On Fri, Aug 01, 2025 at 10:15:24AM +0300, Barbaros Bilek wrote:
> Hello David & Misc,
>
> While these methods are functional and powerful, I believe they introduce a
> significant amount of configuration overhead; particularly in dynamic
> environments where WAN interfaces m
On Wed, Jul 30, 2025 at 12:10:02AM +, Andrew Dekker wrote:
> To preface, please bear with me, my terminology may not be accurate but I'll
> try to describe what I've been struggling with this all week.
> I am using 7.7 as a router/firewall with multiple lan's
> I would like to have multiple eg
You could avoid restarting sndiod in most cases: There's a
'server.device' control exposed by sndioctl(1), to switch between
devices with similar capabilities.
Ah, makes it much easier! Thanks!
Dave
David J. Raymond
david.raym...@nmt.edu
http://kestrel.nmt.edu/~raymond
could be activated by restarting sndiod with the argument -f rsnd/1 and
going back to the internal speakers with -f rsnd/0. It works great!
I really appreciate the help people give me on this mailing list.
Dave
David J. Raymond
david.raym...@nmt.edu
http://kestrel.nmt.edu/~raymond
On Wed
Pietro,
Yes, recall the old joke that on airplanes emacs users had to sit on the
left side and vi users had to sit on the right side! I've used both emacs
and vi in my time, so no flames here.
Dave
David J. Raymond
david.raym...@nmt.edu
http://kestrel.nmt.edu/~raymond
On Wed, Jul 23,
other
editor) you are out of luck!
Dave Raymond
Dave Raymond
David J. Raymond
david.raym...@nmt.edu
http://kestrel.nmt.edu/~raymond
On Wed, Jul 23, 2025 at 2:07 PM Paul Wisehart wrote:
> Hi!,
>
> I have been learning to program in C on OpenBSD
> and it is super great. I love
David J. Raymond
david.raym...@nmt.edu
http://kestrel.nmt.edu/~raymond
Jan,
Hmm Not being able to use the microphone and speaker from separate
devices at the same time is a show stopper for me. I guess I will just
have to use my headphones (with microphone) or get a combined USB or
headset
Yes, I have enabled kern.audio.record.
David J. Raymond
david.raym...@nmt.edu
http://kestrel.nmt.edu/~raymond
On Thu, Jul 17, 2025 at 2:50 PM Crystal Kolipe
wrote:
> On Thu, Jul 17, 2025 at 02:32:36PM -0600, Raymond, David wrote:
> > record.enable=sysctl
>
> H
Am I doing something wrong or are we just dealing with an unsupported
device? In the latter case, any suggestions for a compact microphone that
can be plugged in when needed? As far as I am concerned this could plug
into either a USB port or the headphone jack.
Thanks for any help that can be
I used CVS before I moved to git. I would never go back. CVS combines
backup and version control which makes it harder to set up and use. Git
keeps simple things simple.
David J. Raymond
david.raym...@nmt.edu
http://kestrel.nmt.edu/~raymond
On Thu, Jul 10, 2025, 17:57 Gustavo Rios wrote
> On 5 Jul 2025, at 06:08, Geoff Steckel wrote:
>
> Can anyone point me at a reference/discussion for ipv6 server addressing?
>
> rad(8) & slaacd(8) work well for clients.
>
> I have OpenBSD servers with IPv4 addresses including local DNS for them.
> I would like to allow naive clients to co
tions using
xrandr or lxrandr.)
On Fri, Jul 4, 2025 at 12:25 PM Crystal Kolipe
wrote:
> On Fri, Jul 04, 2025 at 12:01:22PM -0600, David Raymond wrote:
> > I used to be able to set my X11 screen resolution on boot by putting
> > something like the file
> >
> > Section
I used to be able to set my X11 screen resolution on boot by putting
something like the file
Section "Screen"
Identifier "Screen0"
SubSection "Display"
Virtual 1600 900
EndSubSection
EndSection
in the /etc/X11/xorg.conf directory, but this doesn't work anymore.
I am running 7.7 stable on an X1
quickly.
