Re: [RE-wrenches] Old & new Enphase communication issues

production from the consumption CT readings Cordially, Nick Soleil Enphase Energy Senior Product Manager (707) 763-4784 x7267 // office (707) 321-2937 // cell Powering What’s Next™ | The Enphase Energy Management System<https://enphase.com/en-us/products-and-services/envoy> NABCEP

[RE-wrenches] RE-wrenches Digest, Vol 2, Issue 818

Aloha Solar Bozos: I haven't posted here in ages, and I hope I am cutting out the appropriate stuff? Probably not, but I will give it a try. I want to reply to Topic 3 regarding backfeeding an off-grid inverter with a grid-tied inverter. In 2004, I back-fed a SWR-2500U into an Outback F

Re: [RE-wrenches] RE-wrenches Digest, Vol 2, Issue 1000

From: "re-wrenches-requ...@lists.re-wrenches.org" To: re-wrenches@lists.re-wrenches.org Sent: Thursday, October 1, 2009 10:37:47 AM Subject: RE-wrenches Digest, Vol 2, Issue 1000 Send RE-wrenches mailing list submissions to re-wrenches@lists.re-wrenches.or

Re: [RE-wrenches] Wire Management--was RE: Rooftop wiring

Aloha Solar Bozos It's hard not to be upset, but I don't believe that racking manufacturers should be held accountable for this alone. I have always felt that the module manufacturers should be responsible for wire management. Why are the module frames not constructed with channels in the

Re: [RE-wrenches] Battery Racks

I installed a battery bank with 72- 225 lbs C&D Technology 1770 AHr Batteries once. We installed 8100 lbs at ground level and 8100 lbs on a second tier. We used custom welded battery cabinets, engineered for the load, and braced to the structure. We used custom battery trays with an acid resi

Re: [RE-wrenches] AC Coupled Re-visited

not refer to it as AC coupled. Later, the Sunny Island came out and did this in a more sophisticated way. I would recommend using the Sunny Island for AC coupled systems, but it will cost twice as much. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petalu

Re: [RE-wrenches] XW (was Outback "F"ware)

any other off-grid inverter system, and amazingly, the customer can understand the controller! Which makes all the difference to me. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 707-789-9537 Fax:707-769-9037

[RE-wrenches] Stainless steel, self-tapping grounding screws

allow them without the letter of authorization from BP Solar. I have contacted BP a couple times, requesting that they provide a letter to WEEB, and I heard, "it's complicated." I guess so. Maybe I will bolt the Ilsco lug through a threaded hole. Nick Soleil Project Manager Ad

Re: [RE-wrenches] IMO - SS Tek Crews

I agree with that Jim: I wouldn't do it without the 32 threads per inch, but have decided to bolt the lugs to the modules (with a star washer, of course.) It is only for this one job. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953

Re: [RE-wrenches] Shade Mitigating DC Device Application

HI Matt: The way I deal with it is normally to put the shaded modules onto one string. This morning, I finalled an inspection on a system with two strings of 12- BP SX-3200Bs (200 w) to 2- GT-3.3 inverters. We arranged one string in the morning shade, and one out of it. Inverter 1 was pro

[RE-wrenches] Costs of Solar Permits

to the jurisdictions besides the incomes from the permit fees, such as; city taxes collected, environmental benefits, reliable electric system, etc. .. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 707-789-9537 Fax

Re: [RE-wrenches] SW4024 compatibility question

nects, can not be stacked with earlier units. I bet Nick Klein, in tech support at Xantrex could get you the software? Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 707-789-9537 Fax:70

Re: [RE-wrenches] OB Battery Charging

arrived to find a set of batteries that was visibly melting down. Do your customer's find the Mate controller to be very counter-intuitive and challenging to utilize. I do, even after installing 50+. I think I've given up on OB now, though. No Dual AC inputs? Nick Soleil Proj

Re: [RE-wrenches] Evergreen to China, What is American made?

