there's a nice utility named ifile, which uses word-frequencies to sort
messages into folders. ifile itself is very generic: it has no file-
locking interface and therefore can't be used directly.
it would be nice to use it with mutt. one can pipe a message into it and
tell it where it belongs
> Jason Helfman:
> I have this as my .qmail file:
> /home/deklown/Maildir/new/
the maildir is an object of it's own, and it's structure is taken care of
by the software. leave out that fg new/!
clemens
> Jason Helfman:
> I just installed Qmail last night and broke my Procmail, but I thought I
> had fixed it with setting up where Promail writes to...
had the exact same probs, also procmail complaining about every
write(2). but i needed email badly and dropped procmail until i regain
the specia
> Gottipati Aravind:
> and that works just fine. My question now is whats the purpose of that
> hostname variable if it does not work? am I doing it wrong or do I need
> to set some other variable too.. to get it to work?
whether you can forge your "from:" line or not depends on the mta.
sendma
> Lars Hecking:
> Do not ask about the difference between 1.2 and 1.2.1.
>
> Use 1.2.2.
but don't forget the patches...
clemens
> Jason Nealis:
> How do I get mutt to put my .sig at the top of my reply emails?
> It reads it in and it's always at the end of the reply..
this you have to do inside the editor when composing. mutt supports only
the standard, netiquette style.
clemens
> Sam Xie:
> read a mail, push the key, an error message says,
> "keys not bound. Press '?' for help."
this happened to me when switching over from command- line to x11 on a new
computer. try ^V in the shell command- line, it tells you what key-
sequence gets emmitted. control-V is for
> Mike Markowski:
> Notice that I now must put *two* slashes after "~mm". With only a
> single slash, I get this:
how in the world did you find out? i would never have had the idea to try
to put two slashes in there! now tell us: what made you do this? not the
marsians again
clemens
Nils Vogels wrote:
> I'm using gpg 1.0.0 with mutt to handle my PGP ... but for some reason I keep on
>getting "key not found" messages .. I dont think noone has their keys on keyservers
>nowadays, so I
must be doing something wrong ..
you probably need the rsa/idea extensions. search the co
Gerhard den Hollander wrote:
>
> * clemensF <[EMAIL PROTECTED]> (Mon, Jun 19, 2000 at 07:49:56PM +0200)
> >> Ronny Haryanto:
>
> >> I've converted my mailboxes to maildir once, it turned out to be
> >> slower than mbox, so I converted back to mbox
Dennis Robertson proclaimed on mutt-users that:
>Before I give up and retire hurt to netscape can anyone tell me in words
>of one syllable how to create mailboxes that work. I get the message
>>from mutt that every one of the "mailboxes" I have designated is not a
>mailbox, even though I can see
> Mrinal Kalakrishnan:
> No it's different. If you're in a console while X is running, the
> RunningX test will fail, because it actually tries to open the
> display. Whereas the $DISPLAY variable still exists, so "test -n
isn't there some other way (a unix way) for trying to open the x- display
> Mrinal Kalakrishnan:
> No it's different. If you're in a console while X is running, the
> RunningX test will fail, because it actually tries to open the
> display. Whereas the $DISPLAY variable still exists, so "test -n
> $DISPLAY" test passes. So if you're in a console, while X is running,
>
> Virginie [ ML ]:
> defaults mda "formail -ds procmail"
one can save one exec and much complexity using:
mda "/usr/local/bin/procmail -t -f-"
clemens
> Ronny Haryanto:
> I've converted my mailboxes to maildir once, it turned out to be
> slower than mbox, so I converted back to mbox now. Dunno about MH, but
> I'm guessing it's about the same speed as maildir since it resembles
> maildir.
are your files on a network?
clemens
> Gary Johnson:
> > ...so it can be tested if an X-server is running. What is this program
> > RunningX ? Is it an utility that comes with X (it is not on my
you might consider just using standard "/usr/bin/test -n $DISPLAY". no
need for special programs, if you test the existence of the x- var
> Brett Coon:
> 1. Folder changes are really slow. My MH folders (directories)
> have thousands of messages, which undoubtedly is at least
> part of the problem. Would it be faster if I stored messages
> in mbox format? Is there anything else I can do to speed
> it up other th
> [EMAIL PROTECTED]:
> send-hook '~t linux-bruxelles' set editor="vi +set textwidth=72"
what about set editor="vi \"+set textwidth=72\""?
clemens
> John Poltorak:
> Where do users normally install the html version of mutt's manual?
usually /usr/local/share/doc/mutt/
clemens
> Walt Mankowski:
> in my .muttrc file. I recently converted this folder to a Maildir.
