Re: [RE-wrenches] RETURN AMP SETTING

2010-07-23 Thread Roy Butler
Endurance Wind Power before proceeding. Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer PA Sunshine Program Approved PV Installer Four Winds Renewable Energy, LLC 8902 Route 46 Arkport, NY 14807 607-324-9747 www.four-winds-energy.com Although no trees

Re: [RE-wrenches] wind scam?

2010-07-24 Thread Roy Butler
tell us a thing about it's ability to produce kilowatt hours to the grid. What is it about human nature that makes people believe that the weirder the design, the better it must be? And that "breakthrough" technology is the best technology?

Re: [RE-wrenches] 100 Foot Skystream tower

2010-08-01 Thread Roy Butler
mpty tower and the final raising with the cherry on top. Having a side spotter on these towers is invaluable! The trick of course is knowing all the unknowns before hand ;-) Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer PA Sunsh

Re: [RE-wrenches] Grundfos SQ Flex Float Switch

2010-08-23 Thread Roy Butler
part number A21802. Be sure to ground the traveler wire inside the CU200 and bury the cable if possible. FYI...our longest run is 7,000 feet. Been installed for 8 years and working fine on a Grundfos pump. Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligib

Re: [RE-wrenches] deadly fall off of roof

2010-09-25 Thread Roy Butler
ations industry, Verizon and OSHA. The fact that this video was first posted on a so called legitimate training website makes it all the more disturbing. But it is impressive. Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer

Re: [RE-wrenches] Grundfos

2010-11-08 Thread Roy Butler
greta pump systems but hopefully they have improved. I'm more than ready to try a pump line from a company that's responsive to factory defects and feedback from the field. Everything that Grundfos is not.   Grundfosare you listening? Hello.? Roy But

Re: [RE-wrenches] Grundfos

2010-11-08 Thread Roy Butler
calling for water. To be sure, pull one of the float wires out of its hold down tab and make it call for water. Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer PA Sunshine Program Approved PV Installer Four Winds Renewable Energy, LLC 8902 Route

Re: [RE-wrenches] Outback Mate Controller Issues

2010-12-09 Thread Roy Butler
I'm seeing a commonality here2 years. Because I've also had this issue.2-3 years into the Mate service life. How long do those coin batteries last in the Mates and could that even be an issue? Roy Butler NABCEP Certified Solar PV Installer® NYSERDA e

Re: [RE-wrenches] Dankoff Flowlight pumps

2011-01-13 Thread Roy Butler
Chad, Try Matt Leimbach Dankoff Pumps m...@dankoff-pumps.com ord...@dankoff-pumps.com (505)471-3469 Matt treated me really well! Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer PA Sunshine Program Approve

Re: [RE-wrenches] Electro-calc calculator

2011-02-03 Thread Roy Butler
Hi Allan, Here's the link...it's $39.95. http://www.calculated.com/prd318/ElectriCalc+Pro+NEC+2005+2008+and+2011+Upgrade+Kit.html Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer PA Sunshine Progr

Re: [RE-wrenches] (no subject)

2011-02-17 Thread Roy Butler
ave 3 of the 300 watt SureSines in use, 2 at unattended, unheated sites. All doing well! Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer PA Sunshine Program Approved PV Installer Four Winds Renewable Energy, LLC 8902 Route 46 Arkport, NY 1480

Re: [RE-wrenches] Quick Cote troubles

2011-02-22 Thread Roy Butler
u say you've never seen this yourself? I wonder if the formulation has been changed recently? Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer PA Sunshine Program Approved PV Installer Four Winds Renewable Energy, LLC 8902 Route

Re: [RE-wrenches] Slow clocks

2011-04-06 Thread Roy Butler
gh the bio interface used for winding the clock doesn't always work as it should ;-) It's not a clock problem when I don't get somewhere on time. Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer PA Sunshine Program Approved PV I

