On 09/12/2012 06:56 PM, Tom Rini wrote:
> On Tue, Sep 11, 2012 at 07:53:17AM +0200, Stefan Roese wrote:
>> Hi Pavel,
>>
>> On 09/11/2012 02:21 AM, Pavel Machek wrote:
> From: Dinh Nguyen
>
> Add minimal support for Altera's SOCFPGA Cyclone 5 hardware.
>
> Applied on top of trin
Hi Albert, CC: Joe and Tom
a month ago I have sent 4 Xilinx ARM zynq patches to mailing list (v2)
(reminder yesterday)
and I haven't got any reaction from anybody. The first patches were commented
by Joe and problems fixed in the next version.
There is one network driver which should require AC
Hi Tom,
Thanks for review.
> On 09/12/2012 07:50 AM, Lukasz Majewski wrote:
> > This patch series provides a new command - "gpt" for eMMC partition
> > table (in the GPT format) restoration.
> >
> > As a pre-work, some cleanup at the part_efi.c file was performed to
> > remove custom macros and
I am totally agree with you Fabio. By reading the README.txt, it gives
clear impression regarding NAND that it can also be used as an alternate.
The text should be modify for NAND so that no one further stuck on it.
On Thu, Sep 13, 2012 at 9:55 AM, Fabio Estevam wrote:
> Hi Stefano,
>
> On Wed,
Dear Stefano,
You really explained well. I have got it now. For now I have left the NAND
flash and instead I'm now using NOR. I have successfully boot Linux with
the latest kernel 3.5.3 from NOR.
Thanks a lot for all your support.
On Thu, Sep 13, 2012 at 2:44 AM, stefano babic wrote:
> Am 12/09
Hi All,
Do let me know if any more comments on this patchset.
Regards,
Rajeshwari Shinde.
On Wed, Aug 22, 2012 at 12:14 PM, Rajeshwari Shinde
wrote:
> This patchset adds the audio support for EXYNOS5.
> This patchset plays a predefined beep sound.
>
> This patchset is based on the following pa
On Wed, Sep 12, 2012 at 5:46 PM, Tetsuyuki Kobayashi wrote:
> Set gpio config for I2C2.
>
> Signed-off-by: Tetsuyuki Kobayashi
> ---
> Changes for v2:
> - new
>
> board/kmc/kzm9g/kzm9g.c |2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/board/kmc/kzm9g/kzm9g.c b/board/kmc/kzm9g/kzm9
Hi,
Thank you for this work.
If you have a time, could you update sh_i2c using set/clrbits functions?
these functions is included in asm/io.h.
For example, you can change from
writeb(readb(&base->iccr) & ~SH_I2C_ICCR_ICE, &base->iccr);
to
clrbits_8(&base->iccr, SH_I2C_ICCR_ICE);
.
Best regards,
On Wed, Sep 12, 2012 at 5:46 PM, Tetsuyuki Kobayashi wrote:
> Supply clock to I2C1 and release resetting.
>
> Signed-off-by: Tetsuyuki Kobayashi
> ---
> Changes for v2:
> - new
>
> board/kmc/kzm9g/kzm9g.c |5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/board/kmc
On Wed, Sep 12, 2012 at 5:46 PM, Tetsuyuki Kobayashi wrote:
> irq_wait() was not used. So removed it to elminate compiler warnings.
>
> Signed-off-by: Tetsuyuki Kobayashi
> ---
> Changes for v2:
> - new
>
> drivers/i2c/sh_i2c.c | 16
> 1 file changed, 16 deletions(-)
>
> diff
On Wed, Sep 12, 2012 at 5:21 PM, Tetsuyuki Kobayashi wrote:
> Before this patch, i2c_{read,write} always returned 0.
> Check TACK in i2c_raw_{read,write} so that i2c_{read,write} return non-zero
> when error.
>
> Signed-off-by: Tetsuyuki Kobayashi
> ---
> Changes for v2:
> - new
>
> drivers/i2
On Wed, Sep 12, 2012 at 5:46 PM, Tetsuyuki Kobayashi wrote:
> R-mobile SoC (at least SH73A0) has extension bits to store 8th bit of iccl
> and icch.
> This patch add support for the extentin bits.