> Since then none of the new messages have a Lines: tag, so to mutt they
> all appear to have 0 lines.
the lines disappear in a maildir, but the size in bytes holds.
clemens
anyone ever tried to exploit the coarse resemblance between imap and the
classic structure in spool/news?
clemens
> Suresh Ramasubramanian:
> polling [EMAIL PROTECTED] is slow, to say the least.
> Brightmail pops mails from gmx (not the fastest available pop server),
> then filters it, then you pop mail from brightmail ...
that's correct, but primary concern is to keep spam away from my machine,
so there's
> Dirk Ruediger:
> This tags your mail and you can store it somewhere. The latter task can be
> better done with fetchmail/procmail!
btw: for a leafnode this combination is not the worst one can have, right?
i don't have a static-ip, and this is really just the basic leaf of the
tree, and to me
> Suresh Ramasubramanian:
> Can y'all help me? Rather silly of me, I know - but I sort of prefer the
> second format :)
which is deprecated.
clemens
> Nils Vogels:
> The problem isnt mutt, since mutt handles the .gz folders perfectly ..
> the problem is my mail delivery .. how do I tell procmail to add the
> mail in .gz format to the other mails ?
you can append gzipped files to gziped archives, i.e.
"gzip >archive.gz".
clemens
> Bob Bell:
> mutt -s 'the whole deal' [EMAIL PROTECTED] `for f in *.html;do echo -a $f;done`
might want to say "echo -- -a ..." there, in case echo(1) complains.
clemens
> Suresh Ramasubramanian:
> user foo with password bar mda "sed -e '1s/^\t/Received: /' | formail
>|/usr/bin/procmail -d "
or:
mda "/usr/local/bin/procmail -t -f-"
clemens
> Yip Weng:
> Some newbie rattle: I just migrated from Win2000 to Linux, and am using
> Mutt as substitute for my erstwhile mailer Forte Agent 1.8, to which
> threading is also a feature. I have found mutt to be outrageously
> flexible and powerful, and the text based screen is so much better for
> Nils Vogels:
> Does anyone know the default settings for FreeBSD 5.0 ?
didn't even know of a 5.0 current. but my brother's name's also ni[e]ls.
he opts for e, though.
clemens
> Gottipati Aravind:
> set folder=~/mail
> mailboxes ! `echo $folder/*`
did you really check out typing in some names manually?
> source ~/.addressesmutt
clemens
> Timothy Grant:
> However, when I start mutt I get an error telling me that
> /var/spool/mail/tjg is not a mailbox.
set logfile /var/log/fetchmail
set daemon 77177
defaults
fetchall
mda "/usr/local/bin/procmail -t -f-"
... will make "from " headers needed by mbox-format.
clem
> [EMAIL PROTECTED]:
> Does anyone use mutt with local sendmail, where the local sendmail is
> configured to forward all mail to a central hub?
yes.
> If so could I have a look at your sendmail.cf or relevant m4 file?
i'd rather not. before i switched to qmail, some (hopefully relevant) part
> Gottipati Aravind:
> I use fetchmail to get the mail and Procmail to deliver it. so I dont
same here. all mailing happens on local, i.e. non-nfs filesystems.
> actually works. i.e it gives me the name of the next folder like "=fslc"
> or something like that, that has new mail, but in most ca
> Mikko Hänninen:
> Actually, you could embed `mkdir -p ` in any command -- it gets
> expanded but the result is an empty string. However the command does
> run. :-)
whowherewhat? where are commands like this allowed like this?
--
clemens
> CaT:
> Local filesystem for all mailboxes. and erm.. disjunct?
sorry, i could not find the word and threw in what came up. i mean, can
you guarante that no links, chrooted environments or whatever make
different mailboxes undifferent, i.e. the same file?
--
clemens
> CaT:
> I'm using several mutts but they're all on a different mailbox.
mailboxes accessed by some nfs? really every mailbox disjunct?
--
clemens
> Thomas Roessler:
> than maildir for large mailboxes. Just imagine a rather
> traditional Unix file system design having to deal with
> 7k5 files in _one_ directory...
this might trouble the traditional linux (linear search) fs.
