Aloha Wrenches:
I have been surprised how much equipment has been failing in and out of
warranty.
- I have recently been put in the unfortunate situation of
replacing Sunny Boys that have been dying just out of warranty
- I just placed the 50th dead BP module into my module graveyard.
- I have been replacing SMA and Xantrex inverters left and right
(three more dead inverters yesterday)
- Enphase communication issues. Recently, it has been taking 20-40
minutes to reach Enphase customer service
This is getting out of hand and taking too much of our staffs time.
Have any of you installed the new GT inverters that just came out?
They now have a new, larger disconnect enclosure at the bottom of the
inverter, and have the guts from the Square D HU-361-RB disconnect
inside, with the disconnect handle coming out of it. Perhaps Schneider
may be able to work through the bugs that have plagued the GTs.
Nick Soleil
Project Manager
Advanced Alternative Energy Solutions, LLC
PO Box 657
Petaluma, CA 94953
Cell: 707-321-2937
Office: 707-789-9537
Fax: 707-769-9037
________________________________
From: i2p <[email protected]>
To: RE-wrenches <[email protected]>
Sent: Thu, June 10, 2010 4:45:51 PM
Subject: Re: [RE-wrenches] GT 3.0 FAILURES
On Jun 9, 2010, at 10:47:43 AM, "August Goers" <[email protected]> wrote:
maybe Xantrex has fixed it by now?
Unlikely, since I continue to replace several sites a 2nd and in one case three
times.
Don L
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