Re: [RE-wrenches] Grundfos SQ Flex

2011-04-06 Thread Roy Butler
x27;m embarrassed to include them in the customer's document package...they're all pictures and no textsigh Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer PA Sunshine Program Approved PV Installer Four Winds Renewable Energy, LLC 8902

Re: [RE-wrenches] Air conditioning for batteries in high temperature climate

2011-04-22 Thread Roy Butler
other AC units that appeared on his house the following week. But that's another story altogether! Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer PA Sunshine Program Approved PV Installer Four Winds Renewable Energy, LLC 8902 Route 46 Arkport

Re: [RE-wrenches] Air conditioning for batteries in high temperature climate

2011-04-22 Thread Roy Butler
'buy back' 20 kilowatt hours of storage. He got me on that one! That reasoning didn't work on the 6 other AC units that appeared on his house the following week. But that's another story altogether! Roy Butler

Re: [RE-wrenches] National grid hertz adjustment

2011-06-26 Thread Roy Butler
I saw this as well, came over the AP news wire on Friday, June 24th. I've been trying to figure out what they hope to gain by allowing more frequency variation.puzzling at best! Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind

Re: [RE-wrenches] Jacobs Wincharger Book, 1978?

2011-08-25 Thread Roy Butler
rned I had used their lunch for a manure substitute.. It's back in print by the way, with updates I hear. But I like my original.I'm not letting mine go either ;-) Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV& wind installer Four Winds Renewable E

Re: [RE-wrenches] Instruction manual / User interface rant

2011-10-19 Thread Roy Butler
Larry, Too bad that Outback (Alpha Group) is now in the process of sending all inverter manufacturing to India.sigh Roy Butler NABCEP Certified Small Wind Installer® NABCEP Certified Solar PV Installer® NYSERDA eligible PV& wind installer Four Winds Renewable Energy, LLC 8902 R

Re: [RE-wrenches] Booster Pump/Slowpump information

2011-10-20 Thread Roy Butler
Thank you Allan, this is really good information. I have about 35 of these in the field at this time and I'll need this info soon, I'm sure! Roy Butler NABCEP Certified Small Wind Installer® NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind instal

Re: [RE-wrenches] DC-DC converter question

2017-12-19 Thread Roy Butler
FYI.It appears that Solar Converters may be out of business. Roy Butler Four Winds Renewable Energy, LLC 8902 Route 46, Arkport, NY 14807 607-324-9747 www.four-winds-energy.com Check out the 14th Annual Small Wind Conference A Gathering of Installers, Manufacturers, Dealers, & Distribu

[RE-wrenches] Enphase tech support

2018-06-13 Thread Roy Butler
Does anyone have contact information for Enphase Tech Support? Thanks in advance! -- Roy Butler Four Winds Renewable Energy, LLC 8902 Route 46, Arkport, NY 14807 607-324-9747 www.four-winds-energy.com Check out the Annual Small Wind Conference A Gathering of Installers, Manufacturers, Dealers

Re: [RE-wrenches] Bergey XL.1 HummmBuzzz

2019-09-30 Thread Roy Butler
g the sound. The reason you don't hear it when the turbine is unloaded is because no current is being induced in the alternator coils, so there's no resistance pushing against the rotor magnets. Unfortunately, there's nothing much to be done about it. R

Re: [RE-wrenches] Direct solar options for stock tank de icing

2020-02-10 Thread Roy Butler
Gary, Try these folks. They're based in Wisconsin and make almost everything in house.I'm sure they have something that can work for you. They know a lot about aeration and de-icing. US Solar Mounts https://www.ussolarmounts.us/ Roy Butler Four Winds Renewable Energy, LLC 890

Re: [RE-wrenches] Wind Turbine

2020-07-08 Thread Roy Butler
of us wind weanies moved to solar installations to help support our wind habit and decreased wind sales put many turbine manufacturers out of business. Anyway, best of luck on your search and if you find something and care to run it by me off list please do so! R

