Hi Heiko,
> Hello Marek,
>
> Am 18.03.2014 01:21, schrieb Marek Vasut:
> > On Monday, March 17, 2014 at 11:56:16 AM, Heiko Schocher wrote:
> >> move the flushing code into an extra function dfu_flush(),
> >> so it can be used from other code.
> >>
> >> Signed-off-by: Heiko Schocher
> >> Cc: Lukas
Hi Eli,
On Sun, Mar 16, 2014 at 2:10 AM, Eli Billauer wrote:
> The aligned buffer is always with a higher address, so copying should run
> from the end of the buffer to the beginning, and not the other way around.
>
> Signed-off-by: Eli Billauer
> ---
> drivers/fpga/zynqpl.c |5 +++--
> 1
Hi Marek,
> On Monday, March 17, 2014 at 11:56:16 AM, Heiko Schocher wrote:
> > move the flushing code into an extra function dfu_flush(),
> > so it can be used from other code.
> >
> > Signed-off-by: Heiko Schocher
> > Cc: Lukasz Majewski
> > Cc: Kyungmin Park
> > Cc: Marek Vasut
> > Cc: Pan
From: Jason Jin
T1042 has internal display interface unit (DIU) for driving video.
T1042RDB supports video mode via
-LCD using TI enconder
-HDMI type interface via HDMI encoder
Chrontel, CH7301C encoder which is I2C programmable is used
as HDMI connector on T1042RDB.
This patch add support to
From: Wang Dongsheng
The ch7301 encoder not only used in t1040qds platform, so we split
it for t1042rdb and LSx platform.
Signed-off-by: Wang Dongsheng
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index f6a0879..cd4b33b 100644
--- a/board/freescale/common/Makef
Hi,
How can we define _POST_WORD_ADDR for ARM.In case enabling post for arm
on "post.h" how can i define _POST_WORD_ADDR. how it is defined in other
platform.please tell me the logic behind _POST_WORD_ADDR.
regards,
shobin.b
___
U-Boot mailing lis
Hello Marek,
Am 18.03.2014 01:21, schrieb Marek Vasut:
On Monday, March 17, 2014 at 11:56:16 AM, Heiko Schocher wrote:
move the flushing code into an extra function dfu_flush(),
so it can be used from other code.
Signed-off-by: Heiko Schocher
Cc: Lukasz Majewski
Cc: Kyungmin Park
Cc: Marek Vas
Hi Frank,
On 17 March 2014 01:17, Frank Ihle wrote:
>> The check is done in console_init_f(), the 'f' meaning before
>> relocation, and thus before the environment is loaded and much before
>> the boot command is run. You need to put "silent=1" into your built-in
>> environment in the board confi
On 03/17/2014 02:52 AM, Masahiro Yamada wrote:
> In Kconfig, we use "*_defconfig" files for board configuration.
>
> In Linux Kernel, they are located under arch/${ARCH}/configs/ directory.
> It works in Linux Kernel because ARCH is always given from the
> command line for cross compile.
>
> But
Hi Tom,
This collects up all the remaining sandbox changes to get the
LCD/keyboard emulation running in U-Boot. Most of this was submitted
for the last release but I had to hold back because the LCD was
enabled by default - I think it is better to have it disabled by
default as mentioned at the ti
From: Stefan Roese
There have been 3 versions of the sunxi_emac support patch during its
development. Somehow version 2 ended up in upstream u-boot where as
the u-boot-sunxi git repo got version 3.
This bumps the version in upstream u-boot to version 3 of the patch:
- Initialize MII clock earlie
Based linux-sunxi#sunxi commit d854c4de2f57 "arm: Handle .gnu.hash section in
ldscripts" vs v2014.01.
As well as the following signed-off-by the sunxi branch shows commits to
the sun5i dram bits by:
Berg Xing
Tom Cubie
Signed-off-by: Henrik Nordstrom
Signed-off-by: Stefan Roese
Signed-off-by
From: Henrik Nordstrom
Based linux-sunxi#sunxi commit d854c4de2f57 "arm: Handle .gnu.hash section in
ldscripts" vs v2014.01.