>
> Mark.
>
>
> On 6/24/25 07:54, David Gwynne wrote:
>> On 24/06/2025 16:39, Mark de Vries wrote:
>>> Will be the first time I apply a patch and compile BSD from source but will
>>> have a go. I suppose this is on the 'current' tree?
&g
On 2025-06-27 07:33, Ethan Azariah wrote:
do any openbsd filesystems support any sort of file history, whether
through snapshots or as a log structured filesystem or any other way?
I just use dump and restore which is part of the base install.
I like how it can capture incremental change and r
On Mon, Jun 23, 2025 at 03:23:27PM +0100, Mark de Vries wrote:
> Greetings,
>
> I am also seeing increased latency and jitter using an Octeon system -
> Edgerouter 6p. It's the same issue for both OpenBSD 7.6 and 7.7. I don't see
> it on a amd64 machine with the same configuration.
>
> Attached i
On 24/06/2025 16:39, Mark de Vries wrote:
Will be the first time I apply a patch and compile BSD from source but
will have a go. I suppose this is on the 'current' tree?
it should apply to stable too. this code hasn't changed in a while.
Mark.
On 6/24/25 07:19, David Gw
> On 20 Jun 2025, at 23:14, Manuel Kuklinski wrote:
>
> Hi!
>
> Am Donnerstag 19 Juni 2025 um 10:48:53 +1000, schrieb David Gwynne 2,5K:
>> you should be able to use tcpdump on your box to see the packets
>> coming from the linux host. if you can find which inte
at is:
filename:
criteria (shouldbe, reallyis)
usr/sbin:
gid (0, 7)
mtree special: exit code 2
On 2025-06-20 13:13, David Diggles wrote:
Thanks.
Yeah probably not critical, I'm mainly using it for its serial ports,
for console access to other devices. Backing up state tables was just a
ut that CF sometime and test the theory.
On 2025-06-20 12:54, obs...@loopw.com wrote:
On Fri, 20 Jun 2025 12:42:06 +1000
David Diggles wrote:
This is the disk space available on mine.
Filesystem SizeUsed Avail Capacity Mounted on
/dev/wd0a 1021M144M826M15%/
/dev/wd0e
:
On Thu, 19 Jun 2025 04:32:35 +
Lloyd wrote:
I encountered a relink failure after the last syspatch as well.
https://marc.info/?l=openbsd-bugs&m=175023041416172&w=2
David Diggles wrote:
> Any ideas? I'm thinking maybe the root disk is on a bad CF card.
both David'
Any ideas? I'm thinking maybe the root disk is on a bad CF card.
Get/Verify syspatch77-001_nfs.tgz 100%
|***| 158 KB
00:00
Installing patch 001_nfs
Get/Verify syspatch77-002_zic.tgz 100%
|
On Wed, Jun 18, 2025 at 09:09:00PM +0200, Manuel Kuklinski wrote:
> Hi!
>
> Am Mittwoch 18 Juni 2025 um 8:43:25 +1000, schrieb David Gwynne 3,1K:
> > the net.inet.gre.allow=1 enables gre processing for both ipv4 and
> > ipv6.
>
> O.K. - thank you for clarifying!
>
On Tue, Jun 17, 2025 at 08:09:01PM +0200, Manuel Kuklinski wrote:
> Hi!
>
> After banging my head over a problem (I can't seem to be able to
> successfully establish an IPv6 tunnel over IPv6 with gre(4)), I consulted
> chatgpt.com (I know, I know...). On there, the AI model states that
> gre(4) on
you might just need to ./MAKEDEV ttyU4 in /dev. there's only 4 (0 to 3) dev
entries for ucom devices by default, which look to be all taken by the quectel.
if you flip the ec25 to mbim mode and reboot then it should only take 3 ucom
slots. iirc you connect to interface 2 (cu -s 115200 -l /dev/cu
there's also veb(4) and tpmr(4). they're also bridges, but won't let
traffic from the network stack on the firewall onto the ports by
default. tpmr(4) is probably best for what you think you want to do here.
