estevam wrote:
> Hi Tom,
>
> On Wed, Dec 26, 2018 at 9:27 PM Tom Rini wrote:
>
>> There's the list of boards that it might be. Doing a for B in ...;do
>> make O=/tmp/$B ${B}_defconfig oldconfig and I see that yup, ids8313
>> trips on the new symbols without having a val
On Fri, Dec 21, 2018 at 07:13:41AM -0800, Bin Meng wrote:
> Register the 'bootm' function for booting VxWorks kernel for
> RISC-V architecture.
>
> Signed-off-by: Bin Meng
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
_
On Fri, Dec 21, 2018 at 07:13:40AM -0800, Bin Meng wrote:
> For future extension to other architectures, make do_bootm_vxworks()
> a non-static function.
>
> Signed-off-by: Bin Meng
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
On Fri, Dec 21, 2018 at 07:13:39AM -0800, Bin Meng wrote:
> Change the scope of do_bootvx_fdt() to static since it is only
> used in common/bootm_os.c.
>
> Signed-off-by: Bin Meng
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
_
On Mon, Dec 31, 2018 at 12:53:19PM +0800, Bin Meng wrote:
> Hi Tom,
>
> This includes x86 edison defconfig file clean up, and coreboot file
> system (cbfs) fixes.
>
> The following changes since commit bea3d826203f90507ff32ed24bd0a3c53479e55c:
>
> Merge tag 'signed-efi-2019.01' of git://githu
52 matches
Mail list logo