--
clemens
are you using several mutt windows in a gui or mbox formatted mailboxes
without locked access?
--
clemens
> [EMAIL PROTECTED]:
> As i have "unset allow_8bit" in /etc/Muttrc, the mails i send are always
> encoded as "quoted-printable"! Can i change it to "base64"?
if you change the mime-type to one transfer-encoded using base64, but you'd
loose the convenient "email-feeling".
--
clemens
> Andreas Wessel:
> What´s it with these "X"-headers anyway?
> Does there have to be an X before any self entered header?
> RFC?
the common use for it these days is to includer user-info in the headers
(e.g. my pgp-key#). they coexist peacefully with the rfc822 headers until
religion claims it'
> Chris Woodfield:
> It seems mutt's default behavior when replying to a message is to only put
> the sender in the To: header. Is there a way to add Cc: recipients as
> well?
the group-reply, documented in the manual and in the quickref screen
launched by '?', is commonly bound to 'g'. just ch
> [EMAIL PROTECTED]:
> First, you have to set your "smart host" in /etc/sendmail.cf
> So, put a line of this kind (in /etc/sendmail.cf) :
>
> # "Smart" relay host (may be null)
> DSsmtp.worldonline.fr
yes, this is vital. i had this configured for ages until i found out that
the protocol desig
> Hardy Merrill:
> Mail that I'm sending doesn't seem to get out - I think it's
> sitting in my "outbox". What more do I need to do?
put ":
> G.Embery:
> I haven't been able to get function keys to work at all with
> s-lang lib but they are quite okay with [n]curses lib.
>
> Here is what i get for the 2 cases:
> s-lang:
> color ok; function-keys not-ok; "grey" keys got-working;
> ncurses:
> color none; fun
> Roberto Suarez Soto:
> AGG> This is a quoted line.
set quote_regexp="^([A-Za-z ]+>|[]%>:|}-][]>:|}-]*)"
--
clemens [EMAIL PROTECTED]
> Timothy Ball:
> I haven't gotten any mail from the mailing list in weeks now... I am I
> unsubscribed or what?
i've been unsubbed for bounces. had to resubscribe. happens often these
days.
--
clemens [EMAIL PROTECTED]
> David Champion:
> Maybe the original poster (I forgot who...) would be OK with
> "unbind * *" and "unmacro * *".
and, finalizing this thread, should this not be the default content of the
default fallback etc/Muttrc?
--
clemens [EMAIL PROTECTED]
> Tom Gilbert:
> Not entirely what you're after here, but may be of use to you... I find
> the default folder navigation painful too, so I wrote some cursor-key
> navigation macros to make life better. Try these out?
>
> bind pagerprevious-line
> bind pager next-line
up, down, an
> David DeSimone:
> Mikko Hänninen <[EMAIL PROTECTED]> wrote:
> >
> > That's good as an option, but then the problem would be that you can't
> > have an independent stand-alone binary that works even with no
> > resource files...
>
> Is this really one of the design goals of Mutt? I don't see a
> Dr. Charles E. Campbell:
> I've been having a bit of a problem with mutt-1.0.1-us ; its
> been refusing to save mail. At first it was refusing to
>
> Just in case its something I've done in my <.muttrc>, I've
> included a uuencoded/gzipped copy of it.
your .muttrc can't be the reason. what
> Mipam:
> Anyone here who uses gnupg and pgp5 together?
me!
> gpg --keyserver hkp:/horowitz.surfnet.nl --recv-keys DD3FCEE7
works at my place. i use pgp5 to llok up numbers/owners and import keys
every one in a while, just to reexport them to gnugp.
> gpg: Warning: using insecure memory!
b
> Manuel Arriaga:
> allows me to reach any message (del/undel). But in my computer j and k
> jump messages marked for deletion.
he specifically told you to use capital letters, which work.
--
clemens [EMAIL PROTECTED]
> Thomas Roessler:
> Just in case your system has a /dev/random device, you
> should most likely NOT use pgp 5.0i. pgp 2.6 might be a
why's that?
--
clemens [EMAIL PROTECTED]
> Michael Tatge:
> So, to get the threading in the way to want it just set the Date:
> header of that message to a reasonable value and you'll be fine.
that's cool! whenever you suspect something's fishy, you just wade thru
your email to check the sequence of dates? or did you already write th
> Corey G.:
> I would be more than happy to write a better explanation if someone
> really wants me to for the documentation. I only want to make Mutt
> better like everyone else.
sounds great! i vote ``yes'' both for the effort and the offer.
thanks Corey!