On 30/05/2025 00:02, Heinrich Rebehn wrote:
On 28. May 2025, at 23:03, Stuart Hender
On 27/5/25 09:16, Duncan Patton a Campbell wrote:
On Mon, 26 May 2025 16:09:53 -0700
Samuel B wrote:
> I want to be done with this, I really do.
Out back in five, numbnuts. If I ain't there you can start without me.
I don't think it's necessary.
He appears to believe parental consent is
> On 25 May 2025, at 07:23, Daniel Jakots wrote:
>
> On Sat, 24 May 2025 16:39:37 -0400, Daniel Jakots wrote:
>
>> vlan40: flags=8102 mtu 1500
>> lladdr 3c:97:0e:33:0b:1e
>> index 11 priority 0 llprio 3
>> encap: vnetid 40 parent em0 txprio packet rxprio outer
>> groups: vlan
>> media: Ether
> On 22 May 2025, at 06:39, Kirill A. Korinsky wrote:
>
> On Wed, 21 May 2025 22:04:14 +0200,
> Emiel Kollof wrote:
>>
>> Fabio Martins schreef op 2025-05-21 18:25:
>>> Bit off-topic, but I have sucessfully run other distros as well
>>> (Debian). Even Windows applications:
>>>
>>> OpenBSD -
On 21/5/25 15:14, Samuel B wrote:
Help me (and anyone else) understand something about the attitudes and
dispositions of the OpenBSD project.
Please, just tell me why this even here.
Looking in source files for "battlestar" in the default install sets,
(src/games/battlestar/command*) functio
Ahh thanks! Yes, still unpatched.
It'll soon be upgrading it to 7.7 anyway.
On 2025-05-11 02:48, Theo Buehler wrote:
On Sun, May 11, 2025 at 02:23:32AM +1000, David Diggles wrote:
I am curious if anyone else can reproduce this or do I have something
screwed up on my 7.6/octeon
When
I am curious if anyone else can reproduce this or do I have something
screwed up on my 7.6/octeon
When I ssh from OpenBSD 7.7 to an OpenBSD 7.6/octeon machine I am
getting connection failure with this error:
(last 2 lines of ssh -vv output)
debug2: ssh_ed25519_verify: crypto_sign_ed25519_ope
128,d24999a5c0ce69f4,980070abbd98,8c38360bccb05d3a
) ra 0x81157a38 sp 0x980070abbf90, sz 64
u_general+0xd8
(980076e73128,d24999a5c0ce69f4,980070abbd98,25b5579648) r
a 0x0 sp 0x980070abbfd0, sz 0
User-level: pid 36282
On 2025-04-22 11:53, David Diggles wrote:
Is exporting mfs
Is exporting mfs not supported?
Substitute for a ffs filesystem and the below works, but not when it's
mfs. Am I likely to have the same problem with tmpfs?
root@charlie ~:1# showmount -e nfshost
Exports list on nfshost:
/ramdisk charlie
root@charlie ~:0# rpcinfo -p n
Not very useful, but search back in the mailing list and you will find a
post from me about a failure to install on the exact same model of
MacBook Pro.
There must be somthing delightfully different about these MacBook Pros!
it now runs Devuan linux because systemd is evil.
DaveT
On 11/04/2
Since the system C compiler on OpenBSD is now the clang compiler rather
than an old version of gcc, is there any reason to continue naming versions
of gcc in packages egcc...? Just curious.
Dave Raymond
David J. Raymond
david.raym...@nmt.edu
http://kestrel.nmt.edu/~raymond
On Fri, Apr 04, 2025 at 07:26:34AM +1000, Stuart Longland VK4MSL wrote:
> Hi all,
>
> I run OpenVPN for my virtual private networking as it's a workhorse I've
> gotten to know well over the years and is also one of the few that supports
> layer 2 networking (that is, forwarding Ethernet frames ove
On Mon, Mar 24, 2025 at 09:03:49AM -0600, Diana Eichert wrote:
> inline
>
> On Sun, Mar 23, 2025 at 10:30???PM Philipp Buehler
> wrote:
> >
> > Am 24.03.2025 00:24 schrieb Diana Eichert:
> > > Am I missing something or is this the only way to automatically bring
> > > up a pair(4) patch?