Re: [RE-wrenches] Wind Turbine

2020-07-09 Thread Roy Butler
Agreed! Kohilo and oh so many others were never real projects, only concepts in search of investors. There are NO viable vertical axis turbines (VAWTS) on the marketjust expensive lawn art. Roy Butler Four Winds Renewable Energy, LLC 8902 Route 46, Arkport, NY 14807

Re: [RE-wrenches] Cheap solar

2009-04-28 Thread Roy Butler
won't let you leave the site. Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Route 46 Arkport, NY 14807 607-324-9747 www.four-winds-energy.com Although no trees were killed in the sending of this message, a l

Re: [RE-wrenches] Chinese solar cells and modules and pricing

2009-06-09 Thread Roy Butler
Bob-O, This is why we love ya, man! You're not afraid to speak my mind.... Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Route 46 Arkport, NY 14807 607-324-9747 www.four-winds-energy.com Although no t

Re: [RE-wrenches] tax credits and repairs

2009-07-24 Thread Roy Butler
Repairs do not count...sorry Bob. But new grid-tie wind turbines absolutely do qualify for the 30% tax credit! Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Route 46 Arkport, NY 14807 607-324-9747 www.four-w

Re: [RE-wrenches] XW6048 parts problem

2009-08-05 Thread Roy Butler
nuals, small spare parts, enhanced customer support, etc. Hats and shirts I get for free from the other mfgrs! Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Route 46 Arkport, NY 14807 607-324-9747 www.four-winds-e

Re: [RE-wrenches] Helix Wind

2009-08-22 Thread Roy Butler
'll probably give it a try. Hasn't happened yet Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Route 46 Arkport, NY 14807 607-324-9747 www.four-winds-energy.com Although no trees were killed in the

Re: [RE-wrenches] FX2000 / Trojan battery question

2009-10-01 Thread Roy Butler
f new tech people at OB these days. Hmmmmmm Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer PA Sunshine Program Approved PV Installer Four Winds Renewable Energy, LLC 8902 Route 46 Arkport, NY 14807 607-324-9747 www.four-winds-energy.com Although no trees

Re: [RE-wrenches] Off-Grid Sizing Case

2009-12-10 Thread Roy Butler
as I hate running a generator on my off grid pv/wind system, it's a necessary evil where we live.and it's even worse where Bob lives! Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer PA Sunshine Program Approved PV Installer Four Winds Renewable Ene

Re: [RE-wrenches] Battery Automatic Watering

2009-12-12 Thread Roy Butler
id and most use the sprayer method with good results. BTW, this was a brand new sprayer, dedicated to distilled water and hidden away from my wife, who loves to grab what ever is available in my shop. And at least here in snow country, the sprayers are all on sale! Roy Butler NABCEP Certified Sol

Re: [RE-wrenches] Battery Automatic Watering

2009-12-12 Thread Roy Butler
Bob and Jay, That's where I keep mine, in the battery box. Also, I bought 2 others for general use so mine would be left alone. And I labeled mine with nasty warnings! I'm the only one that ventures into the scary battery zone, so no worries there! Roy Butler NABCEP Certifie

Re: [RE-wrenches] Outback Mate remote programming

2010-01-04 Thread Roy Butler
Kirk, It's as you suspect, that the programming resides in the FX computer board. The only programming that resides in the Mate is for the AGS and HBX. How about making him a "cheat sheet" and give him a live "how to" demo at your shop. He's gotta provide the bee

Re: [RE-wrenches] Pump choice - Grundfos or Lorentz; distributers of Lorentz

2010-03-08 Thread Roy Butler
undfos systems this spring. Maybe all will be goodness and light this time ;-) And Windy.really glad to see you back in the game for a bit. I've missed you my friend! Also very happy to have support for the many Dankoff pumps I have out there. All running very well. Roy Butler NABCEP

Re: [RE-wrenches] Et tu Honeywell?