BP Solar stands for British Petroleum. "Yes, it is the same company as the oil company." Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 707-789-9537 Fax:707-769-9037 ___

Re: [RE-wrenches] Recycling and Disposing of Modules

Hi Randy: You bring up a good point about recycling. I have replaced a few hundred modules under warranty, and they are starting to back up. I don't really know a good way to dispose of them? Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petalum

Re: [RE-wrenches] Enphase track record

some customer calls, but the customers are normally accepting, because it is so impressive, it is easy to accept the occasional glitch. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 707-789-9537 Fax:707-769

Re: [RE-wrenches] Megometers

conductors commonly have voltage readings of 260V+ to ground, but it dissipates with the meter connected. Is this induced voltage caused by the leakage current that the manufacturer called 'normal?' Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Pe

[RE-wrenches] Geocel 2300

Aloha wrenches: Do you have experience with Geocel 2300? What do you think of using it for roofing penetrations and roof flashings? Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 707-789-9537 Fax:707

Re: [RE-wrenches] Solar System Certification

installations, then they have to pay us for our experience. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 707-789-9537 Fax:707-769-9037 From: Brian White To: RE-wrenches ; RE

Re: [RE-wrenches] Battery Automatic Watering

I have provided battery watering system of this type before. Some commercial systems are available like you discussed, but include water filtration, too; which is attached to a water spicket. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA

Re: [RE-wrenches] Sharp Sunvista 3500

, but required reconfiguring the strings (from three strings of 7, 7, and 6 to two strings of 10.) I don't know what that error code means, but it probably means the inverter is failed. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953

Re: [RE-wrenches] Water Pipes as Grounding Electrodes

wired house? It is not so uncommon for a person to become the shortest path to ground. It is good practice to bond the water system to the grounding electrode or other grounding conductor. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell

Re: [RE-wrenches] EnPhase/Racking Best Fit

t not ideal. I second the other comments about the clips, too. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 707-789-9537 Fax:707-769-9037 From: Dana Brandt To: RE-wre

Re: [RE-wrenches] anti islanding?

s, at least theoretically. Should I continue to be concerned? Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 707-789-9537 Fax:707-769-9037 From: Darryl Thayer To: RE-wre

Re: [RE-wrenches] Generators and Grid-tie Systems

quot; but must instead be in "manual." The customer must be clear that the solar breakers must be turned off before the generator is turned on. This probably should include signage which makes this clear to the customer. Nick Soleil Project Manager Advanced Alternative Energy Sol

Re: [RE-wrenches] Generators and Grid-tie Systems

ny in 'manual' start mode. I feed good about the situation, will disable the auto-start system, and will provide competent labelling. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 707

Re: [RE-wrenches] Irradiance data

. I actually ordered multiple sets of these for friends and co-workers. I don't know if that deal is still around. The same irradiance data has been published in Ed Mazaria's 'Passive Solar Energy Book.' From the 70s. Nick Soleil Project Manager Advanced Alternative E

Re: [RE-wrenches] acre/MW

In the past, I have needed 6 acre/MW for poly arrays Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 707-789-9537 Fax:707-769-9037 From: Scott McCalmont To: RE-wrenches

Re: [RE-wrenches] Missing MC4 Connectors?

MultiContact told me that the equipment used to manufacture the Gen4 MC connectors in Switzerland is broken, and they are ~16 weeks backlogged. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 707-789-9537 Fax

Re: [RE-wrenches] Kohler Generator Issues

s do offer that now. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 707-789-9537 Fax:707-769-9037 From: Jeff Yago To: RE-wrenches Sent: Mon, March 29, 2010 7:53:18 AM Subjec

Re: [RE-wrenches] Supply Side Tap Overcurrent Protection

I have a project were I may need to do a line-side tap, but was wondering if we can provide a load analysis as an exception, to show that the house will never use more than the buss-bars are rated for. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma

Re: [RE-wrenches] Supply Side Tap Overcurrent Protection

that a load analysis may be accepted instead. The loads of the house will never use more than 100 Amps. I am wondering if any codes or white papers detail that option. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937

Re: [RE-wrenches] Supply Side Tap Overcurrent Protection

eption. I have a firm understanding of my other options. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 707-789-9537 Fax:707-769-9037 From: Eric Andrews To: RE-wrenches

Re: [RE-wrenches] DC wire sizing

The cost would have been over 100K, which was cost prohibitive. However, by running DC wiring, and utilzing AL, we were able to maintain 1.5 VDC drop without being too expensive (yet still expensive.) Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petalum

Re: [RE-wrenches] Voltage degradation

I usually keep in mind that the modules will degrade by 10% However, if you are one of those wrenches promoting 3% DC Voltage Drops, maybe you should add some more. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office

Re: [RE-wrenches] DC wire sizing

t 1/4 the cost of your analysis. I would ask you to look closer at your next design, and consider designing at a lower voltage drop than 3%. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 707-789-9537 Fax:70

Re: [RE-wrenches] DC wire sizing

loss. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 707-789-9537 Fax:707-769-9037 From: Kent Osterberg To: RE-wrenches Sent: Mon, April 12, 2010 10:51:10 AM Subject: Re

Re: [RE-wrenches] Hans Petersen

le to find any press about this accident. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 707-789-9537 Fax:707-769-9037 From: Marco Mangelsdorf To: RE-wrenches Sent: Fri, Apr

Re: [RE-wrenches] BP SX 170B

shatter after the j-box connections overheated. I have seen many of these modules with scorched connections at the j-box, but only 1/2 or so will result in cracked glass. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office

Re: [RE-wrenches] MC 4 connectors

Ive gotten a few replies from MC in Petaluma today, but they were all to make me revise my PO? I've never worked with a company that was so difficult and un-interested in my business. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953

Re: [RE-wrenches] GT 3.0 FAILURES

support is good. In my experience, it is not a big difference. I trust the newer GTs more. Most of my 3.0's have been upgraded by Xantrex to 3.3s, upon failure. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 70

Re: [RE-wrenches] GT 3.0 FAILURES

I was at an older job this morning (4yrs) with 2 failed GT-3.0. We quickly got two RMAs from Schneider/Xantrex. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 707-789-9537 Fax:707-769-9037

Re: [RE-wrenches] SMA6000U and GT 3.0 FAILURES

able to work through the bugs that have plagued the GTs. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 707-789-9537 Fax:707-769-9037 From: i2p To: RE-wrenches Sent: Thu

Re: [RE-wrenches] AC wiring loss on micro-inverters

the size of the wire in their cables soon. Have you experienced issues with micro-inverters shutting off due to high AC voltages? Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 707-789-9537

Re: [RE-wrenches] AC wiring loss on micro-inverters

Did you notice that in my calculation I divided the total amperage by 2 to get the average ampacity across the string. This seems to be the best way to deal with that. Otherwise the loss would have been over 2.8% Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box

Re: [RE-wrenches] Warranty replacement (was Astopower 120 failure)

Kyocera replaced 296 KC-120s for our customer and paid us more than 1$ per watt for the labor to swap em' Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 707-789-9537 Fax:707-769

Re: [RE-wrenches] AC wiring loss on micro-inverters

modules strings) per and then combine them at the Soladeck/Combiner Box. Does Enphase offer the center tap cable on its price lists? Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 707-789-9537 Fax:707-769-9037

Re: [RE-wrenches] electrical permit requirements

tomer. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 707-789-9537 Fax:707-769-9037 From: William Miller To: jry...@netscape.com; RE-wrenches Sent: Tue, June 15, 2010 3:43:

Re: [RE-wrenches] electrical permit requirements

et us have the permit over the counter at a reasonable fee. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 707-789-9537 Fax:707-769-9037 From: William Miller To: RE-wre