>
> Signed-off-by: Tetsuyuki Kobayashi
> ---
> Changes for v2:
> - define CONFIG_SH_I2C_8BIT at bo
On Wed, Sep 12, 2012 at 5:46 PM, Tetsuyuki Kobayashi wrote:
> Before this patch i2c_probe() always returned 0 and "i2c probe" command did
> not work properly.
>
> Modify i2c_set_addr() to check TACK when waiting DTE and make i2c_probe()
> call this function.
>
> Signed-off-by: Tetsuyuki Kobayash
On Wed, Sep 12, 2012 at 5:21 PM, Tetsuyuki Kobayashi wrote:
> sh_i2c.c support I2C0 and I2C1. This patch extends it to I2C4.
>
> Signed-off-by: Tetsuyuki Kobayashi
> ---
> Changes for v2:
> - new
>
> drivers/i2c/sh_i2c.c| 15 +++
> include/configs/kzm9g.h |5 -
> 2 fil
Hi Stefano,
On Wed, Sep 12, 2012 at 7:06 PM, stefano babic wrote:
> Ok - before you put your next version, is imx-common the right place fir
> it ? I mean, in imx-common we should put code that can be shared among
> different Freescale's SOCs. The imximage you want to share is common to
> some b
Hi Stefano,
On Wed, Sep 12, 2012 at 6:44 PM, stefano babic wrote:
> U-Boot for mx35pdk runs from NOR and not from NAND. There is no support
> to run from NAND. Even if I can "convince" the board to boot from NAND,
> this was not pushed to mainline. I explain why.
Reading board/freescale/mx35pdk
Hi Marek,
I'll queue this up this weekend.
The merge window for v2012.10 closed September 18. Unless there is an
overriding urgency, the patch will go into the following release.
On 09/05/2012 02:34 AM, Marek Vasut wrote:
> In case the "fdt addr" command wasn't ran yet and any other "fdt"
> sub
Hi Kim, Minghuan,
On 09/12/2012 08:08 PM, Kim Phillips wrote:
> On Mon, 27 Aug 2012 19:38:59 -0500
> Kim Phillips wrote:
>
>> From: Minghuan Lian
>>
>> Some properties may contain multiple values, these values may need
>> to be added to the property respectively. this patch provides this
>> fun
Hi Marek,
On 09/12/2012 10:01 PM, Marek Vasut wrote:
Dear José Miguel Gonçalves,
Serial driver for the S3C24XX SoCs.
Signed-off-by: José Miguel Gonçalves
---
drivers/serial/Makefile |1 +
drivers/serial/s3c24xx_serial.c | 146
+++ 2 files ch
On 09/12/2012 03:57 PM, Rob Herring wrote:
> On 09/12/2012 05:49 PM, Tom Rini wrote:
>> On Mon, Aug 13, 2012 at 01:28:19PM -0500, Rob Herring wrote:
>>> On 08/13/2012 06:52 AM, Wolfgang Denk wrote:
Dear Rob Herring,
In message <50244d5a.3080...@gmail.com> you wrote:
>
> I rep
Dear José Miguel Gonçalves,
> On 09/13/2012 01:24 AM, Marek Vasut wrote:
> > Dear José Miguel Gonçalves,
> >
> >> Hi Scott,
> >>
> >> On 09/13/2012 12:20 AM, Scott Wood wrote:
> >>> On 09/12/2012 06:16 PM, José Miguel Gonçalves wrote:
> Hi Marek,
>
> On 09/12/2012 10:11 PM, Marek
On 09/13/2012 01:24 AM, Marek Vasut wrote:
Dear José Miguel Gonçalves,
Hi Scott,
On 09/13/2012 12:20 AM, Scott Wood wrote:
On 09/12/2012 06:16 PM, José Miguel Gonçalves wrote:
Hi Marek,
On 09/12/2012 10:11 PM, Marek Vasut wrote:
Dear José Miguel Gonçalves,
+
+/*
+ * Hardware specific acc
Dear José Miguel Gonçalves,
> Hi Scott,
>
> On 09/13/2012 12:20 AM, Scott Wood wrote:
> > On 09/12/2012 06:16 PM, José Miguel Gonçalves wrote:
> >> Hi Marek,
> >>
> >> On 09/12/2012 10:11 PM, Marek Vasut wrote:
> >>> Dear José Miguel Gonçalves,
> >>>
> +
> +/*
> + * Hardware spec
Hi Scott,
On 09/13/2012 12:20 AM, Scott Wood wrote:
On 09/12/2012 06:16 PM, José Miguel Gonçalves wrote:
