Am 12/09/2012 20:22, schrieb Fabio Estevam: > Jason, > Hi Fabio,
> On Tue, Sep 11, 2012 at 11:26 PM, Liu Hui-R64343 <r64...@freescale.com> wrote: > >> Are you sure that we can use on DDR3 script to cover 3 kind of boards: >> >> ARM2/Sabrelite/SabreSD? Did you do the DDR stress test? > > Ok, looking more closely at this I will keep the ARM2 DDR3 init as is > in my v2 series. > > sabrelite and sabresd does have the same DDR3 init as per the FSL U-boot > source. > > arm2 has a different DDR3 density, so I will not touch this file. Ok - before you put your next version, is imx-common the right place fir it ? I mean, in imx-common we should put code that can be shared among different Freescale's SOCs. The imximage you want to share is common to some boards, not SOCs. Should we put it into a freescale's directory, let see something into boards/freescale ? There is already a boards/freescale/common, but it is PowerPC specific, so maybe it is not the right place, but we could add a new one. What do you think ? Best regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