As well as the following signed-off-by the sunxi branch shows commits to
the sunxi_i2c.c file by:
Stefan Roese
Signed-off-by: Henrik Nordstrom
Signed-off-by: Oliver Sc
From: Emilio López
For qualifying hardware, we can run MBUS at 400MHz without risking
stability if we raise the DCDC3 voltage to 1.3V .
This is desirable since on A20 the MBUS is a significant bottle-neck
for some workloads.
This has been tested on 50 pieces of Cubieboard2 by Cubietech and no
i
Signed-off-by: Hans de Goede
---
arch/arm/cpu/armv7/sunxi/board.c | 17 +
boards.cfg | 4 ++--
include/configs/sunxi-common.h | 32
3 files changed, 51 insertions(+), 2 deletions(-)
diff --git a/arch/arm/cpu/armv7/sunxi/bo
From: Henrik Nordstrom
Based linux-sunxi#sunxi commit d854c4de2f57 "arm: Handle .gnu.hash section in
ldscripts" vs v2014.01.
As well as the following signed-off-by the sunxi branch shows commits to
the axp209.c file by:
Stefan Roese
Signed-off-by: Henrik Nordstrom
Signed-off-by: Hans de Goed
Based linux-sunxi#sunxi commit d854c4de2f57 "arm: Handle .gnu.hash section in
ldscripts" vs v2014.01.
As well as the following signed-off-by the sunxi branch shows commits to
the axp152.c file by:
Stefan Roese
Simon "theRat"
Signed-off-by: Henrik Nordstrom
Signed-off-by: Hans de Goede
Signed-
On Monday, March 17, 2014 at 11:56:16 AM, Heiko Schocher wrote:
> move the flushing code into an extra function dfu_flush(),
> so it can be used from other code.
>
> Signed-off-by: Heiko Schocher
> Cc: Lukasz Majewski
> Cc: Kyungmin Park
> Cc: Marek Vasut
> Cc: Pantelis Antoniou
[...]
> @@
Based linux-sunxi#sunxi commit d854c4de2f57 "arm: Handle .gnu.hash section in
ldscripts" vs v2014.01.
As well as the following signed-off-by the sunxi branch shows commits to
the new sun4i dram bits by:
Berg Xing
Tom Cubie
Signed-off-by: Henrik Nordstrom
Signed-off-by: Stefan Roese
Signed-of
Add #ifdef CONFIG_SUN?I were appropriate to make adding sun4i / sun5i support
later easier.
Signed-off-by: Hans de Goede
---
arch/arm/cpu/armv7/sunxi/dram.c | 25 -
1 file changed, 24 insertions(+), 1 deletion(-)
diff --git a/arch/arm/cpu/armv7/sunxi/dram.c b/arch/arm/cp
Hi All,
Here is my continued work on getting various additional sunxi bits ready for
upstreaming on top of Ian's sun7i upstreaming work.
As a basis I'm using Ian's v1 series, without GMAC as that is in a bit of
flux and with various cleanups which were later added to the u-boot-sunxi
repo squashe
Add #ifdef CONFIG_SUN7I were appropriate to make adding sun4i / sun5i support
later easier.
Signed-off-by: Hans de Goede
---
arch/arm/cpu/armv7/sunxi/clock.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/cpu/armv7/sunxi/clock.c b/arch/arm/cpu/armv7/sunxi/clock.c
index 9cdcc8a..d
There is no way to reset the cpu, so use the watchdog for this.
Signed-off-by: Hans de Goede
---
arch/arm/cpu/armv7/sunxi/board.c| 7 +++
arch/arm/include/asm/arch-sunxi/timer.h | 4
2 files changed, 11 insertions(+)
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/
Add #ifdef CONFIG_SUN7I were appropriate to make adding sun4i / sun5i support
later easier.