Re: [RE-wrenches] SunPower modules

What do you think of the SunPower modules? They seem to be a top quality product, and they really promote the idea that they produce the most power per DC watt. What have your side by side tests found? Why won't they warranty their product with Enphase? Thanks Sent from my iPhone On Jun 17,

Re: [RE-wrenches] For Big Bank Off Grid System Connoisseurs

replace the bad cell for now. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 707-789-9537 Fax:707-769-9037 From: Mark Frye To: RE-wrenches Sent: Mon, June 21, 2010 8:21:06 PM

Re: [RE-wrenches] Flashed Footing Requirements

xible installation methods, including caulked footings. Our industry has come a long way from the early days of racking on slotted angle iron with steel L-brackets for feet, but those experiences tend to give me confidence in continuing to use caulked footings. Nick Soleil Project Manager Adv

Re: [RE-wrenches] Flashed Footing Requirements

Also, the QuickMount is $10 more than the FastJack with Oatey method. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 707-789-9537 Fax:707-769-9037 From: Kirpal Khalsa T

Re: [RE-wrenches] Flashed Footing Requirements

Aloha Wrenches: Do you add a rubber boot to the top of the Oatey Flashings. Do you think the Oatey Solar Flashings, which utilize a rubber boot, will stand up to weathering below an array. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA

Re: [RE-wrenches] Interstate UL-16 HC problem

Really Ray: Almost all of the L-16s I've installed or serviced, mostly Trojans, lasted 7-13 years. I have only seen one one bank of L-16s die in 5 years. On the other other hand, I have seen golf cart batts, such as the T-105s last 3-7 years, with only a few making it any longer.

Re: [RE-wrenches] BP SX170B's

The BP-3175B are available now, which are pretty similar to the SX-170s and use the same frame. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 707-789-9537 Fax:707-769-9037

Re: [RE-wrenches] attaching to roof decking - Foam Insulation Install

d nail pattern. The calculations would be affected by the spacing between the roof and the modules, and the amount of air that can get under the modules. If the panels are flush to the roof, then there is little or no uplift. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO

Re: [RE-wrenches] Picking a Quality Chinese PV Module

I have been curious to hear about folks experience with Trina, which makes a very high efficiency module (~19%) I am also intrigued by Yingli, partly because of all their advertising during the FIFA World Cup, speaking of marketing. Nick Soleil Project Manager Advanced Alternative Energy

Re: [RE-wrenches] #10 THWN-2

I have specified THWN-2 for years, but occasionally will not be able to source it! Sent from my iPhone On Jul 23, 2010, at 11:37 AM, "Peter Parrish" wrote: > We went through a similar problem with some beach communities here in SoCal. > Because of the high humidity (all winter and summer mor

Re: [RE-wrenches] Unknown rail.

.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > > -- Cordially, *Nick Soleil* *Field Applications Engineer * *Enphase Energy*

Re: [RE-wrenches] GEC sizing for a high amp, low voltage PV system with microinverters

erious threaded hole…. > > ** ** > > Bill. > > ** ** > > *From:* re-wrenches-boun...@lists.re-wrenches.org [mailto: > re-wrenches-boun...@lists.re-wrenches.org] *On Behalf Of *Nick Soleil > *Sent:* Wednesday, September 18, 2013 10:19 AM > *To:* RE-wrenches &

Re: [RE-wrenches] GEC sizing for a high amp, low voltage PV system with microinverters

___ > > List sponsored by Home Power magazine > > ** ** > > List Address: RE-wrenches@lists.re-wrenches.org > > ** ** > > Change email address & settings: > > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org*

Re: [RE-wrenches] Using legacy modules on micro-inverters

Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > L

Re: [RE-wrenches] Using legacy modules on micro-inverters

), then the two > SP75s are compatible. What is your determination? > > ** ** > > Thanks, > > ** ** > > William > > ** ** > > ** ** > > ** ** > > *From:* re-wrenches-boun...@lists.re-wrenches.org [mailto: > re-wrenches-boun...@lists.re-w