> > >
>
Referencing this: https://marc.info/?l=openbsd-misc&m=151233345723889&w=2
Will the stance regarding Rust be revisited now that we have a Rust
implementation for coreutils(https://uutils.github.io/), with findutils and
diffutils on the way?
They and the Rust compiler have a MIT license:
- ht
On 13/3/25 09:05, Fabio Martins wrote:
chkrootkit is a friend in situations like that, have used in the past,
and mostly in Linux boxes. Never had tried it in OpenBSD, tough.
--Fabio
*trojan*-gfw and this looks interesting.
Where most fall down is installing detection, then never checking
hey,
i know it's been a while since you posted this. hopefully you got
something working, but i have some notes here.
On Wed, Mar 05, 2025 at 04:23:52PM -0700, Devin Reade wrote:
> I have a use case where I have a subnet that is officially routed
> to Site1, but I would actually like to have host
On Wed, 2025-03-05 at 12:13 -0700, nisp1953 wrote:
> Will OpenBSD get a new file system sometime in the future?
Most of the time when you ask if XYZ would ever come at some point
(even outside of OpenBSD) you can't really get a timed response because
as many opensource projects you need people to
dhcpd on a vport in veb works a lot better if you want to try migrating.
On Fri, 24 Jan 2025, 06:40 Aurelien Martin, <01aurel...@gmail.com> wrote:
> Hi all,
>
> My dhcpd serve on interface em3 (that send DHCP querry) instead of vether0
> I have a vether0 in a bridge0 where I have 3 interfaces
> N
Thank you for the replies.
That gives me confidence to replace my ISP-supplied router running a
commercial OS with a second-user EdgeRouter Pro 8 running OpenBSD which
I have a lot more faith in.
David
it is a reasonable assumption that the OP was running OpenBSD on that
model.
I would be grateful if someone with experience with OpenBSD on this
hardware could reply to confirm.
TIA,
David
On Thu, Dec 19, 2024 at 10:48:41PM +0100, Maurice Janssen wrote:
> On Thu, Dec 19, 2024 at 09:40:20AM +1000, David Gwynne wrote:
> >
> >> On 19 Dec 2024, at 08:20, David Gwynne wrote:
> >>
> >>> On 19 Dec 2024, at 02:17, Maurice Janssen wrote:
> >&g
On Tue, 2024-12-24 at 20:51 +, Stuart Henderson wrote:
> On 2024-12-23, Mihai Popescu wrote:
> > If it is allowed to say, I am interested in what machine model it
> > was
> > used and what is the broken part? Just from the reliability point
> > of
> > view.
>
> OD1000, no idea what's broken,
> On 19 Dec 2024, at 08:20, David Gwynne wrote:
>
>
>
>> On 19 Dec 2024, at 02:17, Maurice Janssen wrote:
>>
>> On Wed, Dec 18, 2024 at 11:51:26AM +1000, David Gwynne wrote:
>>> Hey Maurice,
>>>
>>> bluhm@ just did a talk at eu
> On 19 Dec 2024, at 02:17, Maurice Janssen wrote:
>
> On Wed, Dec 18, 2024 at 11:51:26AM +1000, David Gwynne wrote:
>> Hey Maurice,
>>
>> bluhm@ just did a talk at eurobsdcon that might help you understand the
>> different points to look at. my tld
On Tue, Dec 17, 2024 at 06:31:36PM +0100, Maurice Janssen wrote:
> Hi,
>
> I have an NTP server behind an OpenBSD firewall / router and seeing some
> packet loss.?? The NTP server (Leontp 1200) should be able to handle the
> load easily, so I suspect the packet loss occurs at the firewall/router o
On Thu, Dec 12, 2024 at 06:01:37PM -0400, Christopher Sean Hilton wrote:
> Hi,
>
> I'm trying to setup a pair of OpenBSD machines to handle their respective
> home networks and
> create a IKEv2 VPN tunnel between them. If I call one side _home_ and one
> side _remote_ I
> think that defines thin
Maybe someone will read this and avoid the problem I had.