Signed-off-by: Hans de Goede
---
arch/arm/cpu/armv7/sunxi/board.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
in
Hi,
On 03/17/2014 01:43 PM, Tom Rini wrote:
> On Sun, Mar 16, 2014 at 02:53:50PM +0100, Hans de Goede wrote:
>
>> Signed-off-by: Hans de Goede
>> ---
>> arch/arm/cpu/armv7/sunxi/board.c| 2 +-
>> arch/arm/cpu/armv7/sunxi/clock.c| 2 +
>> arch/arm/cpu/armv7/sunxi/cpu_info.c | 7 ++
On Mon, Mar 17, 2014 at 10:12:24PM +0530, Jagannadha Sutradharudu Teki wrote:
> Hi Tom,
>
> Please take this PR, few fixes.
>
> thanks!
> --
> Jagan.
>
> The following changes since commit 194ba5d4ecb2ad1195333cc7453f291e5b316479:
>
> sh: ecovec: correct romImage address in comment (2014-03-
On Sun, Mar 16, 2014 at 03:19:40PM +, Ian Campbell wrote:
> On Fri, 2014-03-14 at 15:03 -0400, Tom Rini wrote:
> > On 03/14/2014 02:50 PM, Hans de Goede wrote:
> > > Hi,
> > >
> > > On 03/14/2014 03:17 PM, Tom Rini wrote:
> > >> On Fri, Mar 14, 2014 at 10:33:50AM +, Ian Campbell wrote:
> >
> Unfortunately the only documentation we have on the sun7i DRAM
> controller is Allwinner boot0 + boot1 code, and that code uses.. magic
> numbers & shifts with no explanations.
To avoid having to explain this over-and-over again, the code could
include some comment(s) pointing out that these are
Hi Yogi,
On Tue, Feb 18, 2014 at 6:55 AM, yogi p wrote:
> Hi Jagan,
>
> On Sun, Feb 16, 2014 at 10:08 PM, Jagan Teki
> wrote:
>>
>> Hi Yogi,
>>
>> On Sun, Feb 9, 2014 at 2:10 PM, Yogi P wrote:
>> > Hello all,
>> >
>> > From following commit spi write/erase times out on gplugd which uses
>> > AT
Hi Tom,
Please take this PR, few fixes.
thanks!
--
Jagan.
The following changes since commit 194ba5d4ecb2ad1195333cc7453f291e5b316479:
sh: ecovec: correct romImage address in comment (2014-03-14 14:50:28 +0900)
are available in the git repository at:
git://git.denx.de/u-boot-spi.git maste
On Mon, 2014-03-17 at 11:04 -0400, Tom Rini wrote:
> On Sun, Mar 16, 2014 at 01:25:33PM +, Ian Campbell wrote:
> > On Fri, 2014-03-14 at 10:17 -0400, Tom Rini wrote:
> > > On Fri, Mar 14, 2014 at 10:33:47AM +, Ian Campbell wrote:
> >
> > > > +/*
> > > > + * Size of malloc() pool
> > > > +
On Mon, Mar 17, 2014 at 03:29:44PM +, Ian Campbell wrote:
> On Mon, 2014-03-17 at 11:20 -0400, Tom Rini wrote:
> > On Sun, Mar 16, 2014 at 04:45:57PM +, Ian Campbell wrote:
> > > On Sun, 2014-03-16 at 15:19 +, Ian Campbell wrote:
> > > > On Fri, 2014-03-14 at 15:03 -0400, Tom Rini wrote
On Mon, 2014-03-17 at 11:20 -0400, Tom Rini wrote:
> On Sun, Mar 16, 2014 at 04:45:57PM +, Ian Campbell wrote:
> > On Sun, 2014-03-16 at 15:19 +, Ian Campbell wrote:
> > > On Fri, 2014-03-14 at 15:03 -0400, Tom Rini wrote:
> > > > On 03/14/2014 02:50 PM, Hans de Goede wrote:
> > > > > Hi,
>
On Sun, Mar 16, 2014 at 04:45:57PM +, Ian Campbell wrote:
> On Sun, 2014-03-16 at 15:19 +, Ian Campbell wrote:
> > On Fri, 2014-03-14 at 15:03 -0400, Tom Rini wrote:
> > > On 03/14/2014 02:50 PM, Hans de Goede wrote:
> > > > Hi,
> > > >
> > > > On 03/14/2014 03:17 PM, Tom Rini wrote:
> > >
On Sun, Mar 16, 2014 at 01:25:33PM +, Ian Campbell wrote:
> On Fri, 2014-03-14 at 10:17 -0400, Tom Rini wrote:
> > On Fri, Mar 14, 2014 at 10:33:47AM +, Ian Campbell wrote:
>
> > > +/*
> > > + * Size of malloc() pool
> > > + * 1MB = 0x10, 0x10 = 1024 * 1024
> > > + */
> > > +#defin
On Sun, Mar 16, 2014 at 03:09:01PM +, Ian Campbell wrote:
> On Fri, 2014-03-14 at 10:22 -0400, Tom Rini wrote:
> > On Fri, Mar 14, 2014 at 11:28:06AM +, Ian Campbell wrote:
> > > On Fri, 2014-03-14 at 19:11 +0800, Chen-Yu Tsai wrote:
> > [snip]
> > > > I think you should keep them in the sa
On Mon, 2014-03-17 at 09:16 -0400, Stefan wrote:
> > Unfortunately the only documentation we have on the sun7i DRAM
> > controller is Allwinner boot0 + boot1 code, and that code uses.. magic
> > numbers & shifts with no explanations.