Re: [RE-wrenches] Microinverters with S-5-PV

tp://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > > -- Cordially, *Nick Soleil* *Field Applications Engineer* *Enphase Ener

Re: [RE-wrenches] Enphase monitoring picking up other systems

tm > > Check out participant bios:www.members.re-wrenches.org > > > > ___ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Change email address & settings: >

Re: [RE-wrenches] Enphase monitoring picking up other systems

ist sponsored by Home Power magazine >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Change email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://lists.re-wrench

Re: [RE-wrenches] Solar World shattered module

gt; Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > >

Re: [RE-wrenches] 2014 NEC

ts.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > &

Re: [RE-wrenches] AC Coupled + CC Grid Feed Input

/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > >

Re: [RE-wrenches] Modules over vents

>>>>>> Thanks. >> >>>>>> >> >>>>>> >> >>>>>> Bruce >> >>>>>> >> >>>> >> >>>> >> >>>> >> >>>> _

Re: [RE-wrenches] Metering

t; www.members.re-wrenches.org > > > > > -- > > ___ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: >

Re: [RE-wrenches] 300W 72 cell micro inverters

* > ___ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Arch

Re: [RE-wrenches] meggering module-level electronics

hes.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > > -- Cor

Re: [RE-wrenches] large array on 200 amp service

One trick is to install an external meter base, so that you can use the original meter compartment for your supply side connection. You'll also need jumper straps and a cover for the original meter base. Nick Soleil Enphase Energy Cell: 707-321-2937 > On Sep 25, 2015, at 10:31 A

Re: [RE-wrenches] Pg&e meter reading

ored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches

Re: [RE-wrenches] Can anyone identify this mounting system and module

& settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update partici

Re: [RE-wrenches] Enphase M190 current limiting

ns.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> www

Re: [RE-wrenches] Optimal 200 or 225 Amp Square D MSP All-in-One meter for CT Clamps

-wrenches@lists.re-wrenches.org/maillist.html >>> >>> List rules & etiquette: >>> www.re-wrenches.org/etiquette.htm >>> >>> Check out or update participant bios: >>> www.members.re-wrenches.org >>> >>> >>> >> >&

Re: [RE-wrenches] Enphase Support Non-Responsive

service notes on your cases. We recently launched the self-service portal, and hope it will be of use to you all. It can be accessed here: https://service.enphaseenergy.com/users/sign_in You will need to use your Enlighten user ID and credentials to access the portal. Cordially, Nick Soleil

Re: [RE-wrenches] Pass through/transition box for Enphase

, and the stock of fine strand cable should be largely flushed out of distribution channels at this time. Our manufacturing and distribution channels are set up to so that the product that comes in first goes out first, so hopefully you don't have to deal with this issue again. Cordially,

Re: [RE-wrenches] After market SMA TL inverter shade covers

es/default/files/M215_Installation_Manual_NA.pdf Cordially, Nick Soleil Enphase Energy | Field Applications Engineer (707) 763-4784 x7267 // office (707) 321-2937 // cell [Enphase_esig_logo6.jpg]<https://enphase.com/> Energy Evolved<http://enphase.com> ™ Powering What’s Next

Re: [RE-wrenches] Battery Transport

er is ultimately responsible for verifying that the employee is capable of safely transporting these materials, but no specific certification is required. Cordially, Nick Soleil Enphase Energy | Field Applications Engineer (707) 763-4784 x7267 // office (707) 321-2937 // cell [Enphase_esig_logo

Re: [RE-wrenches] AC Coupled Enphase

You can use a one-pole relay. We show one-pole switching in our zero-export, self-consumption doc for PEL applications. Nick Soleil Field Application Engineer Enphase Energy Cell: 707-321-2937 On Aug 28, 2017, at 6:44 AM, Drake mailto:drake.chamber...@redwoodalliance.org>> wrote:

Re: [RE-wrenches] AC Coupled Enphase

The one-pole relay will work for de-energizing any of the Enphase microinverters. Nick Soleil Field Application Engineer Enphase Energy Cell: 707-321-2937 On Aug 28, 2017, at 6:03 PM, Drake mailto:drake.chamber...@redwoodalliance.org>> wrote: Hi Nick, I should mention that the inv

Re: [RE-wrenches] Enphase and Smart? phone

Hi Bill, Give me a call and we can discuss. I wouldn't try to configure the system without access to the Installer Toolkit app. If you don't have a smart phone, then you can use an ITouch or IPad to perform the system configuration. Cordially, Nick Soleil Enphase Energy | Produ

Re: [RE-wrenches] Enphase and Smart? phone

ion to the router even if the WiFi password is later changed. Cordially, Nick Soleil Enphase Energy | Product Manager, Envoy and IQ Accessories (707) 763-4784 x7267 // office (707) 321-2937 // cell [Enphase_esig_logo6.jpg]<https://enphase.com/> Energy Evolved<http://enphase.com

Re: [RE-wrenches] Solar World 2.0 frames

__ >> List sponsored by Home Power magazine >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Options & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://lists.re-wrenches.org/p

Re: [RE-wrenches] Enphase grid tie question

>> Options & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> www.r

Re: [RE-wrenches] Enphase/Conergy Suntop and Weeb

. What is more important is using a 1-1/2" fender washer to spread out the clamping force applied to the lid of the M215 microinverters. Feel free to reach out to me directly if you have any questions or concerns (my contact info is below.) Nick Soleil On Tue, Jul 31, 2012 at 6:12 PM, benn

Re: [RE-wrenches] Enphase M210-84-208-S12 Inverters Available?

positively grounded. Nick Soleil On Mon, Aug 13, 2012 at 5:16 AM, Dave Click wrote: > Enphase already positive-grounds the module: > > http://enphase.com/support/**installation-wiring/<http://enphase.com/support/installation-wiring/> > Q: The Enphase Microinverter manual states

Re: [RE-wrenches] AET Rayport array #1

oinverters are available with, it does provide a list of solutions that have been validated by our mechanical and field application engineers. Racking companies that would like to be included on this list can reach out to me directly by email. -- Cordially, *Nick Soleil* *Field Application

Re: [RE-wrenches] Best practices for conduit penetration on roof

r the most current information. Nick Soleil, Enphase Energy On Sun, Nov 25, 2012 at 7:44 AM, Kent Osterberg wrote: > My understanding has been that the Soladeck has only been listed for DC > wiring. Perhaps they have a manufacturer rep on RE-wrenches that can > clarify. > > Kent

Re: [RE-wrenches] Barcode Scanners

ttings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: >

Re: [RE-wrenches] high insolation value and inverter undersizing

, or the employee, agent, or > representative responsible for delivering the e-mail to the intended > recipient, you are hereby notified that any dissemination, distribution, > copying, or other use of this e-mail is strictly prohibited. If you have > received this e-mail in error, pl

Re: [RE-wrenches] Enphase "AC Frequency out of Range"

ck out participant bios: > >> www.members.re-wrenches.org > >> > >> > > > > > > ___ > > List sponsored by Home Power magazine > > > > List Address: RE-wrenches@lists.re-wrenches.org > >

Re: [RE-wrenches] Hawaii Frequency Settings

mail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > > -- Cordially, *Nick Soleil* *Field Applications Engineer * *Enphase Energy* Mobile: (7

Re: [RE-wrenches] P1 micro performance

: > www.members.re-wrenches.org > > > > ___ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wren

Re: [RE-wrenches] Clipping

address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participan

Re: [RE-wrenches] P1 micro performance

> > > > As module outputs have been going up, Enphase has a vested interest in > continuing to move product with little regard for the harvestable energy > being essentially lost. Using larger micros that reduce or eliminate that > clipping is prima facie a good thing if

<    1   2   3   >