on nand flash using ubi, after the download of the new image into the flash, the "rest" of the nand sectors get erased while flushing the medium. With current u-boot version dfu-util may show:
Starting download: [##################################################] finished! state(7) = dfuMANIFEST, status(0) = No error condition is present unable to read DFU status as dfu_get_status is not answered while erasing sectors, if erasing needs some time. So do the following changes to prevent this: - introduce dfuManifest state According to dfu specification [1] section 7: "the device enters the dfuMANIFEST-SYNC state and awaits the solicitation of the status report by the host. Upon receipt of the anticipated DFU_GETSTATUS, the device enters the dfuMANIFEST state, where it completes its reprogramming operations." - when stepping into dfuManifest state, sending a PollTimeout DFU_MANIFEST_POLL_TIMEOUT in ms, to the host, so the host (dfu-util) waits the PollTimeout before sending a get_status again. Patch 0002-usb-dfu-introduce-dfuMANIFEST-state.patch shows following checkpatch errors, but I think they are OK, as the hole file uses CamelCase for the statenames as this in sync with [1] CHECK: Avoid CamelCase: <DFU_STATE_dfuMANIFEST> #103: FILE: drivers/usb/gadget/f_dfu.c:190: + f_dfu->dfu_state = DFU_STATE_dfuMANIFEST; CHECK: Avoid CamelCase: <DFU_STATE_dfuIDLE> #156: FILE: drivers/usb/gadget/f_dfu.c:491: + f_dfu->dfu_state = DFU_STATE_dfuIDLE; CHECK: Avoid CamelCase: <DFU_STATE_dfuERROR> #166: FILE: drivers/usb/gadget/f_dfu.c:501: + f_dfu->dfu_state = DFU_STATE_dfuERROR; total: 0 errors, 0 warnings, 3 checks, 133 lines checked NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX MULTISTATEMENT_MACRO_USE_DO_WHILE NETWORKING_BLOCK_COMMENT_STYLE USLEEP_RANGE [1]: http://www.usb.org/developers/devclass_docs/usbdfu10.pdf - changes for v2: - add Pantelis Antoniou to Cc - add comment from Marek Vasut - move comment and "if" back to dfu_write() - add comment from Lukasz Majewski: - remove unneccessary comment "end?" - add Readme entry for DFU_DEFAULT_POLL_TIMEOUT - remove unneeded flag setpolltimeout - ToDo: - look if it is possible to get rid of the constant DFU_MANIFEST_POLL_TIMEOUT for all dfu entities. Maybe as Lukasz suggested: Add a callback - called e.g. (*poll_timeout) to the struct [mmc|nand]_internal_data. Then some helper functions would be defined at dfu_[mmc|nand].c and used at f_dfu.c so we can decide on a per medium/partition base, how long a PollTimeout would be for a dfu entity ... This can be done in a seperate step. Heiko Schocher (3): usb, dfu: extract flush code into seperate function usb: dfu: introduce dfuMANIFEST state am335x, dfu: add DFU_MANIFEST_POLL_TIMEOUT to the siemens boards README | 10 +++++++ drivers/dfu/dfu.c | 42 +++++++++++++++-------------- drivers/usb/gadget/f_dfu.c | 48 +++++++++++++++++++++++++++++----- include/configs/siemens-am33x-common.h | 1 + include/dfu.h | 4 +++ 5 files changed, 79 insertions(+), 26 deletions(-) Cc: Lukasz Majewski <l.majew...@samsung.com> Cc: Kyungmin Park <kyungmin.p...@samsung.com> Cc: Marek Vasut <ma...@denx.de> Cc: Pantelis Antoniou <pa...@antoniou-consulting.com> -- 1.8.3.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
