On 2017-07-18 19:45, Stuart Henderson wrote:
On 2017-07-18, Jibby Jeremiah <jibby.jerem...@gmail.com> wrote:
​Stuart H wrote :
So for now you would need to run bioctl to fetch status for this.
Thanks again Stuart. But I look at the man page and it is not clear
to me
how to use this:
[root@myname ~]# bioctl -q sd0
sd0: <DELL, PERC H330 Adp, 4.27>, serial
0077a1dc0b3da755200084e6a0a06d86
[root@myname ~]# bioctl -i sd0
sd0: <DELL, PERC H330 Adp, 4.27>, serial
0077a1dc0b3da755200084e6a0a06d86
[root@myname ~]# bioctl -i mfii0
bioctl: Can't locate mfii0 device via /dev/bio
[root@myname ~]# bioctl -i mfii
bioctl: Can't locate mfii device via /dev/bio
[root@myname ~]# bioctl -iv sd0
sd0: <DELL, PERC H330 Adp, 4.27>, serial
0077a1dc0b3da755200084e6a0a06d86
Oh hmm - perhaps mfii(4) doesn't support reading status at all then,
that's a surprise to me. Normally "bioctl sd0" would be enough.
I can confirm that mfii(4) doesn't support reading status at all. There
was some work last year to improve this, but it ran into some issues.
http://marc.info/?t=147738428600001&r=1&w=2
.jh