>
> To avoid having to explain this over-and-over again, the cod
Hi Fabio,
On 17/03/2014 15:27, Fabio Estevam wrote:
> Hi Stefano,
>
> On Mon, Mar 17, 2014 at 11:22 AM, Stefano Babic wrote:
>
>> Right, but it is to configure the kernel. What I am trying now is to
>> start adding U-Boot configuration via dtb for i.MX, not kernel
>> configuration, similar as w
Hi Stefano,
On Mon, Mar 17, 2014 at 11:22 AM, Stefano Babic wrote:
> Right, but it is to configure the kernel. What I am trying now is to
> start adding U-Boot configuration via dtb for i.MX, not kernel
> configuration, similar as we can already see for other SOC (Tegra,
Yes, I understand your
Hi Fabio,
On 17/03/2014 13:54, Fabio Estevam wrote:
> Hi Stefano,
>
> On Mon, Mar 17, 2014 at 5:58 AM, Stefano Babic wrote:
>
>> --- a/arch/arm/dts/Makefile
>> +++ b/arch/arm/dts/Makefile
>> @@ -2,6 +2,7 @@ dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \
>> exynos5250-snow.dtb \
>>
All pins should be output.
Signed-off-by: Baruch Siach
---
board/renesas/ecovec/ecovec.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/renesas/ecovec/ecovec.c b/board/renesas/ecovec/ecovec.c
index fb4acf3641b5..450e38783056 100644
--- a/board/renesas/ecovec/ecovec.c
+
Enable USB0 clock by resetting bit 20 of MSTPCR2. Leave other bits unchanged.
Signed-off-by: Baruch Siach
---
board/renesas/ecovec/ecovec.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/renesas/ecovec/ecovec.c b/board/renesas/ecovec/ecovec.c
index 450e38783056..2804d9
Hi Lukasz,
> For some time we have been using the run_command() with properly
> crafted string. Such approach turned to be unreliable and error prone.
>
> Switch to "native" mmc subsystem API would allow better type checking
> and shall improve speed.
>
> Also, it seems that this API is changing
Dear tiger...@via-alliance.com,
In message you
wrote:
>
> >You used the correct phrase: it seemed. Except that you broke a
> >number of really important things. If you do not understand what
> >rlocation is needed for, then please gop back and read it in the
> >archives. This has been discuss
Hi Stefano,
On Mon, Mar 17, 2014 at 5:58 AM, Stefano Babic wrote:
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -2,6 +2,7 @@ dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \
> exynos5250-snow.dtb \
> exynos5250-smdk5250.dtb \
> exynos5420-smdk5420.dtb
On Sun, Mar 16, 2014 at 02:53:50PM +0100, Hans de Goede wrote:
> Signed-off-by: Hans de Goede
> ---
> arch/arm/cpu/armv7/sunxi/board.c| 2 +-
> arch/arm/cpu/armv7/sunxi/clock.c| 2 +
> arch/arm/cpu/armv7/sunxi/cpu_info.c | 7 ++
> arch/arm/cpu/armv7/sunxi/dram.c | 129
> ++
T1040rdb has 2 VSC8514 quad PHYs attached to 8 ports from a
layer 2 switch. The PHYs Serdes Auto-negotiation must be enabled
in order to have link between internal PHYs and external PHYs.