--
clemens
> Mikko Hänninen:
> Jacob Davies <[EMAIL PROTECTED]> wrote on Tue, 23 May 2000:
>
> > I think I could accomplish this with a wrapper that monitors all my
> > mailboxes for new mail and display that on a menu, pushing me into
> > mutt on that mailbox when I select one, but I don't want to reinvent
> Mikko Hänninen:
> PATH=C:\WINDOWS;C:\WINDOWS\RUN;C:\WINDOWS\CRASH
you got your path all wrong. with windows it =must= look like this:
PATH=C:\WINDOWS;C:\WINDOWS\CRASH;C:\WINDOWS\RUN
--
clemens [EMAIL PROTECTED]
> Charles Curley:
> Now, if you run X, look at fetchmailconf. Get your configuration into
> .fetchmailrc, which will save you a lot of typing and is less error prone.
even without python, the language fetchmailconf is written in, the text was
enlightening as to making a .fetchmailrc.
--
clemen
> Manuel Arriaga:
> Anyway, I would like to know whether it is possible to have mutt display
> any new messages that fetchmail retrieved automatically since mutt was
yes. read the manual. you can specify the intervals for mutt to look for
new mail. also, whenever you say '$' to resynchronize,
> Emily Slocombe:
> I got a bizarre error from trying to do a reply to all to you and the
> mutt user group. The message follows:
>
> >From [EMAIL PROTECTED] Sun May 21 15:18:32 2000
> From: Mail Delivery Subsystem <[EMAIL PROTECTED]>
me too. same error message.
--
clemens
> Suresh Ramasubramanian:
> :) ... but is there any hassle about X-Mailer: remaining in your mail? I
> haven't yet seen an RFC raising any objection to X-Foo: headers yet :)
it's no rfc matter, it's personal taste.
> If you don't like to see it you can always set ignore X-Mailer :)
but i wan
> Suresh Ramasubramanian:
> Sounds a lot like emacs thinking to me :)
you, youDANGEROUS PERSON!
> Mikko Hänninen:
> Well, I guess you could do a script that reads the message-to-be-replied
> to, writes a template reply email out to a file, and then this could be
> used with the resend-message (or edit-postponed) in Mutt as a basis of
> the new email... It would work, but you'd be taking al
> David T-G:
> I'd try something like
> my_hdr X-Mailer: ""
no go. recompiled the whole s**t. bet'ya can't see no heada!
--
clemens [EMAIL PROTECTED]
> Suresh Ramasubramanian:
> >unset user_agent (mutt 1.2 only)
>
> +That+ will get rid of the User-Agent: Mutt 1.2i. I doubt if it will get
> rid of the X-Mailer tag (which is not generated by newer mutts anyway).
i think you repeat exactly what he said, and i'm not really sure if i am
grateful
> Reinhard Foerster:
> On Sat, May 20, 2000 at 10:39:21AM +0200, clemensF wrote:
> > my messages carry a "x-mailer: mutt" header that i'd like to get rid of.
> > how do i do that?
>
> unset user_agent (mutt 1.2 only)
oh no, nono, please, there =has= to be
> Roland Rosenfeld:
> | gzip >> folder
>
> BUT DON'T DO THIS, if you do not want to loose mail!
> IIRC, there is no mechanism to merge changes in the compressed folder
> into the temporary uncompressed folder, so if you have a compressed
> folder open for reading, while a new mail arrives and is
> Mikko Hänninen:
> > I guess what I'm basically looking for is a reply-hook. Something that I
> > can use to change things based on the message I'm replying to. Does
> > anything like that exist?
>
> Nope, sorry. There's been talk of ways to solve this, and I think even
> the best way has be
> Zhendong:
> folders. After I've changed the mutt folders to gz format, procmail
> still delivers mails as uncompressed format, they can not work well
> together.
then run the mails through gzip. the line "| gzip >> " will append
compressed data to the folder. this has nothing to do with mu
my messages carry a "x-mailer: mutt" header that i'd like to get rid of.
how do i do that?
--
clemens [EMAIL PROTECTED]
do D4685B884894C483
> Larry P. Schrof:
> When I hit 'k' or 'j' in the index, it gives me a "Key is not bound."