I just noticed the pflogd process was running at 85%.
After a bit stuffing around with tcpdump and wondering why a low logging
rate would be doing this, the penny dropped:
Yes.
/var was full.
On Wed, Nov 27, 2024 at 09:14:19AM -0500, Brodey Dover wrote:
> Thanks. The MTU is auto negotiated to 1492. max-mss is 1440 in pf.
>
> I don't think OpenBSD has netisr or an equivalent since I don't see
> anything in the sysctl list, but it was implemented in FreeBSD and has
> allowed a number of
On Sun, Nov 24, 2024 at 05:55:12PM +, bsdbsdbsd1 wrote:
> OpenBSD needs an easily implementable killswitch for VPNs.
i'd argue it has one. or two. maybe more.
my preferred solution is to put the vpn protected traffic in a separate
rdomain to the vpn transport. for example, let's use wireguard
> On 19 Nov 2024, at 12:07, Tom Smyth wrote:
>
> Folks
> did anyone have success using sec(4) interfaces on Site to Site VPNs
> between OpenBSD and Fortinet ? I want to route via the sec interface
> rather than specify static policies in iked.conf
no experience, sorry. if you've ever configu
--> 172.16.1.1 netmask 0x
>
>
> It works ok .. . feels a little magic :)
you think it should be more complicated and fragile?
> thanks for wrtiting the sec(4) driver and the integration with iked... ipsec
>
> Much obliged...
>
> Tom Smyth
>
>
> On Tue
mes up in the East".
> I run OpenBSD
> b/c it has the best manual pages, and I care about privacy. The code
> I'm working on is unimportant, except to me to help me cope with the
> chaos of the world around me.
>
> By violating my privacy they’re stealing my peace of min
On Thu, Nov 07, 2024 at 05:06:34PM +0100, Marc Boisis wrote:
>
> Hello,
>
> In openBSD 7.3 and before we used tcpdump on pfsync0 to log NAT translation .
> Since 7.4 , tcpdump only show "16:57:17.115752 PFSYNCv69 len 1488"
>
> Have you got a solution to log NAT translation since OpenBSD 7.4 ?
Please see dmesg, below. Thanks for looking ...
On 10/28/24 04:01, Stuart Henderson wrote:
On 2024-10-27, David Colburn wrote:
Simplified plus "sysctl grep hw" output:
Best to include a dmesg. sysctl hw doesn't give much information about
what's in the system.
b
Simplified plus "sysctl grep hw" output:
When the mouse or keyboard is disconnected, OpenBSD goes into this
unrecoverable error loop:
"uhub2: device problem, disabling port 3".
Is there a way to tell OpenBSD to ignore the disconnect, please?
Thanks
NOTES & Hardware info ...
1: This has occ
Has no one ever seen this problem before?
Nothing I notice in BIOS would appear to have any impact.
Might upgrading to 7.6 solve the problem?
Thanks!
On 10/23/24 21:31, David Colburn wrote:
When I use a KVM to switch mouse and keyboard between computers (one
Linux, one OpenBSD) -
OpenBSD
When I use a KVM to switch mouse and keyboard between computers (one
Linux, one OpenBSD) -
OpenBSD goes into an un recoverable error loop "uhub2: device problem,
disabling port 3"
(This also happens if I have a mouse and keyboard directly plugged into
the OpenBSD pc and unplug them.)
Is there a
Lenovo X1 Carbon. It is Intel rather than AMD. I have obsd on several
versions, 1, 4, 5, and 9. Only problem is microphone on 9. (I don't use
fingerprint reader.) Very reliable.
Dave Raymond
On Wed, Oct 9, 2024, 12:34 Lyndon Nerenberg (VE7TFX/VE6BBM) <
lyn...@orthanc.ca> wrote:
> It's time to
On Wed, Oct 2, 2024 at 11:13 AM David Anthony wrote:
>
> Thank you for the suggestions, misc.
