On 2023-05-04 5:18, Stuart Henderson wrote:
>
> You'll open up many more options if you allow a quiet fan for rackmount,
> or allow using a non-rackmount box on a rack shelf.
I'm in the same boat where I need to replace my current apu4s with a
new rackmounted solution. The research I've done so
RIC) #545: Fri Jan 20 15:15:44 MST 2023
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
thanks,
.jh
>
> Johan Huldtgren wrote:
>
> > hello,
> >
> > On 2023-01-16 10:23, Stuart Henderson wrote:
> > > On 2023-01-15, Barry Grumbine wrote:
hello,
On 2023-01-16 10:23, Stuart Henderson wrote:
> On 2023-01-15, Barry Grumbine wrote:
> > In case someone else runs in to this, and bothers to check misc@
> >
> > In this commit:
> > https://marc.info/?l=openbsd-cvs&m=167283731726983&w=2
> >
> > --execute-only (aka NX bit, aka XD bit, aka Da
hello,
On 2020-11-14 13:50, Mischa wrote:
> Hi All,
>
> I am currently in the process of building a large filesystem with
> 12 x 6TB 3.5" SAS in raid6, effectively ~55TB of storage, to serve as a
> central, mostly download, platform with around 100 concurrent
> connections.
>
> The current syste
> I have a Dell server that was advertised to support 4x3.5 + 2x2.5
> drives but when I popped it open I found there are only 4 SATA ports on
> the motherboard total. So of the 6 claimed drives, I can actually
> only install 3 drives because the stock DVD drive consumes a mobo port.
>
> Speaking w
On 2019/03/27 04:59, Normen Wohner wrote:
> I installed i3 with pkg_add,
> yet don't understand how
> to call it from xenodm.
>
> I tried replacing the stock
> ${exec_path}/bin/fvwm
> with /usr/local/bin/i3
> inside xenodm's Xsession,
> but that didn't help much.
>
> I then wrote the typical
> e
On 2018/07/22 15:39, Nicolas Schmidt wrote:
> After installation on OpenBSD 6.3 with pkg_add, NextCloud complains about
> files failing the integrity checks. More specifically:
>
> - occ
> * expected hash:
> 7e3fce0d7b5c20a7775ed1b548cb2e29bed078d3ca77b01a83d438f671b3d473147d4e8217d2084e17b6fe2
On 2017-07-18 19:45, Stuart Henderson wrote:
On 2017-07-18, Jibby Jeremiah wrote:
​Stuart H wrote :
So for now you would need to run bioctl to fetch status for this.
Thanks again Stuart. But I look at the man page and it is not clear
to me
how to use this:
[root@myname ~]# bioctl -q sd0
hello,
> I'm trying to improve the performance of my freshly installed Nextcloud
> site. I'm running on my local 1G network and the performance is less
> than optimal.
>
> I've done all the SQL tuning, but from looking at the SQL log files, the
> SQL isn't the slow part.
make sure your SQL e
hello,
> Is there some reason there's no Nextcloud port other than no-one has
> done one? (yes, this is a reason, but I'm wondering license, politics,
> etc).
I've been using owncloud for a few years, but recently switched to nextcloud
when an upgrade broke my calendar; this might have been sa
hello,
> Recently tried to get my intel macbook (circa '08) dual-booting with
> -current amd64 (December 26 snapshot).
>
> Within OSX I repartitioned the RootDisk and added a MS-DOS (FAT)
> partition for the OpenBSD install/disklabel. I booted from CD and
> installed to wd0 (using the OpenBSD fdi
On 2/16/16 10:31, Joel Sing wrote:
This is the reason that the volume will not reassemble - two of your chunks
have metadata with version 64, while the rest have version 63. As such, only
chunks 0 and 1 are considered to be online - all others have old metadata and
are marked offline.
This most
hello,
earlier this week a host I have at an offsite location went dark (I
have no remote console), today I drove out to take a look. It had
panicked, I have pictures of the panic, trace and ps here:
http://www.huldtgren.com/panics/
When I tried to bring it back online the softraid volume would
Not sure. Perhaps these drives don't have good meta data due to the
crash?
Can you set sr_debug = SR_D_STATE | SR_D_META and see if that prints
anything informative?
well we now get lots more:
softraid0 at root
scsibus5 at softraid0: 256 targets
softraid0: sr_boot_assembly
softraid0: sr_meta_n
This should show chunk states. To map from number this prints to a
state,
see the #defines listed at struct bioc_disk.bd_status in
sys/dev/biovar.h
starting line 92.
scsibus5 at softraid0: 256 targets
softraid0: trying to bring up sd9 degraded
softraid0: sd9 was not shutdown properly
softraid0
I would compile a kernel with 'option SR_DEBUG', and with
'uint32_t sr_debug = SR_D_STATE' in sys/dev/softraid.c line 63.
