Re: [RE-wrenches] 12V loads

[Roy Butler]

I like the Midnite MNDC series.....low cost, with lots of room for future expansion. List price around $225 I like Maverick's suggestion of using a combiner box, even lower cost. Roy Butler NABCEP Certified Small Wind Installer® NABCEP Certified Solar PV Installer® NYSERDA eligible PV & wind installer Four Winds Renewable Energy, LLC 8902 Route 46, Arkport, NY 14807 607-324-9747 www.four-winds-energy.com Join us at the 9th Annual Small Wind Conference A Gathering of Installers, Manufacturers, Dealers, & Distributors June 18 and 19, 2013 in Stevens Point, Wisconsin www.smallwindconference.com Although no trees were killed in the sending of this message, a large number of electrons were terribly inconvenienced. On 8/10/2012 10:05 AM, Jay Peltz wrote: I'd try using one of midnite's many boxes Jay Peltz power Sent from my iPhone On Aug 10, 2012, at 6:55 AM, Jason Szumlanski <ja...@fafcosolar.com> wrote: I'm not sure about the price, but what about using the DC enclosure from an Outback Flexware system? Lots of space for branch circuit breakers, plus a big DC disconnect. Jason Szumlanski Fafco Solar On Thu, Aug 9, 2012 at 5:05 PM, Jesse Dahl <dahlso...@gmail.com> wrote: Hello, I've been looking at a lot of hunting shacks, fish houses and other 12V loads setups and was wondering how people go about setting these up? What are people using for load termination, fusing? .org _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org

_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org