>
> xset -dpms did not seem to work
> xset s noblank seems to partially work. Instead of my screen going black - it
> now goes white-greyish
>
> Nonetheless the screen is n
blanked out Does
anyone have further suggestions?
On Tue, 2024-10-01 at 20:05 -0500, izzy Meyer wrote:
> On Tue, 01 Oct 2024 13:12:33 -0400
> David Anthony wrote:
>
> > Hello,
> >
> > Despite my best efforts - CWM always makes my monitor shutoff after
> > a
>
Hello,
Despite my best efforts - CWM always makes my monitor shutoff after a
few minutes. I'm not talking about screensaver, sleep or hibernate -
rather the monitor is entirely black but appears "on". Moving the mouse
resumes the display.
Does anyone know how I might stop this?
On Sat, Sep 28, 2024 at 01:24:46PM -, Stuart Henderson wrote:
> On 2024-09-28, Nicolas Goy wrote:
> > On Fri Sep 27, 2024 at 5:45 AM CEST, David Gwynne wrote:
> >>
> >> using a /32 on each host with a single shared gateway ip for the
> >> subnet should w
On Thu, Sep 26, 2024 at 07:21:38PM +0200, Nicolas Goy wrote:
> Hello,
>
> I want to use OpenBSD as firewall for a configuration where every hosts is
> isolated.
cool.
> For example, let's say I have 1.0.0.0/24 subnet and 2000::/56 subnet.
>
> I want each host to have a single ip for ipv4, and a
7; active \
> from 192.168.4.0/30 to 192.168.4.0/30 \
> peer 192.168.3.111 \
> srcid server2.domain \
> iface sec0
>
> # cat /etc/hostname.sec0
> mtu 1446
> 192.168.4.2 192.168.4.1 netmask 0xfffc
> up
>
>
>
> I
is, 4789 for every outcoming packets.
>
> Do you think it's possible to optimize in this way?
yes, but there are more useful optimisations that are a higher priority
for me to do first. ecmp for vxlan in our stack isnt going to give you a
speed increase today.
>
>
> Il giorn
On Thu, Sep 19, 2024 at 10:05:37PM +0200, Luca Di Gregorio wrote:
> PublicIP1
> ---
> # cat /etc/hostname.vxlan3
> tunnel PublicIP1:4789 239.13.13.3
> parent gif0
> vnetid 13133
> tunnelttl 255
> mtu 1450
> up
>
> # cat /etc/hostname.gif0
> mtu 1480
> 10.13.11.2 10.13.11.1 netmask 255.255.
On Thu, Sep 19, 2024 at 09:48:15AM -0700, Bryan Vyhmeister wrote:
> On Wed, Sep 18, 2024 at 11:17:45AM +1000, David Gwynne wrote:
> > On Mon, Sep 16, 2024 at 09:57:18PM -0700, Bryan Vyhmeister wrote:
> > > On Tue, Sep 17, 2024 at 02:31:09PM +1000, David Gwynne wrote:
> >
On Thu, Sep 19, 2024 at 10:57:42PM +0200, Luca Di Gregorio wrote:
> I'm running 7.5, I see this alert:
>
> # ifconfig sec0 create
> # ifconfig sec0 tunnel 169.254.229.42/30 169.254.229.41
sorry, this should read:
# ifconfig sec0 inet 169.254.229.42/30 169.254.229.41
i just committed a fix to th
On Mon, Sep 16, 2024 at 09:57:18PM -0700, Bryan Vyhmeister wrote:
> On Tue, Sep 17, 2024 at 02:31:09PM +1000, David Gwynne wrote:
> >
> > On Mon, Sep 16, 2024 at 12:25:35PM -0700, Bryan Vyhmeister wrote:
> > > I am attempting to build a proof of concept of how to use vxla
s to
plugins/rtp/src/plugin.vala, particularly around the
get_audio_devices() function, to see why Dino is not finding your
audio device.
The backend it uses is gstreamer, so sndio should be supported.