2010-04-08 Thread Roy Butler
ut PV sold at Lowes, etc. Let the games begin.... Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer PA Sunshine Program Approved PV Installer Four Winds Renewable Energy, LLC 8902 Route 46 Arkport, NY 14807 607-324-9747 www.four-winds-energy.com Although no t

Re: [RE-wrenches] Entertec service manual

2010-04-12 Thread Roy Butler
Bob, We may have one here but I won't know until I dig through some stuff in the barn.stay tuned. Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer PA Sunshine Program Approved PV Installer Four Winds Renewable Energy, LLC 8902 Route 46 Arkport,

Re: [RE-wrenches] Lorentz Sub Pump

2010-04-22 Thread Roy Butler
I'm following this thread with great interest. If the Lorentz pump has indeed improved, I want to know all about it. Thanks for all the great info! Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV& wind installer PA Sunshine Program Approved PV Installer Four Winds Ren

Re: [RE-wrenches] Lorentz Sub Pump

2010-04-22 Thread Roy Butler
he Cu200 seemed to be the ticket. Thanks for the info! Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV& wind installer PA Sunshine Program Approved PV Installer Four Winds Renewable Energy, LLC 8902 Route 46 Arkport, NY 14807 607-324-9747 www.four-winds-energy.com Alth

Re: [RE-wrenches] Thermal isolation (and liner) for battery bank

2010-05-01 Thread Roy Butler
ere myself ;-) The nice thing is that this is available at most Lowes and Home Despot stores. A 4 x 8 sheet is usually around $34.00. One sheet will easily do an enclosure that holds 12- L16s. It cuts easily on the table saw and can be scored and snapped as well. Roy Butler NABCEP Certified Solar

Re: [RE-wrenches] Whats with Kyocera

2010-05-19 Thread Roy Butler
Dan, I had to resort to Yingli modules on several of my Regretta pump systems a while back and they're working just fine. Over all, they exceeded my (rather low) expectations. I can't speak for any changes in quality since 2006 though. Roy Butler NABCEP Certified Solar PV Installe

Re: [RE-wrenches] TED MONITORING

2010-05-21 Thread Roy Butler
underwhelmed by the Envi Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV& wind installer PA Sunshine Program Approved PV Installer Four Winds Renewable Energy, LLC 8902 Route 46 Arkport, NY 14807 607-324-9747 www.four-winds-energy.com Although no trees were killed in t

Re: [RE-wrenches] low cost DAS systems - Follow-up

2010-07-21 Thread Roy Butler
advertised. Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer PA Sunshine Program Approved PV Installer Four Winds Renewable Energy, LLC 8902 Route 46 Arkport, NY 14807 607-324-9747 www.four-winds-energy.com Although no trees were killed in the sending o

Re: [RE-wrenches] Electric fence, metal buildings, lightning protection systems

2013-12-06 Thread Roy Butler
00 volts on our farm fencer grounding conductorI have learned not to touch ithad to try it 2 or 3 times to be sure though ;-) Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Route 46, Arkport, NY

Re: [RE-wrenches] Charge Controller with Configurable Maximum Output Current

2014-01-03 Thread Roy Butler
Bob-O nailed it.couldn't agree with you more! The Classic is my first choice for an MPPT controller. Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Route 46, Arkport, NY 14807 607

Re: [RE-wrenches] Replacement for Whisper 500

2014-01-17 Thread Roy Butler
t's OK to tell him I said that Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Route 46, Arkport, NY 14807 607-324-9747 www.four-winds-energy.com Join us at the 10th Annual Small Wind Co

Re: [RE-wrenches] 72-cell modules

2014-01-31 Thread Roy Butler
dimensions are almost identical to the SX-170 and the bolt holes line up nicelyand they are a 72 cell module. FYIwe have no nearby warranty contractor so BP actually paid us to do the work.I hung a copy of the check on my office wall ;-) Roy Butler NABCEP