Hi Marek,
On 09/12/2012 10:11 PM, Marek Vasut wrote:
Dear José Miguel Gonçalves,
+
+/*
+ * Hardware specific access to control-lines function
+ */
+static void s3c_nand_hwcontrol(struct
On 09/13/2012 12:45 AM, Marek Vasut wrote:
Dear José Miguel Gonçalves,
Hi Marek,
On 09/12/2012 10:11 PM, Marek Vasut wrote:
Dear José Miguel Gonçalves,
+
+/*
+ * Hardware specific access to control-lines function
+ */
+static void s3c_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned
i
Dear José Miguel Gonçalves,
> Hi Marek,
>
> On 09/12/2012 10:11 PM, Marek Vasut wrote:
> > Dear José Miguel Gonçalves,
> >
> >> +
> >> +/*
> >> + * Hardware specific access to control-lines function
> >> + */
> >> +static void s3c_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned
> >> int c
Dear Bill,
> I'm using U-boot version: U-Boot 2012.07
>
> Through googling, I've come across several variations of using a
> ramdisk. So I selected some things that looked good. So basically, I
> am building a rootfs as a ramdisk by:
>
> dd if=/dev/zero of=./myinitrd.img bs=1M count=35
>
On Thu, Sep 13, 2012 at 01:17:03AM +0200, Daniel Schwierzeck wrote:
> Hi Tom,
>
> The following changes since commit e66443fdb5355e68cfdbbdd37248c4b7eb4968f5:
>
> Makefile: fix HAVE_VENDOR_COMMON_LIB (2012-08-17 18:07:12 +0200)
>
> are available in the git repository at:
>
> git://git.denx.
Dear Stephen Warren,
> On 09/12/2012 04:38 PM, Marek Vasut wrote:
> > Dear Stephen Warren,
> >
> >> On 09/12/2012 10:19 AM, Tom Warren wrote:
> >>> Folks,
> >>>
> >>> Stephen Warren has posted an internal bug regarding the cache
> >>> alignment 'warnings' seen on Tegra20 boards when accessing MM
Hi Marek,
On 09/12/2012 10:03 PM, Marek Vasut wrote:
Dear José Miguel Gonçalves,
+static inline void rtc_access_disable(void)
+{
+ s3c24xx_rtc *const rtc = s3c24xx_get_base_rtc();
+ uchar rtccon;
+
+ rtccon = readb(&rtc->rtccon);
+ rtccon &= ~0x01;
Magic numbers, fix g
I'm using U-boot version: U-Boot 2012.07
Through googling, I've come across several variations of using a
ramdisk. So I selected some things that looked good. So basically, I
am building a rootfs as a ramdisk by:
dd if=/dev/zero of=./myinitrd.img bs=1M count=35
mke2fs -m 1 ./myinitr
On 09/12/2012 06:16 PM, José Miguel Gonçalves wrote:
> Hi Marek,
>
> On 09/12/2012 10:11 PM, Marek Vasut wrote:
>> Dear José Miguel Gonçalves,
>>
>>> +
>>> +/*
>>> + * Hardware specific access to control-lines function
>>> + */
>>> +static void s3c_nand_hwcontrol(struct mtd_info *mtd, int cmd,
>>>
Hi Tom,
The following changes since commit e66443fdb5355e68cfdbbdd37248c4b7eb4968f5:
Makefile: fix HAVE_VENDOR_COMMON_LIB (2012-08-17 18:07:12 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-mips.git master
for you to fetch changes up to b1418d90e7adf236433b1e2bf88e
Hi Marek,
On 09/12/2012 10:11 PM, Marek Vasut wrote:
Dear José Miguel Gonçalves,
+
+/*
+ * Hardware specific access to control-lines function
+ */
+static void s3c_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int
ctrl) +{
+ s3c24xx_nand *const nand = s3c24xx_get_base_nand();
+
On 09/12/2012 04:38 PM, Marek Vasut wrote:
> Dear Stephen Warren,
>
>> On 09/12/2012 10:19 AM, Tom Warren wrote:
>>> Folks,
>>>
>>> Stephen Warren has posted an internal bug regarding the cache