Signed-off-by: Codrin Ciubotariu
Cc: York Sun
---
board/freescale/t104xrdb/eth.c | 115
On 03/14/2014 09:33 AM, Beomho Seo wrote:
This patch set for use dw mmc controller.
Patch enable supporting device tree for dw mmc controller.
For use dwmmc controller on trats2 board, enable configuration
dw_mmc, exynos_dwmmc, bounce_buffer and then disable sdhci configuration.
This patch set te
Am 2014-03-15 12:33, schrieb Joakim Tjernlund:
Have you tried the kernel driver for eSPI? I haven't gotten there yet
but
I pray it is better.
yeah kernel driver is better.
-michael
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/ma
Dear Beomho Seo,
On 03/14/2014 09:33 AM, Beomho Seo wrote:
For use dwmmc controller at exynos4, add SDMMC gpio configuration.
In case SDMMC2, do not use 8bit mode at exynos4.
Signed-off-by: Beomho Seo
Signed-off-by: Jaehoon Chung
Cc: Lukasz Majewski
Cc: Piotr Wilczek
Cc: Minkyu Kang
---
Ch
On Wed, Mar 12, 2014 at 11:49:23AM +0100, Marek Vasut wrote:
> On Wednesday, March 12, 2014 at 09:36:31 AM, Ilya Ledvich wrote:
> > Add LAN9500A product ID (0x9e00) in order to support LAN9500A based
> > dongles. Tested on cm_t335.
> >
> > Signed-off-by: Ilya Ledvich
> > ---
> > drivers/usb/eth/
on nand flash using ubi, after the download of the new image into
the flash, the "rest" of the nand sectors get erased while flushing
the medium. With current u-boot version dfu-util may show:
Starting download: [##]
finished!
state(7) = dfuMANIFEST
as the siemens boards use dfu for updating a nand ubi partition
add DFU_MANIFEST_POLL_TIMEOUT to them, so dfu host waits after
complete transfer of the new image for DFU_MANIFEST_POLL_TIMEOUT
ms before sending again an usb request. So the board have enough
time to erase rest of the nand sectors.
S
move the flushing code into an extra function dfu_flush(),
so it can be used from other code.
Signed-off-by: Heiko Schocher
Cc: Lukasz Majewski
Cc: Kyungmin Park
Cc: Marek Vasut
Cc: Pantelis Antoniou
---
- changes for v2
- add comment from Marek Vasut
- move comment and "if" back to df
on nand flash using ubi, after the download of the new image into
the flash, the "rest" of the nand sectors get erased while flushing
the medium. With current u-boot version dfu-util may show:
Starting download: [##]
finished!
state(7) = dfuMANIFEST
Hi Heiko,
> Hello Lukasz,
>
> Am 17.03.2014 10:46, schrieb Lukasz Majewski:
> > Hi Heiko,
> >
> >> Hello Lukasz,
> >>
> >> Am 14.03.2014 11:47, schrieb Lukasz Majewski:
> >>> Hi Heiko,
> >>>
> on nand flash using ubi, after the download of the new image into
> the flash, the "rest" of t
Hello Lukasz,
Am 17.03.2014 10:46, schrieb Lukasz Majewski:
Hi Heiko,
Hello Lukasz,
Am 14.03.2014 11:47, schrieb Lukasz Majewski:
Hi Heiko,
on nand flash using ubi, after the download of the new image into
the flash, the "rest" of the nand sectors get erased while flushing
the medium. With
Hi Heiko,
> Hello Lukasz,
>
> Am 14.03.2014 11:47, schrieb Lukasz Majewski:
> > Hi Heiko,
> >
> >> on nand flash using ubi, after the download of the new image into
> >> the flash, the "rest" of the nand sectors get erased while flushing
> >> the medium. With current u-boot version dfu-util may s
1. The Data timeout counter value in eSDHC_SYSCTL register is
not works as it should be, so add quirks to enable this
workaround to fix it to the max value 0xE.