Re: [RE-wrenches] Midnite solar Charge controllers

2014-02-18 Thread Roy Butler
face issue..the customer is pressing buttons. Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Route 46, Arkport, NY 14807 607-324-9747 www.four-winds-energy.com Join us at the 10th Annual Small Win

Re: [RE-wrenches] Huge battery bank recommendation

2014-03-11 Thread Roy Butler
plenty of time for watering...especially if you wind up with 72 cells. Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer IREC Certified Master Trainer™ for Small Wind Installer Four Winds Renewable Energy, LLC 8902 Route 46, Arkport, NY 14807 607-324-

Re: [RE-wrenches] Hijacked Website

2014-04-30 Thread Roy Butler
hone Ext: Tech Fax: +1.6105601501 Tech Fax Ext: Tech Email: hostmas...@1and1.com Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer IREC Certified Master Trainer™ for Small Wind Installer Four Winds Renewable Energy, LLC 8902 Route 46, Arkport

Re: [RE-wrenches] Low flow high head pump

2014-05-07 Thread Roy Butler
I would recommend using a Grundfos SQ 120 or 240 volt AC pump on a timer. Because you mention using a conventional pump, I assume that there's AC power available? The SQ line is very efficient and has no surge at start up. And it's a lot less expensive than the SQF line of pumps.

Re: [RE-wrenches] Magnum and Pumps

2014-07-02 Thread Roy Butler
this load. Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer IREC Certified Master Trainer™ for Small Wind Installer Four Winds Renewable Energy, LLC 8902 Route 46, Arkport, NY 14807 607-324-9747 www.four-winds-energy.com Join us at the 10th Ann

Re: [RE-wrenches] Magnum and Pumps

2014-07-02 Thread Roy Butler
Sweetthanks for that info, I stand corrected! Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer IREC Certified Master Trainer™ for Small Wind Installer Four Winds Renewable Energy, LLC 8902 Route 46, Arkport, NY 14807 607-324-

Re: [RE-wrenches] Grid-tie inverter for wind generator

2014-09-04 Thread Roy Butler
st as hard to find as affordable 72 cell replacement modules ;-) Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer IREC Certified Master Trainer™ for Small Wind Installer Four Winds Renewable Energy, LLC 8902 Route 46, Arkport, NY 14807 607-324-9747

Re: [RE-wrenches] Thirsty batteries: Daily absorb cycles on top of grid powered float

2014-10-06 Thread Roy Butler
firmware version this goes back to but the current one (1849) has it. Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer IREC Certified Master Trainer™ for Small Wind Installer Four Winds Renewable Energy, LLC 8902 Route 46, Arkport, NY 14807 607-324-

Re: [RE-wrenches] These Wind Turbines Generate Energy Without any Blades | Digital Trends

2015-06-02 Thread Roy Butler
Larry, Another concept that will likely not pan out. And like most VAWTs, that poor alternator shaft is the Achilles heel. As for further comments, if I proceed with mine, Michael will ban me for life! Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer

Re: [RE-wrenches] remember the pirate solar inverter?

2015-09-17 Thread Roy Butler
Was that the OK4U? Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Route 46, Arkport, NY 14807 607-324-9747 www.four-winds-energy.com Although no trees were killed in the sending of this message, a l

Re: [RE-wrenches] Batteries

2015-12-12 Thread Roy Butler
Dan, We've been using the garden sprayer method for the last 14 years and it works great! Be sure to buy a sprayer with a plastic wand..the brass wands can create a bit too much excitement. Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eli

Re: [RE-wrenches] Inverter/AC pump compatibility question

2016-04-26 Thread Roy Butler
Allan, I have several customers running the Grundfos SQE series on their modified square wave inverters. To be clear, those most recent was about 5 years ago, so perhaps there's been a design change since then. Roy Butler NABCEP Certified Solar PV Insta

Re: [RE-wrenches] time delay relay

2016-04-27 Thread Roy Butler
One you may want to look at is the Peltec 191 multifunction time relay. It's AC/DC 12-240 volts. http://peltectimers.com/ Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Route 46, Ar

Re: [RE-wrenches] Whisper 100 parts?