>>> alignment 'warnings' seen on Tegra20 boards when accessing MMC. Here's
>>> the gist:
>>>
>>> Executi
On 09/12/2012 05:49 PM, Tom Rini wrote:
> On Mon, Aug 13, 2012 at 01:28:19PM -0500, Rob Herring wrote:
>> On 08/13/2012 06:52 AM, Wolfgang Denk wrote:
>>> Dear Rob Herring,
>>>
>>> In message <50244d5a.3080...@gmail.com> you wrote:
I reported already that the prior version that ext4 has i
On Mon, Aug 13, 2012 at 01:28:19PM -0500, Rob Herring wrote:
> On 08/13/2012 06:52 AM, Wolfgang Denk wrote:
> > Dear Rob Herring,
> >
> > In message <50244d5a.3080...@gmail.com> you wrote:
> >>
> >> I reported already that the prior version that ext4 has issues with
> >> sub-directories. I don't t
Dear Stephen Warren,
> On 09/12/2012 10:19 AM, Tom Warren wrote:
> > Folks,
> >
> > Stephen Warren has posted an internal bug regarding the cache
> > alignment 'warnings' seen on Tegra20 boards when accessing MMC. Here's
> > the gist:
> >
> > Executing "mmc dev 0" still yields cache warnings:
>
Dear Ellis Andrew,
> Hi,
>
> I'm not sure if this is specifically related to u boot.
>
> I have compiled a linux kernel, which if I run on a system with flash
> memory with 256k sector size there are no problems, however if I rebuild
> for a system using flash with 64k sector size the boot proc
Dear Bill,
> Has anyone used U-boot on the imx28evk with initrd to setup a small
> rootfs in RAM? I need the ability to do have a small temp rootfs to
> assist in mounting a full rootfs from a USB for field upgrade purposes.
Yes, it's a linux thingie though. What's the problem? What version of u
Signed-off-by: Tom Warren
---
include/configs/cardhu.h | 52 +++
include/configs/tegra30-common.h | 188 ++
2 files changed, 240 insertions(+), 0 deletions(-)
create mode 100644 include/configs/cardhu.h
create mode 100644 include/configs/te
This builds & boots to the command prompt on a Cardhu (T30) board.
This is a barebones binary - no I2C, USB, MMC, SPI, etc.
Drivers for those peripherals to follow.
Signed-off-by: Tom Warren
---
Makefile| 23 +++
arch/arm/cpu/armv7/Makefile |2 +-
ar
Signed-off-by: Tom Warren
---
board/nvidia/common/board.c | 27 ++-
1 files changed, 26 insertions(+), 1 deletions(-)
diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
index afe832a..4a86c30 100644
--- a/board/nvidia/common/board.c
+++ b/board/nvidi
Signed-off-by: Tom Warren
---
board/nvidia/cardhu/Makefile | 48
board/nvidia/cardhu/cardhu.c | 87 +++
board/nvidia/cardhu/pinmux-config-common.h | 346
3 files changed, 481 insertions(+), 0 deletions(-)
create mode 100644 b
Signed-off-by: Tom Warren
---
arch/arm/dts/tegra30.dtsi | 280 +++
board/nvidia/dts/tegra30-cardhu.dts | 92
2 files changed, 372 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/dts/tegra30.dtsi
create mode 100644 board/nvidia/
Signed-off-by: Tom Warren
---
arch/arm/cpu/armv7/tegra30/Makefile | 48 +
arch/arm/cpu/armv7/tegra30/cmd_enterrcm.c | 65 +
arch/arm/cpu/armv7/tegra30/config.mk | 26 +++
3 files changed, 139 insertions(+), 0 deletions(-)
c
Signed-off-by: Tom Warren
---
arch/arm/cpu/arm720t/tegra30/Makefile | 48 +++
arch/arm/cpu/arm720t/tegra30/board.h | 25 ++
arch/arm/cpu/arm720t/tegra30/config.mk | 26 ++
arch/arm/cpu/arm720t/tegra30/cpu.c | 570
arch/arm/cpu/arm720t/tegra30/cpu.h
This patch series adds basic (boot to cmd prompt) support for Tegra30.