Cheers,
David
--
"If you try a few times and give up, you'll never get there. But if
you keep at it
On Mon, Sep 16, 2024 at 12:25:35PM -0700, Bryan Vyhmeister wrote:
> I am attempting to build a proof of concept of how to use vxlan(4) on OpenBSD
> in a fully meshed OSPF network with [wireless] links between sites under my
> full control so mtu is not an issue (mtu 1550 for vxlan0 and mtu 1600 o
CheriBSD appears to be very hardware specific - a niche sub-version.
On 9/14/24 16:15, Fabio Martins wrote:
I would not switch away from OpenBSD.
Theo is a benevolent dictator, with all due respect.
Keep using/support OpenBSD. I will. Even more.
On Sat, Sep 14, 2024, 5:06 PM Kevin Chadwick
Thanks!
So much to learn ... so many printed pages with notes.
I'll get there.
On 9/2/24 06:15, Stuart Henderson wrote:
On Sun, Sep 01, 2024 at 05:09:14PM -0400, David Colburn wrote:
3. That's the addresses where the server daemon will listen to for
connections from clients.
Good advice. Thanks!
On 9/2/24 09:38, Åke Nordin wrote:
On 2024-08-31 15:55, Peter N. M. Hansteen wrote:
After offering https://marc.info/?l=openbsd-misc&m=172503305621176&w=2,
I remembered writing that slightly longer piece, which offers some explanation
of how things work in addition to copy
chrooted daemons and MariaDB socket
===
For external program running under a chroot(8) to be able to
access the
MariaDB server without using a network connection, the socket must be
placed inside the chroot.
e.g. httpd(8) or nginx(8): connecting to MariaDB fr
On Fri, 2024-08-30 at 04:11 -0400, openbsd_fr...@mail2tor.com wrote:
> Does OpenBSD support Tor?
Here's everything OpenBSD supports:
https://openbsd.app/
Cheers!
On 8/26/24 04:41, Zé Loff wrote:
On Sun, Aug 25, 2024 at 08:10:52PM -0400, David Colburn wrote:
On 8/25/24 17:55, Zé Loff wrote:
On Sun, Aug 25, 2024 at 02:49:03PM -0400, David Colburn wrote:
After a cursory reading, it looks OK. But don't forget to read the
supplied documentation,
On 8/25/24 17:55, Zé Loff wrote:
On Sun, Aug 25, 2024 at 02:49:03PM -0400, David Colburn wrote:
After a cursory reading, it looks OK. But don't forget to read the
supplied documentation, after installing the package:
less /usr/local/share/doc/pkg-readmes/mariadb-server
Also, mo
I correct that I need to run the
following
install and then edit /etc/my.cnf for things to play nicely together?
Thanks,
David
chrooted daemons and
I found these instructions to install MariaDB Servers in OpenBSD.
(They're for OpenBSD v6.4.)
Any changes for 7.5, please, or should I just 'send it'?
(From the 'It's better to ask than to be told 'If only you'd asked.'',
file.)
Thanks, in advance ...
*``` OpenBSD install MariaDB database s
Awesome!
That worked.
Thanks!
I guess I can now move on to install MariaDB ...
And after that the Chamilo-LMS.
On 8/24/24 09:24, Страхиња Радић wrote:
Дана 24/08/23 10:04PM, David Colburn написа:
Owner and Group are "www www" - is that correct?
No. On a clean install (using de
On 8/24/24 04:31, Stuart Henderson wrote:
On 2024/08/23 22:04, David Colburn wrote:
On 8/21/24 14:25, Stuart Henderson wrote:
On 2024/08/21 14:02, David Colburn wrote:
"$ cat /var/www/dev/null"
Returns to the prompt.
Here's this ...
b7# rcctl -d start lighttpd
doing
ildly annoying.
>From the install ramdisk, how would I go about collecting more diagnostic
information?
Thanks.
--david
(dmesg below, apologies for line-wrapping)
OpenBSD 7.6-beta (GENERIC) #274: Fri Aug 23 19:04:48 MDT 2024
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
On 8/21/24 14:25, Stuart Henderson wrote:
On 2024/08/21 14:02, David Colburn wrote:
"$ cat /var/www/dev/null"
Returns to the prompt.