2016-07-29 Thread Roy Butler
Last I knew, Luminous sold the Whisper line to a Japanese company and since then, Whispers and parts have not been available. Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Route 46, Ark

Re: [RE-wrenches] Whisper 100 parts?

2016-07-29 Thread Roy Butler
also a source for parts and expertise. 519-955-1243 for Chris 541-388-3637 or 541-633-5760 for Mike Ridden Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Route 46, Arkport, NY 14807 607

Re: [RE-wrenches] PV Recombiner

2016-10-12 Thread Roy Butler
Drake, That's funny, William and I were having that discussion earlier today about those old DC enclosures. There was no need to sign your work because you left plenty of DNA behind for identification.. Roy Butler NABCEP Certified Solar PV Installer® NY

Re: [RE-wrenches] Battery Transport

2017-05-24 Thread Roy Butler
securing of the load, obeying traffic laws, etc. is sufficient. Roy Butler NABCEP Certified Solar PV Installer® Four Winds Renewable Energy, LLC 8902 Route 46, Arkport, NY 14807 607-324-9747 www.four-winds-energy.com Check out the Annual Small Wind Conference A Gathering of Installers, Ma

Re: [RE-wrenches] battery venting

2011-12-31 Thread Roy Butler
otice when they fail. Yes, that's another great argument for regular inspections. I have been using 3" vent pipe with a minimum 60 cfm, brushless, sealed motor vent fan, mounted so that it pulls the gases from the box and up the pipe. Roy Butler NABCEP Certified Small Wind In

Re: [RE-wrenches] NABCEP Sales

2012-01-29 Thread Roy Butler
x27;s a really handy document. Roy Butler NABCEP Certified Small Wind Installer® NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Route 46, Arkport, NY 14807 607-324-9747 www.four-winds-energy.com Join us at the 8th Annual S

Re: [RE-wrenches] Community says farewell to solar pioneer Gottlieb - Brattleboro Reformer

2012-02-24 Thread Roy Butler
Dan, Thanks for posting. I had the privilege of knowing Richard for about 15 years. I will miss him and our talks every summer at the Vermont Solarfest.he was one of the good guys! Roy Butler NABCEP Certified Small Wind Installer® NABCEP Certified Solar PV Installer® NYSERDA eligible PV

Re: [RE-wrenches] low head/low cost solar pump

2012-02-24 Thread Roy Butler
Mac, Sounds like the Shurflo 2088 series pump that Dan mentioned would fit the bill. We've used them PV direct with good results, just be sure to use a PV module with a Voc that's not too high for the pump. Roy Butler NABCEP Certified Small Wind

Re: [RE-wrenches] small wind generators

2012-04-03 Thread Roy Butler
many reliability and performance issues. What's the application for this? Roy Butler NABCEP Certified Small Wind Installer® NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Route 46, Arkport, NY 14807 607-324-9747 www.four

Re: [RE-wrenches] small wind generators

2012-04-03 Thread Roy Butler
be a solid company. Last I knew, they do not have a US distributor. Too bad because I want to test one here! FYI- I had the opportunity to dismantle and reassemble one in a course I taught in 2010. It's built like that proverbial outhouse. Roy Butler NABCEP Certified Small Wind Insta

Re: [RE-wrenches] small wind generators

2012-04-03 Thread Roy Butler
ce relationship. Interesting...thanks for the info.I'll start digging for more. Roy Butler NABCEP Certified Small Wind Installer® NABCEP Certified Solar PV Installer® NYSERDA eligible PV& wind installer Four Winds Renewable Energy, LLC 8902 Route 46, Arkport, NY 14807 607-

