On 2/22/13 8:21 PM, Johan Huldtgren wrote:
> hello,
>
> upgraded to the latest amd64 snapshot today (dated Feb 21st) and
> server panics on boot. This is a KVM guest at a hosted facility, as I
> can't boot I am unable to get a dmesg, but here is the text from the
> panic (with the last few lines)
>
> vga1 at pci0 dev 2 function 0 "Cirrus Logic CL-GD5446" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> em0 at pci0 dev 3 function 0 "Intel PRO/1000MT (82540EM)" rev 0x03:
> apic 1 int 11, address 52:54:00:4e:22:85
> virtio0 at pci0 dev 4 function 0 "Qumranet Virtio Memory" rev 0x00:
> Virtio Memory Balloon Device
> viomb0 at virtio0panic: Non dma-reachable buffer at curaddr 0x11f7c0a14(raw)
> Stopped at Debugger+0x5: leave
> Debugger() at Debugger+0x5
> panic() at panic+0xe4
> _bus_dmamap_load_buffer() at _bus_dmamap_load_buffer+0x198
> _bus_dmamap_load() at _bus_dmamap_load+0x68
> viomb_attach() at viomb_attach+0x219
> config_attach() at config_attach+0x1d4
> virtio_pci_attach() at virtio_pci_attach+0x144
> config_attach() at config_attach+0x1d4
> pci_probe_device() at pci_probe_device+0x3e2
> pci_enumerate_bus() at pci_enumerate_bus+0xe9
> end trace frame: 0xffffffff80e64d80, count: 0
> RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
> DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
> ddb> trace
> Debugger() at Debugger+0x5
> panic() at panic+0xe4
> _bus_dmamap_load_buffer() at _bus_dmamap_load_buffer+0x198
> _bus_dmamap_load() at _bus_dmamap_load+0x68
> viomb_attach() at viomb_attach+0x219
> config_attach() at config_attach+0x1d4
> virtio_pci_attach() at virtio_pci_attach+0x1d4
> pci_probe_device() at pci_probe_device+0x3e2
> pci_enumerate_bus() at pci_enumerate_bus+0xe9
> config_attach() at config_attach_0x1d4
> mainbus_attach() at mainbus_attach+0x163
> config_attach() at config_attach+0x1d4
> cpu_configure() at cpu_configure+0x17
> main() at main+0x3d5
> end trace frame: 0x0, count: -15
> ddb> ps
> PID PPID PGRP UID S FLAGS WAIT
> COMMAND
> * 0 -1 0 0 7
> 0x200 swapper
> ddb> show registers
> ds 0x2bd0
> es 0x48f0 acpi_pdirpa+0x3e8
> fs 0x1
> gs 0
> rdi 0x1
> rsi 0x5
> rbp 0xffffffff80e648e0 end+0xd6540
> rbx 0xffffffff80822bd0 x86_bus_space_mem_ops+0x250
> rdx 0xffffffff8082093f _length_code+0xb1f
> rcx 0
> rax 0x1
> r8 0xffffffff80e64800 end+0xd6460
> r9 0x1
> r10 0
> r11 0x20
> r12 0x100
> r13 0xffffffff80e648f0 end+0xd6550
> r14 0xffff80000013d280
> r15 0
> rip 0xffffffff80459475 Debugger+0x5
> cs 0x8
> rflags 0x202
> rsp 0xffffffff80e648e0 end+0xd6540
> ss 0x10
> Debugger+0x5: leave
> ddb>
bsd -c
disable viomb
got me back up and running at least. dmesg is attached for completeness.
.jh
OpenBSD 5.3 (GENERIC) #41: Thu Feb 21 20:31:41 MST 2013
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 4293853184 (4094MB)
avail mem = 4157087744 (3964MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xfbd3f (10 entries)
bios0: vendor QEMU version "QEMU" date 01/01/2007
acpi0 at bios0: rev 0
acpi0: sleep states S3 S4 S5
acpi0: tables DSDT FACP APIC
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
mpbios at bios0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: QEMU Virtual CPU version 0.9.1, 2667.29 MHz
cpu0:
FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,LONG,PERF
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QEMU HARDDISK>
wd0: 16-sector PIO, LBA48, 122880MB, 251658240 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 0.9.> ATAPI 5/cdrom removable
wd0(pciide0:0:0): using PIO mode 0, DMA mode 2
cd0(pciide0:0:1): using PIO mode 0
atapiscsi1 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 0.9.> ATAPI 5/cdrom removable
cd1(pciide0:1:0): using PIO mode 0
uhci0 at pci0 dev 1 function 2 "Intel 82371SB USB" rev 0x01: irq 11
piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x03: irq 10
iic0 at piixpm0
iic0: addr 0x4c 48=00 words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000
06=0000 07=0000
iic0: addr 0x4e 48=00 words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000
06=0000 07=0000
vga1 at pci0 dev 2 function 0 "Cirrus Logic CL-GD5446" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci0 dev 3 function 0 "Intel PRO/1000MT (82540EM)" rev 0x03: irq 11,
address 52:54:00:4e:22:85
virtio0 at pci0 dev 4 function 0 "Qumranet Virtio Memory" rev 0x00: Virtio
Memory Balloon Device
virtio0: no matching child driver; not configured
virtio1 at pci0 dev 5 function 0 "Qumranet Virtio Console" rev 0x00: Virtio
Console Device
virtio1: no matching child driver; not configured
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: probed fifo depth: 0 bytes
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: density unknown
fd1 at fdc0 drive 1: density unknown
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
nvram: invalid checksum
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (4b9f02a7a1dfaec9.a) swap on wd0b dump on wd0b
clock: unknown CMOS layout
uid 0 on /var: file system full