2. For eSDHC the Block Count per data trasmission should not
exceed 0x, add this limitation to eSDHC host.
3. Add CONFIG_SYS_FSL_ERR
On 03/14/2014 05:16 PM, Wolfgang Denk wrote:
Dear Przemyslaw Marczak,
In message
you wrote:
Changes:
- randomly generate partition uuid if any is undefined
- print info about set/unset/generated uuid
- update doc/README.gpt
...
+ int ret = -1;
char *e, *s;
+ char uuid_s
On 03/14/2014 05:12 PM, Wolfgang Denk wrote:
Dear Przemyslaw Marczak,
In message
you wrote:
This patch adds support to generate UUID (Universally Unique Identifier)
in version 4 based on RFC4122, which is randomly.
Source: https://www.ietf.org/rfc/rfc4122.txt
...
+#define UUID_BIN_LEN
Hello,
On 03/14/2014 05:06 PM, Wolfgang Denk wrote:
Dear Przemyslaw Marczak,
In message
<5ef7cdb8df4fb05c3c371e29d7a61e28e1563a68.1394807506.git.p.marc...@samsung.com>
you wrote:
Changes:
- move uuid<->string conversion functions into lib/uuid.c so they can be
used by code outside part_ef
Signed-off-by: Stefano Babic
---
Makefile |6 +++---
arch/arm/config.mk |4
arch/arm/imx-common/Makefile |8
3 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/Makefile b/Makefile
index 0281171..0f7cabb 100644
--- a/Makefile
++
Signed-off-by: Stefano Babic
CC: Fabio Estevam
---
arch/arm/dts/Makefile |1 +
arch/arm/dts/mx6qsabreauto.dts | 13 +
include/configs/mx6qsabreauto.h |3 +++
3 files changed, 17 insertions(+)
create mode 100644 arch/arm/dts/mx6qsabreauto.dts
diff --git a/arch/
We want to start with a basic set of CONFIG macros:
- CONFIG_SPL, CONFIG_TPL
Enable to support SPL/TPL image
- CONFIG_SPL_BUILD, CONFIG_TPL_BUILD
CONFIG_SPL_BUILD is set when building SPL/TPL.
CONFIG_TPL_BUILD is set when building TPL.
These macros are automatically set and cann
CONFIG_${ARCH} is defined by Kconfig.
Signed-off-by: Masahiro Yamada
---
arch/arc/config.mk | 2 +-
arch/arm/config.mk | 2 +-
arch/avr32/config.mk | 1 -
arch/blackfin/config.mk | 1 -
arch/m68k/config.mk | 2 +-
Copy from Linux Kernel (with a few adjustments in comments).
Signed-off-by: Masahiro Yamada
---
Kconfig | 9 +
Makefile | 20 ++--
2 files changed, 23 insertions(+), 6 deletions(-)
diff --git a/Kconfig b/Kconfig
index 4e383d2..1bf488e 100644
--- a/Kconfig
+++ b/Kconfi
CONFIG_LEON2, CONFIG_LEON3 are defined in Kconfig.
Remove the redundant definition in arch/sparc/cpu/*/config.mk.
Signed-off-by: Masahiro Yamada
---
arch/sparc/cpu/leon2/config.mk | 2 +-
arch/sparc/cpu/leon3/config.mk | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch
Do not apply this patch to the main line
What is this tool?
--
defconfig files for all target boards will be added in the next commit.
We already have more than 1000 boards.
Writing all defcon
This commit enables Kconfig.
Going forward, we use Kconfig for board configuration.
mkconfig will never be used. Nor will include/config.mk be generated.
Kconfig must be adjusted for U-Boot because our situation is
a little more complicated than Linux Kernel.