This is based on the Tegra20 SPL, which initializes the AVP (ARM7TDMI
boot proc) first, then control is transferred to the CPU (A9 quad cluster).
It is based on current u-boot-tegra/next.
Future patches will add support/drivers
Am 12/09/2012 20:22, schrieb Fabio Estevam:
> Jason,
>
Hi Fabio,
> On Tue, Sep 11, 2012 at 11:26 PM, Liu Hui-R64343 wrote:
>
>> Are you sure that we can use on DDR3 script to cover 3 kind of boards:
>>
>> ARM2/Sabrelite/SabreSD? Did you do the DDR stress test?
>
> Ok, looking more closely at
Am 12/09/2012 23:07, schrieb Marek Vasut:
> Dear Muhammad Usman,
>
Hi Muhammad,
> Ccing Stefano.
>
>> I am adding support of imx35pdk in yocto.
>> I have done with my bsp. But the u-boot that build in response of my bsp
>> only runs over NOR and not on NAND. I spend 2 days on it but failed to d
From: "Ira W. Snyder"
The SPI pins are routed to header J8 for testing SPI functionality. A
Spansion flash has been wired up and tested on this header.
This patch breaks support for the second TSEC interface, since the GPIO
pin used as a chip select is pinmuxed with some of the TSEC pins.
Signe
From: "Ira W. Snyder"
The MPC8308RDB Reference Manual states that no bits in the SPMODE
register are allowed to change while the enable (EN) bit is set.
This driver changes the character length bits (LEN) while the enable
(EN) bit is set. Clearing the EN bit while changing the LEN bits makes
the
From: "Ira W. Snyder"
Add support for the onboard eSDHC MMC controller. The hardware on the
MPC8308RDB has the following errata:
- ESDHC111: manual asynchronous CMD12 is broken
- DMA is broken (PIO works)
Signed-off-by: Ira W. Snyder
---
board/freescale/mpc8308rdb/mpc8308rdb.c |8
From: "Ira W. Snyder"
This is very useful on a modern system.
Signed-off-by: Ira W. Snyder
---
include/configs/MPC8308RDB.h |4
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h
index a24538a..c65635f 100644
---
From: "Ira W. Snyder"
Add support for the S25FL256S1 flash chip. It is a 256Mb (32MB) flash
comprised of 64KB pages.
Signed-off-by: Ira W. Snyder
---
drivers/mtd/spi/spansion.c |8
1 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/drivers/mtd/spi/spansion.c b/drivers/
From: "Ira W. Snyder"
This series improves the hardware support for the Freescale MPC8308RDB board.
Optional support for the SPI pins routed to header J8 is added for testing SPI
flash chips. This was tested with a Spansion S25FL256S1. This is not enabled
by default, because it breaks TSEC2 due
Dear José Miguel Gonçalves,
> NAND Flash driver with HW ECC for the S3C24XX SoCs.
> Currently it only supports SLC NAND chips.
>
> Signed-off-by: José Miguel Gonçalves
> ---
> drivers/mtd/nand/Makefile |1 +
> drivers/mtd/nand/s3c24xx_nand.c | 269
> ++
Dear Muhammad Usman,
Ccing Stefano.
> I am adding support of imx35pdk in yocto.
> I have done with my bsp. But the u-boot that build in response of my bsp
> only runs over NOR and not on NAND. I spend 2 days on it but failed to do
> so. I read some where that mx35pdk required some external 4-pins
Dear chandan mohanty,
> Hi,
> I am a new member to u-boot mail list.
> I have the source code of u-boot downloaded.I am aware that
> /boot,/board,/driver,include/config are the directory of imprtance.
> I am trying to read the code.
>
> 1.I see that there are lots of other files and lots of
Dear José Miguel Gonçalves,
> RTC driver for the S3C24XX SoCs.
>
> Signed-off-by: José Miguel Gonçalves
> ---
> drivers/rtc/Makefile |1 +
> drivers/rtc/s3c24xx_rtc.c | 166
> + 2 files changed, 167
> insertions(+)
> create mode 100644 drive
Dear José Miguel Gonçalves,
> Serial driver for the S3C24XX SoCs.
>
> Signed-off-by: José Miguel Gonçalves
> ---
> drivers/serial/Makefile |1 +
> drivers/serial/s3c24xx_serial.c | 146
> +++ 2 files changed, 147 insertions(+)
> create mode 10064
Hi,
I am a new member to u-boot mail list.