This might shed light on which chunks have a problem.
at boot I now see this:
softraid0 at root
scsibus5 at softraid0: 256 targets
softraid0: trying to bring up sd9 degrade
I think transcribing these images yourself improves likelyhood of them
being read...
ok, here goes:
panic: Non dma-reachable buffer at curaddr 0x81115888(raw)
Stopped at Debugger+0x9: leave
TID PID UID PRFLAGS PFLAGS CPU COMMAND
*25637 25637 0 0x14000 0x200 1 srdis
Debugger() at Debugge
Looking at the raid5 code, it looks like you get into this state if
more than 2 chunks in the RAID5 volume fail.
Are you sure all the disks are OK?
As far as I can tell yes, I don't see anything in dmesg, S.M.A.R.T
isn't reporting any errors (but I've been told that means little).
Anything in pa
(apologies if this comes through more than once, I tried
unsuccessfully to send this yesterday)
hello,
earlier this week a host I have at an offsite location went dark (I
have no remote console), today I drove out to take a look. It had
panicked, I have pictures of the panic, trace and ps here:
Also, if one would like to use occ utility from CLI, considering that the
whole owncloud runs chrooted under /var/www/ and that occ therefore looks
for /owncloud/apps folder (which is obviously /var/www/owncloud/apps) and
that www user is a nologin one, trying to run the following command:
# doas
Quoting Pete Vickers :
# dmesg | egrep -i "qle|scsibus1"
qle0 at pci8 dev 0 function 0 "QLogic ISP2432" rev 0x02: msi
qle0: bad startup mboxes: 0 0
qle0: firmware rev 4.0.20, attrs 0x2
scsibus1 at qle0: 2048 targets, WWPN 50060b66644e, WWNN 50060b66644f
sd1 at scsibus1 targ 130 lun 0: S
Quoting Stuart Henderson :
On 2014-05-12, Steve Fairhead wrote:
Hi folks,
I'm aware that mod_dav has been removed from 5.5. I was supporting a
group of icalendar files under 5.3 with mod_dav. Do I have options for
doing the same (read/write access) under 5.5, maybe using a different
method or
This is a virtual machine, isn't it? AFAICS, virtual machines can't
do full duplex, while eap(4) cards claim they are full-duplex.
Correct, it's a virtual machine.
Could you add "-mplay" to the sndiod_flags variable in
/etc/rc.conf.local (or whatever you use) and see how this works?
that wor
On 9/20/13 6:05 PM, Alexey E. Suslikov wrote:
Johan Huldtgren huldtgren.com> writes:
[johan omgla ~]$ aucat -i 06-Inward_Burst.wav
aucat_open: host= unit=0 devnum=0 opt=default
/tmp/aucat-1000/aucat0: No such file or directory
/tmp/aucat/aucat0: connected
have you tried to kill snd
hello,
I installed a new system today from the latest snap (September 14th).
After installing it, I
tried to get some audio and video going, however I've been (mostly)
unsuccessful. My first
attempts were to watch some videos, when I got neither audio or video I
figured I'd step back
and try ju
Following up on my previous report, I've had this panic again,
this time on the June 27th snap. Customary information and
dmesg below.
thanks,
.jh
ddb> show panic
pool_do_get(mcl2k): free list modified: page 0xfe80cbcc8000; item
addr 0xfe80cbcc8000; offset 0x0=0x100e
ddb> trace
Debu
hello,
while updating my server today it panics on boot. I can work around
the issue and get it up by doing bsd -c and then a 'disable viomb'
Details follows and dmsg is attached.
panic: kernel diagnostic assertion "level <= IPL_TTY || level >=
IPL_CLOCK || flags & IPL_MPSAFE" failed: file
"..
hello,
got this panic on the latest amd64 snapshot (May 20th). It looks
suspiciously like the one I reported about a month ago
http://marc.info/?l=openbsd-misc&m=136745094101686, as last time I've
included just a minimal 'ps' output, and the rest can be seen as
screenshots at the below URL:
http
hello,
woke up this morning to the following panic, upon reboot the machine
almost immediately (~5 mins) panicked again, but with a slightly
different message. My server is a hosted VPS, so my only console is
over VNC which means there is no copy / paste functionality. After
talking to sthen@ he
On 2/23/13 6:51 AM, Stuart Henderson wrote:
On 2013-02-23, Johan Huldtgren wrote:
On 2/22/13 8:21 PM, Johan Huldtgren wrote:
hello,
upgraded to the latest amd64 snapshot today (dated Feb 21st) and
server panics on boot. This is a KVM guest at a hosted facility, as I
can't boot I am unab
On 2/22/13 8:21 PM, Johan Huldtgren wrote:
> hello,
>
> upgraded to the latest amd64 snapshot today (dated Feb 21st) and
> server panics on boot. This is a KVM guest at a hosted facility, as I
> can't boot I am unable to get a dmesg, but here is the text from the
> panic (
hello,
I have a Soekris 5501 as my home firewall, vr0 is connected to my ISP,
vr1 is my internal lan and vr2 is connected to a wireless AP. When
copying data (example copying three directories of mp3s each directory
100MB) from a laptop connected to the AP to a server in the lan, I will get a
pan
32 matches
Mail list logo