We have to generate 3 images at most:
- CONFIG_74xx_7xx
- CONFIG_MPC512X
- CONFIG_5xx
- CONFIG_MPC5xxx
- CONFIG_MPC824X
- CONFIG_MPC8260
- CONFIG_MPC83xx
- CONFIG_MPC85xx
- CONFIG_MPC86xx
- CONFIG_8xx
- CONFIG_4xx
are defined in Kconfig.
Remove the redundant definition in arch/powerpc/cpu/*/config.mk.
Signed-off-by: Masah
mkconfig is no longer used in Kconfig.
Signed-off-by: Masahiro Yamada
---
mkconfig | 192 ---
1 file changed, 192 deletions(-)
delete mode 100755 mkconfig
diff --git a/mkconfig b/mkconfig
deleted file mode 100755
index cd911a9..0
We are about to switch to Kconfig in the upcoming commit.
But there are something to get done beforehand.
In Kconfig, include/generated/autoconf.h defines boolean
CONFIG macros as 1.
CONFIG_SPL and CONFIG_TPL, if defined, must be defined as 1.
Otherwise, when switching to Kconfig, the build log
w
We are about to switch to Kconfig in the upcoming commit.
But there are something to get done beforehand.
In Kconfig, include/generated/autoconf.h defines boolean
CONFIG macros as 1.
CONFIG_SPL and CONFIG_TPL, if defined, must be defined as 1.
Otherwise, when switching to Kconfig, the build log
w
- CONFIG_MCF5227x
- CONFIG_MCF523x
- CONFIG_MCF52x2
- CONFIG_MCF520x
- CONFIG_MCF532x
- CONFIG_MCF5301x
- CONFIG_MCF5441x
- CONFIG_MCF5445x
- CONFIG_MCF547x_8x
are defined in Kconfig.
Remove the redundant definition in config headers.
Besides, refactor tricky grepping
in arch/m68k/cpu/{m
Use "make _defconfig" instead of "make _config".
WARNING
This adjustment is not enough.
MAKEALL should parse defconfig files instead of boards.cfg.
This commit has not got this rework done yet.
Signed-off-by: Masahiro Yamada
---
MAKEALL | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(
CONFIG_SH2, CONFIG_SH3, CONFIG_SH4 are defined in Kconfig.
Remove the redundant definition in arch/sh/cpu/*/config.mk
Signed-off-by: Masahiro Yamada
---
arch/sh/cpu/sh2/config.mk | 2 +-
arch/sh/cpu/sh3/config.mk | 2 +-
arch/sh/cpu/sh4/config.mk | 2 +-
3 files changed, 3 insertions(+), 3 del
CONFIG_SPL and CONFIG_TPL are defined in Kconfig.
Remove the redundant definition in config headers.
Signed-off-by: Masahiro Yamada
---
include/configs/BSC9131RDB.h | 1 -
include/configs/BSC9132QDS.h | 1 -
include/configs/C29XPCIE.h | 2 --
include/configs/MPC
Use "make _defconfig" instead of "make _config".
WARNING
This adjustment is not enough.
MAKEALL should parse defconfig files instead of boards.cfg.
This commit has not got this rework done yet.
Signed-off-by: Masahiro Yamada
---
tools/buildman/board.py | 2 +-
tools/buildman/builder.py | 6 +
On 16/03/2014 22:20, Fabio Estevam wrote:
> From: Fabio Estevam
>
> CONFIG_BOOT_INTERNAL is not used anywhere, so let's remove it.
>
> Signed-off-by: Fabio Estevam
> ---
> include/configs/woodburn_sd.h | 2 --
> 1 file changed, 2 deletions(-)
>
> diff --git a/include/configs/woodburn_sd.h b/i
Hi, Denk:
>You used the correct phrase: it seemed. Except that you broke a
>number of really important things. If you do not understand what
>rlocation is needed for, then please gop back and read it in the
>archives. This has been discussed many times before.
For example:
Most ARM SOC platform
> The check is done in console_init_f(), the 'f' meaning before
> relocation, and thus before the environment is loaded and much before
> the boot command is run. You need to put "silent=1" into your built-in
> environment in the board config file.
In my U-boot 2010.06, I tried with #define CONFIG
82 matches
Mail list logo