Re: [RE-wrenches] Kohler 8.5 RMY question

2012-04-04 Thread Roy Butler
Roy's quote: "Friends don't let friends buy a Generac" Roy Butler NABCEP Certified Small Wind Installer® NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Route 46, Arkport, NY 14807 607-

Re: [RE-wrenches] Kohler 8.5 RMY question - and Generac

2012-04-06 Thread Roy Butler
r that 8.5 RMY to be at the end of it's service life at 2,000 hours IF it has had regular service. Are there service records on site? Roy Butler NABCEP Certified Small Wind Installer® NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewab

Re: [RE-wrenches] SW master & slave

2012-05-25 Thread Roy Butler
Hi Mac, It's always the inverter that you powered up first. So you get to decide which one is the master. FYI- this can cause problems with customers that fiddle around with things and turn the inverters back on the wrong order.fun ;-) Roy B

Re: [RE-wrenches] 12V loads

2012-08-10 Thread Roy Butler
I like the Midnite MNDC series.low cost, with lots of room for future expansion. List price around $225 I like Maverick's suggestion of using a combiner box, even lower cost. Roy Butler NABCEP Certified Small Wind Installer® NABCEP Cert

Re: [RE-wrenches] RE-wrenches Digest, Vol 5, Issue 256

2012-08-18 Thread Roy Butler
light inside ;-) Roy Butler NABCEP Certified Small Wind Installer® NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Route 46, Arkport, NY 14807 607-324-9747 www.four-winds-energy.com Join us at the 9th Annual Small Wind Conference A Gat

Re: [RE-wrenches] Ni-Fe batteries

2012-09-26 Thread Roy Butler
! Roy Butler NABCEP Certified Small Wind Installer® NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Route 46, Arkport, NY 14807 607-324-9747 www.four-winds-energy.com Join us at the 9th Annual Small Wind Conferen

Re: [RE-wrenches] Kestrel Repair

2013-01-14 Thread Roy Butler
snag. Good luck! Roy Butler NABCEP Certified Small Wind Installer® NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Route 46, Arkport, NY 14807 607-324-9747 www.four-winds-energy.com Join us at the 9t

Re: [RE-wrenches] AHJ's & NABCEP cert.

2013-02-04 Thread Roy Butler
will not be a substitute for licensing. Roy Butler NABCEP Certified Small Wind Installer® NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Route 46, Arkport, NY 14807 607-324-9747 www.four-winds-energy.com Join us at the 9

Re: [RE-wrenches] Bergey XL1 and the Classic controller

2013-02-16 Thread Roy Butler
SWWP unit) It sure beats the good old "EZ-Fire" controller.so far, so good! Roy Butler NABCEP

Re: [RE-wrenches] Fw: Anyone recognize this turbine?

2013-02-24 Thread Roy Butler
This is a Wind Baron, a Windseeker knock off. It originally had 3 blades and didn't really produce any energy. Looks like someone assumed that doubling the amount of blades would double that non-existent energy ;-) Roy Butler NABCEP Certified Small Wind Installer® NABCEP Certified Sol

Re: [RE-wrenches] Fw: Anyone recognize this turbine?

2013-02-24 Thread Roy Butler
The Lakota is a knock off of the Wind Baron knockoff of the Windseekerbut it was still a 3 bladed turbine. Someone had some fun with it ;-) I bet it governs at much lower wind speeds than it was designed for Roy Butler

Re: [RE-wrenches] Conductor Sizing for Supply Side Connection

2013-03-01 Thread Roy Butler
the panel label but that seems to be the exception, not the rule.   Roy Butler NABCEP Certified Small Wind Installer® NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renew

Re: [RE-wrenches] Whisper Parts

2013-04-05 Thread Roy Butler
small wind continues ;-) Roy Butler NABCEP Certified Small Wind Installer® NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Route 46, Arkport, NY 14807 607-324-9747 www.four-w