I have the source code of u-boot downloaded.I am aware that
/boot,/board,/driver,include/config are the directory of imprtance.
I am trying to read the code.
1.I see that there are lots of other files and lots of APIs in the above
direcories.Can s
I am adding support of imx35pdk in yocto.
I have done with my bsp. But the u-boot that build in response of my bsp
only runs over NOR and not on NAND. I spend 2 days on it but failed to do
so. I read some where that mx35pdk required some external 4-pins bla bla
something like that.
Also the u-boot
Jason,
On Tue, Sep 11, 2012 at 11:26 PM, Liu Hui-R64343 wrote:
> Are you sure that we can use on DDR3 script to cover 3 kind of boards:
>
> ARM2/Sabrelite/SabreSD? Did you do the DDR stress test?
Ok, looking more closely at this I will keep the ARM2 DDR3 init as is
in my v2 series.
sabrelite a
ons 2012-09-12 klockan 11:26 +1000 skrev Graeme Russ:
> I must make an apology - I had committed to assisting you and Tom in
> bringing this port into mainline U-Boot (including investigating the
> SPL breakage et. al.).
No need to apology. We all have life (to various degrees) outside
computers.
Hi Vikram,
On Wed, Sep 12, 2012 at 2:30 PM, Vikram Narayanan wrote:
> According to this commit,
> "CONFIG_SYS_BAUDRATE_TABLE: Add , place there"
> (26750c8aee2383a026e0cf89e9310628d3a5a6a0), the above line isn't required
> anymore. Right?
Yes, you are right. Will remove it in v2.
Thanks,
Fabi
On 9/12/2012 12:02 AM, Fabio Estevam wrote:
mx6qsabresd is a board based on mx6q SoC with the following features:
- 1GB of DDR3
- 1 USB OTG port
- 1 HDMI output port
- SPI NOR
- LVDS panel
- Gigabit Ethernet
- Camera Connector
- eMMC and SD card slot
- Audio
Add very basic support for it.
Signe
On 09/12/2012 07:50 AM, Lukasz Majewski wrote:
> This patch series provides a new command - "gpt" for eMMC partition table
> (in the GPT format) restoration.
>
> As a pre-work, some cleanup at the part_efi.c file was performed to
> remove custom macros and make GPT related structures more readable
On 09/12/2012 07:50 AM, Lukasz Majewski wrote:
> The restoration of GPT table (both primary and secondary) is now possible.
> Simple GUID generation is supported.
>
> Signed-off-by: Lukasz Majewski
> Signed-off-by: Kyungmin Park
[sinp]
> +
> + printf("GPT successfully written to block device
On 09/12/2012 07:50 AM, Lukasz Majewski wrote:
> New command - "gpt" is supported. It restores the GPT partition table.
> It looks into the "partitions" environment variable for partitions definition.
> It can be enabled at target configuration file with CONFIG_CMD_GPT.
> Simple UUID generator has
On Wed, Sep 12, 2012 at 09:59:30AM +0200, Marek Vasut wrote:
> Dear Mike Frysinger,
>
> > On Tue, Sep 11, 2012 at 3:08 PM, Marek Vasut wrote:
> > > The GCC does not support this on blackfin, disable it.
> >
> > err, no, you're probably using gcc-4.5.x which didn't support
> > -fstack-usage. that
On 09/10/2012 05:21 PM, Pavel Machek wrote:
> Hi!
>
>>> From: Dinh Nguyen
>>>
>>> Add minimal support for Altera's SOCFPGA Cyclone 5 hardware.
>>>
>>> Applied on top of trini/WIP/spl-improvements v6
>> [...]
>>
>> __noreturn attribute to reset_cpu() is still missing, but that's a
>> minor thing.
On Tue, Sep 11, 2012 at 07:53:17AM +0200, Stefan Roese wrote:
> Hi Pavel,
>
> On 09/11/2012 02:21 AM, Pavel Machek wrote:
> >>> From: Dinh Nguyen
> >>>
> >>> Add minimal support for Altera's SOCFPGA Cyclone 5 hardware.
> >>>
> >>> Applied on top of trini/WIP/spl-improvements v6
> >> [...]