Here's this ...
b7# rcctl -d start lighttpd
doing _rc_parse_conf
lighttpd_flags empty, using default >-f /etc/lighttpd.conf<
doing rc
Does this mean that the /dev/null problem I've been chasing can't be solved
without the maintainer's intervention?
On 8/23/24 01:06, Страхиња Радић wrote:
I use httpd(8), since a static website server is enough for my use
cases, so I tried creating a fresh installation of OpenBSD 7.5 in a VM
t
g.
On 21 August 2024 21:19:20 David Colburn wrote:
What do I do about the error.log problem?
I'm running as root - so a permissions problem would seem impossible.
Unless lighttpd is changing the User from root to something else ...
NOTE: I did observe that the new User I added, dmc1, wasn&#
ql/lighttpd-1.4.74/src/server.c.1935)
Opening errorlog failed. Going down.
On 8/21/24 12:46, Stuart Henderson wrote:
On 2024/08/21 12:11, David Colburn wrote:
On 2024/08/21 10:21, David Colburn wrote:
Notes:
1. I've read the manual entry, and multiple threads related to this, more than
On 8/21/24 10:34, Stuart Henderson wrote:
On 2024/08/21 10:21, David Colburn wrote:
Notes:
1. I've read the manual entry, and multiple threads related to this, more than
once.
2. The “chroot location” as defined in /etc/lighttpd.conf. is unchanged -
/var/www
3. Someone suggested,
=> "/server-status" )
#url.redirect = ( "^/wishlist/(.+)" =>
"http://www.123.org/$1"; )
both rewrite/redirect support back reference to regex conditional
using %n
#$HTTP["host"] =~ "^www\.(.*)" {
# url.redirect
ormatting.
On 18 August 2024 21:19:25 David Colburn wrote:
total 0
crw-rw-rw- 1 root wheel 2, 2 Aug 18 10:07 null
On 8/18/24 16:00, Stuart Henderson wrote:
Did you do the mkdir etc? What does ls -l /var/www/dev show?
--
Sent from a phone, apologies for poor formatting.
On 18 August 20
/+REQUIRED_BY
/var/db/pkg/femail-chroot-1.0p3/REQUIRING
On 8/18/24 16:47, Страхиња Радић wrote:
Дана 24/08/16 01:10PM, David Colburn написа:
According to this:
https://www.reddit.com/r/openbsd/comments/nygjdm/lighttpd_cant_find_devnull_on_69/
there's supposed to be a directory here: /usr
total 0
crw-rw-rw- 1 root wheel 2, 2 Aug 18 10:07 null
On 8/18/24 16:00, Stuart Henderson wrote:
Did you do the mkdir etc? What does ls -l /var/www/dev show?
--
Sent from a phone, apologies for poor formatting.
On 18 August 2024 17:01:52 David Colburn wrote:
I removed "nodev&
Good news! I previously reported that various generations of Lenovo X1
Carbon laptops would occasionally hang on waking up from sleep.
I am happy to report that the problem has apparently gone away after
upgrading to OpenBSD 7.5.
Dave
David J. Raymond
david.raym...@nmt.edu
http
1.4.74/src/server.c.1935)
Opening errorlog failed.
On 8/18/24 11:19, David Colburn wrote:
/etc/fstab currently looks like this:
none swap sw
/ ffs rw 1 1
/home ffs rw,nodev,nosuid 1 2
/tmp ffs rw,nodev,nosuid 1 2
/usr ffs rw,nodev 1 2
/usr/X11R6 ffs rw,nodev 1 2
/usr/local ffs rw,wxallowed
,nosuid 1 2
On 8/18/24 10:28, David Colburn wrote:
That's very helpful, thanks!
/var is mounted "ffs rw,nodev,nosuid, 1 2"
/var/www isn't specifically mentioned.
Would it be affected by the /var mount settings?
Thanks again.
On 8/18/24 07:50, Stuart Henderson wrote:
1 - 100 of 1075 matches
Mail list logo