Re: [RE-wrenches] BZ Products Charge Controllers

2013-04-10 Thread Roy Butler
came out and they may be much more robust now. And you are correct, they do fill a current and price niche! Roy Butler NABCEP Certified Small Wind Inst

Re: [RE-wrenches] outback fx series inverters

2013-04-13 Thread Roy Butler
se.unfortunately, with psychosomatic symptoms manifesting in those affected. Roy Butler NABCEP Certified Small Wind Installer® NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Route 46, Arkport, NY 1480

Re: [RE-wrenches] CU 200 error

2013-04-27 Thread Roy Butler
pump wiring. This is my experienceI'm curious to see what others say. Good luck! Roy Butler NABCEP Certified Small Wind Installer® NABCEP Certifi

Re: [RE-wrenches] Wasps

2013-05-06 Thread Roy Butler
Chris is absolutely right, dish detergent really does work. And Dawn is about the best brand to use. Roy Butler NABCEP Certified Small Wind Installer® NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy,

Re: [RE-wrenches] Lorentz Pumps

2013-05-19 Thread Roy Butler
pump line. Roy Butler NABCEP Certified Small Wind Installer® NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Route 46, Arkport, NY 14807 607-324-9747 www.four-winds-energy.com Join us at the 9th An

Re: [RE-wrenches] outback fx service work

2013-06-12 Thread Roy Butler
advicetake it off the wall and do not forget your grounded wrist strap! Roy Butler NABCEP Certified Small Wind Installer® NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Rout

Re: [RE-wrenches] AC dump loads

2008-07-21 Thread Roy Butler
Hi guys, Just a heads up.John Berdner is no longer with SMA-America. He's with GroSolar now...... Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Route 46 Arkport, NY 14807 607-324-9747 www.four-winds-e

Re: [RE-wrenches] Wireless control of off-grid pumps

2008-09-03 Thread Roy Butler
14,000 feet for one system (runs fine...for now) Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Route 46 Arkport, NY 14807 607-324-9747 www.four-winds-energy.com Although no trees were killed in the sending of this messa

Re: [RE-wrenches] Wireless control of off-grid pumps

2008-09-03 Thread Roy Butler
f use. I'll have to look into those a bit more. Thanks for the info! Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Route 46 Arkport, NY 14807 607-324-9747 www.four-winds-energy.com Although no trees were killed

Re: [RE-wrenches] NABCEP succumbs to IBEW pressure?

2008-09-05 Thread Roy Butler
Glenn, ISBN 978-0-8269-1287-9 Available in several places now including Amazon.coma wonderful book! Wish this was around 'back in the day' when I was getting started Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewab

Re: [RE-wrenches] Enphase inverters

2008-11-10 Thread Roy Butler
Hi Dave, We're looking forward to installing our first 4 in about 2 weeks. I plan to give feedback on the project when we have some good data to pass along. It was good to seeya in VT again this year! Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind instal

Re: [RE-wrenches] Pt valves as overheat control

2008-11-11 Thread Roy Butler
uch better at PV and wind systems....hot water scares me! Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Route 46 Arkport, NY 14807 607-324-9747 www.four-winds-energy.com www.nationalsolarsupply.com Although no trees

Re: [RE-wrenches] Pt valves as overheat control

2008-11-11 Thread Roy Butler
s to work, so maybe the vinegar would have to be boiling! Matt Roy Butler wrote: Hi guys, I have been using the SS water loop in my Amish wood cookstove for my domestic hot water for 9 years now. My tank is a 40 gallon electric water heater (space saver unit) and is configur

Re: [RE-wrenches] Golden Genesis question

2008-11-23 Thread Roy Butler
modules by the looks of it! I was kinda hoping that I could get a discount on Coors beer when GG owned the company but alas, it was not to be. Roy Butler NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Route 46 Arkport, NY 1480

  1   2   >