> >>
>
On 09/12/2012 10:19 AM, Tom Warren wrote:
> Folks,
>
> Stephen Warren has posted an internal bug regarding the cache
> alignment 'warnings' seen on Tegra20 boards when accessing MMC. Here's
> the gist:
>
> Executing "mmc dev 0" still yields cache warnings:
>
> Tegra20 (Harmony) # mmc dev 0
> ERR
On 09/12/2012 12:00 AM, Lukasz Majewski wrote:
> Hi Stephen, Tom,
>
>
>> Rob's series depends on Wolfgang(?)'s u-boot/ext4 branch at present.
>> I'm not sure what the status of that branch is right now - is it
>> something that's ready to be submitted, or is more work there needed,
>> so the bran
On 09/11/2012 03:52 PM, Stephen Warren wrote:
> On 09/05/2012 05:58 PM, Tom Rini wrote:
>> On Wed, Sep 05, 2012 at 06:51:58PM -0500, Rob Herring wrote:
>>> On 09/05/2012 05:03 PM, Stephen Warren wrote:
From: Stephen Warren
This implements the following:
part uuid mmc 0:1
>
On Fri, Sep 07, 2012 at 11:06:31AM +0530, Chander Kashyap wrote:
> Now DT support is becoming common for all new SoC's. Hence it is better
> to have option for getting specific FDT from the remote server.
>
> This patch adds support for new label i.e. 'fdt'. This will allow to
> retrieve 'fdt blo
Folks,
Stephen Warren has posted an internal bug regarding the cache
alignment 'warnings' seen on Tegra20 boards when accessing MMC. Here's
the gist:
Executing "mmc dev 0" still yields cache warnings:
Tegra20 (Harmony) # mmc dev 0
ERROR: v7_dcache_inval_range- stop address is not aligned- 0x3fb6
On Wed, Sep 12, 2012 at 10:32 AM, Joe Hershberger wrote:
> On Wed, Sep 12, 2012 at 4:51 AM, Marek Vasut wrote:
>> Dear Marek Vasut,
>>> The buf variable in bfin_mac.c is not used and produces warning,
>>> fix it.
>>>
>>> bfin_mac.c: In function 'bfin_EMAC_send':
>>> bfin_mac.c:125:16: warning: vari
On 09/10/2012 10:32 PM, bastian.rupp...@sewerin.de wrote:
> Hello, Prabhakar, hello Tom
>
>> On Monday 10 September 2012 09:38 PM, Tom Rini wrote:
>>> On Sun, Sep 9, 2012 at 11:01 PM, wrote:
Hello,
> Re: [U-Boot] [PATCH v3 5/6] da850/omap-l138: davinci_emac: Suppress
> auto neg
Hey all,
I know some of you have known me for ages, and some of you only as long
as my jaunt back into U-Boot over the last year. Rather than talk
myself up, I'd like to go with actions to let everyone know you're in
good hands.
I'd like to ask a few things of the community right now. If you're
Enable support for GPT partition table restoration at Samsung's Trats
development board.
Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
---
Changes for v2:
- New format for default GPT partitions (key=value pairs)
- replace size definitions with more readable description(1GiB inste
New command - "gpt" is supported. It restores the GPT partition table.
It looks into the "partitions" environment variable for partitions definition.
It can be enabled at target configuration file with CONFIG_CMD_GPT.
Simple UUID generator has been implemented. It uses the the gd->start_addr_sp
for
From: Chang Hyun Park
Custom definitions of le_XX_to_int functions have been replaced with
standard ones, defined at
Replacement of several GPT related structures members with ones
indicating its endianness and proper size.
Signed-off-by: Chang Hyun Park
Signed-off-by: Lukasz Majewski
Signed
This move is necessary to export gpt header and GPT partition entries to be
used with other commands or subsystems (like DFU in the future)
Additionally the part_efi.h file has been cleaned-up to supress checkpatch's
warnings.
Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
---
disk
The restoration of GPT table (both primary and secondary) is now possible.
Simple GUID generation is supported.
Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
---
Changes for v2:
- Move GPT Header and Page Table Entries generation code to cmd_gpt.c
- Provide clean API to use set_gp
Documentation of the GPT format.
Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
---
Changes for v2:
- Typos correction.
- Adding guidlines about GPT restoration.