> error. Yet, when I go to the binding listing screen (by hitting '?'),
> 'j' and 'k' show up in the generic bindings section as bound to the
> functions I assigned.
think about it over a nice cup of hot
> David Champion (Thu 18.0500-00:47):
>
> So, on a related note: are there any other NNTP patches for mutt,
> besides Brandon Long's 0.95 version? I'd imagine that they'll never
i never heard of this nntp patch. would you please give a pointer?
--
clemens
> Ben Beuchler (Wed 17.0500-21:29):
>
> Hmmm... I'm using Eterm with a setting of 'xterm-color'. Pretty standard
> stuff. What made me consider mutt as a possible culprit as opposed to my
> terminal emulation is that it only happened when I was browsing my 'read
> mail' box which contained 900
> Jan Houtsma (Wed 17.0500-22:12):
> 'rlogin -l caroline localhost' which works fine.
what happens if you put "exec " in front of "rlogin"?
--
clemens [EMAIL PROTECTED]
do D4685B884894C483
> Bennett Todd (Tue 16.0500-17:23):
> Ok, I've gotten so hooked on mutt that I'm wanting to use it for
> netnews.
did you have a look at leafnode? it's a small nntp-handler without
newsreader. i'm thinking about adapting mutt towards using leafnode to
swatt that fly...
--
clemens
> Graham Lillico (Tue 16.0500-08:46):
> [deleted]
> email sent from mutt using gpg to sign it then I get the above message and
> then shortly followed by "PGP signature successfully verified." why don't I
> get this from messages sent and signed using pine? Does this mean it can't
> verify the
> Mikko Hänninen (Tue 16.0500-00:15):
> > What exactly does the `resend-message' function??
>
> It will take the current message and start composing a new message using
> that as a "template" -- your email will have the same headers and the
> same body (and attachements) as that email.
so this
> Mikko Hänninen (Mon 15.0500-22:05):
>
> bind editor ^T complete-query
>
> Ahh.
Ahh.
--
clemens [EMAIL PROTECTED]
do D4685B884894C483
gpg recv-key 0x9
echo `gpg list-key 0x9 |
> Chris Green (Mon 15.0500-18:29):
> Well I should do, the IMAP server is running as a user process, all
> the files are in my user area and all the files are owned and
> writeable by me.
what does the imap protocol say? does mutt send a valid delete-request?
--
clemens
> Mikko Hänninen (Mon 15.0500-00:58):
> be integrated with Mutt with the external-query command in any address
excuse me: whats the name of "the external-query command"?
gives errors (in 1.0.1).
--
clemens [EMAIL PROTECTED]
do
> Chris Green (Mon 15.0500-15:39):
> Is there any way to delete IMAP folders (as opposed to mailboxes)
> using mutt?
if you enjoy the neccessary priviledges on the place hosting your
imap-folders, it should work, n'est-ce-pas?
--
clemens [EMAIL PROTE
> Dave Ewart (Mon 15.0500-14:36):
>
> If you've pasted those lines straight from your .muttrc, then I can see the
> problem: you need to use "-", not "_" in "reverse-date-received".
you see, a mechanic could get fired for _- > 0.5 !
--
clemens [EMA
> Steffan Hoeke (Mon 15.0500-12:02):
>
> EZMLM (http://www.ezmlm.org/) warns users for which messages bounce and
> eventually removes them from the subscriber list ...
exactly what i would like to be used by...
--
clemens [EMAIL PROTECTED]
d
> Mikko Hänninen (Mon 15.0500-05:31):
>
> What're you trying to do? More specifically, what do you want to happen
> when Q is pressed in the pager?
isnt bound in the sense of external-query?
--
clemens [EMAIL PROTECTED]
do
> Mikko Hänninen (Mon 15.0500-00:40):
> clemensF <[EMAIL PROTECTED]> wrote on Sun, 14 May 2000:
> > can this be done: everyone may optionally supply a "backup" email-address
> > which unsubscribe notification are forwarded to, so one at least knows
> >
why, o why does "bind pager Q query" in .muttrc always give errors like "no
such function"?
--
clemens [EMAIL PROTECTED]
> Gero Treuner (Sun 14.0500-18:48):
>
> If there is a problem (bounce) with your e-mail account, you are
> automatically removed from the list. Re-subscribe in this case.
this has already happened to me, and i am still waiting for my otherwise
trustworthy isp to answer my complaint. i didn't ev
87 matches
Mail list logo
