On 03/14/2014 09:33 AM, Beomho Seo wrote:
This patch set for use dw mmc controller.
Patch enable supporting device tree for dw mmc controller.
For use dwmmc controller on trats2 board, enable configuration
dw_mmc, exynos_dwmmc, bounce_buffer and then disable sdhci configuration.
This patch set tested on TRATS2 board.
Changes for v2:
- Use device tree for dw mmc controller.
- dw mmc node is added device node on exynos4 device tree.
- dw mmc controller driver is fixed for use exynos4 and 5.
- add fdt compat id of exynos4 dwmmc.
- Add comment.
Beomho Seo (4):
drivers: mmc: dwmmc: enable support for DT
arm: exynos: pinmux: Add sdmmc4 gpio configuration
arm: exynos: clock: Remove exynos4x12_set_mmc_clk function
board: trats2: Enable device tree on Trats2
I tested this series on Trats2.
Tested-by: Piotr Wilczek <p.wilc...@samsung.com>
arch/arm/cpu/armv7/exynos/clock.c | 29 +----------------------------
arch/arm/cpu/armv7/exynos/pinmux.c | 19 +++++++++++++++----
arch/arm/dts/exynos4.dtsi | 8 ++++++++
arch/arm/dts/exynos4412-trats2.dts | 8 ++++++++
drivers/mmc/exynos_dw_mmc.c | 20 ++++++++++++++++----
include/fdtdec.h | 1 +
lib/fdtdec.c | 1 +
7 files changed, 50 insertions(+), 36 deletions(-)
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