- Adding information about GUID generator
---
doc/README.gpt | 207 +++
The ustrtoul shall convert string defined size (e.g. 1GiB) to unsigned
long type (as its name implies).
Up till now it had returned int, which might cause problems with large
numbers (GiB range), when interpreted as U2 signed numbers.
Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
This patch series provides a new command - "gpt" for eMMC partition table
(in the GPT format) restoration.
As a pre-work, some cleanup at the part_efi.c file was performed to
remove custom macros and make GPT related structures more readable.
Moreover the part_efi.h file has been moved to ./inclu
Hi Chang Hyun,
> Hello Lukasz, Stephen,
> I see there has been quite a few mails going back and forth on the
> mailing list on the "gpt: Replace the leXX_to_int() calls with ones
> defined at "I haven't been receiving the e-mails because
> my samsung e-mail account has expired.(Internship expired
On Wed, Sep 12, 2012 at 4:51 AM, Marek Vasut wrote:
> Dear Marek Vasut,
>
>> The buf variable in bfin_mac.c is not used and produces warning,
>> fix it.
>>
>> bfin_mac.c: In function 'bfin_EMAC_send':
>> bfin_mac.c:125:16: warning: variable 'buf' set but not used
>> [-Wunused-but-set-variable]
>>
This patch adds the support for Samsung's S3C24XX SoCs that have an ARM926EJS
core.
Currently it supports S3C2412, S3C2413, S3C2416 and S3C2450.
Tested on an S3C2416 platform.
Signed-off-by: José Miguel Gonçalves
---
arch/arm/cpu/arm926ejs/s3c24xx/Makefile | 52 +++
arch/arm/cpu/arm92
Support for the MINI2416 board based on a Samsung's S3C2416 SoC with
64MB DDR2 SDRAM, 256MB NAND Flash, a LAN9220 Ethernet Controller and a
WM8731 Audio CODEC.
José Miguel Gonçalves (7):
ARM: fix relocation on ARM926EJS
S3C24XX: Add core support for Samsung's S3C24XX SoCs
S3C24XX: Add serial
The MINI2416 board is based on a Samsung's S3C2416 SoC and has 64MB DDR2 SDRAM,
256MB NAND Flash, a LAN9220 Ethernet Controller and a WM8731 Audio CODEC.
This U-Boot port was implemented and tested on a unit bought to Boardcon
(http://www.armdesigner.com/) but there are some other chinese providers
NAND Flash driver with HW ECC for the S3C24XX SoCs.
Currently it only supports SLC NAND chips.
Signed-off-by: José Miguel Gonçalves
---
drivers/mtd/nand/Makefile |1 +
drivers/mtd/nand/s3c24xx_nand.c | 269 +++
2 files changed, 270 insertions(+)
cr
Serial driver for the S3C24XX SoCs.
Signed-off-by: José Miguel Gonçalves
---
drivers/serial/Makefile |1 +
drivers/serial/s3c24xx_serial.c | 146 +++
2 files changed, 147 insertions(+)
create mode 100644 drivers/serial/s3c24xx_serial.c
diff --gi
Jumping to board_init_r is not performed due to a bug on address computation.
Relocation offsets are not needed when building SPL.
Signed-off-by: José Miguel Gonçalves
---
arch/arm/cpu/arm926ejs/start.S |4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm/cpu/arm926
Samsung's S3C24XX SoCs need this in order to generate a binary image with the
SPL and U-Boot concatenated.
Signed-off-by: José Miguel Gonçalves
---
Makefile |7 ---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/Makefile b/Makefile
index 058fb53..595b5f6 100644
--- a/Make
RTC driver for the S3C24XX SoCs.
Signed-off-by: José Miguel Gonçalves
---
drivers/rtc/Makefile |1 +
drivers/rtc/s3c24xx_rtc.c | 166 +
2 files changed, 167 insertions(+)
create mode 100644 drivers/rtc/s3c24xx_rtc.c
diff --git a/drivers/rtc
On 08/16/2012 08:30 AM, Michal Simek wrote:
Add support for Xilinx Zynq board.
Signed-off-by: Michal Simek
---
v2: Forget to also add config file
v3: Change name for serial driver
Remove lowlevel_init from board folder
Remove XPSS part from timer baseaddr
Change name for Zynq g
1 - 100 of 134 matches
Mail list logo
