Any ideas? I'm thinking maybe the root disk is on a bad CF card.
Get/Verify syspatch77-001_nfs.tgz 100%
|*******************************************************| 158 KB
00:00
Installing patch 001_nfs
Get/Verify syspatch77-002_zic.tgz 100%
|*******************************************************| 24992
00:00
Installing patch 002_zic
Get/Verify syspatch77-003_zoneinf... 100%
|****************************************************| 74310 00:00
Installing patch 003_zoneinfo
Get/Verify syspatch77-004_pfsynco... 100%
|****************************************************| 359 KB 00:00
Installing patch 004_pfsyncook
Get/Verify syspatch77-005_acme.tgz 100%
|******************************************************| 39531
00:00
Installing patch 005_acme
Get/Verify syspatch77-006_xserver... 100%
|****************************************************| 4313 KB 00:02
Installing patch 006_xserver
Relinking to create unique kernel... failed!
!!! "/usr/libexec/reorder_kernel" must be run manually to install the
new kernel
# cat /usr/share/relink/kernel/GENERIC.MP/relink.log
(SHA256) /bsd: OK
LD="ld" sh makegap.sh 0xcccccccc gapdummy.o
ld -T ld.script -X --warn-common -nopie -o newbsd ${SYSTEM_HEAD} vers.o
${OBJS}
ld: error: vega20_smumgr.o:(.debug_str): offset is outside the section
*** Error 1 in /usr/share/relink/kernel/GENERIC.MP (Makefile:2435
'newbsd': @echo ld -T ld.script -X --warn-common -nopie -o newbsd
'${SYSTE...)
OpenBSD 7.7 (GENERIC.MP) #0: Sun May 4 11:23:50 MDT 2025
r...@syspatch-77-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4267245568 (4069MB)
avail mem = 4111486976 (3921MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf0000 (39 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date
10/26/2010
bios0: OEM OEM
acpi0 at bios0: ACPI 3.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET MCFG APIC
acpi0: wakeup devices PCI0(S5) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5)
PEX4(S5) PEX5(S5) HUB0(S5) UAR1(S5) UAR2(S5) IGBE(S5) USB0(S3) USB1(S3)
USB2(S3) USB3(S3) USB4(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Atom(TM) CPU D525 @ 1.80GHz, 1800.03 MHz, 06-1c-0a, patch
00000107
cpu0: cpuid 1
edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
ecx=40e31d<SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
cpu0: cpuid 6 eax=1<SENSOR> ecx=1<EFFFREQ>
cpu0: cpuid a vers=3, gp=2, gpwidth=40, ff=3, ffwidth=40
cpu0: cpuid 80000001 edx=20100800<NXE,LONG> ecx=1<LAHF>
cpu0: MELTDOWN
cpu0: 24KB 64b/line 6-way D-cache, 32KB 64b/line 8-way I-cache, 512KB
64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 200MHz
cpu0: mwait min=64, max=64, C-substates=0.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Atom(TM) CPU D525 @ 1.80GHz, 1800.02 MHz, 06-1c-0a, patch
00000107
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins, remapped
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEX0)
acpiprt2 at acpi0: bus 2 (PEX1)
acpiprt3 at acpi0: bus 3 (PEX2)
acpiprt4 at acpi0: bus -1 (PEX3)
acpiprt5 at acpi0: bus -1 (PEX4)
acpiprt6 at acpi0: bus -1 (PEX5)
acpiprt7 at acpi0: bus 4 (HUB0)
acpibtn0 at acpi0: PWRB
acpipci0 at acpi0 PCI0
acpicmos0 at acpi0
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
com1 at acpi0 UAR2 addr 0x2f8/0x8 irq 3: ns16550a, 16 byte fifo
"PNP0303" at acpi0 not configured
com4 at acpi0 UAR3 addr 0x2a0/0x8 irq 5: ns16550a, 16 byte fifo
com4: probed fifo depth: 15 bytes
com5 at acpi0 UAR4 addr 0x2a8/0x8 irq 7: ns16550a, 16 byte fifo
com5: probed fifo depth: 15 bytes
com6 at acpi0 UAR5 addr 0x280/0x8 irq 10: ns16550a, 16 byte fifo
com6: probed fifo depth: 15 bytes
com7 at acpi0 UAR6 addr 0x288/0x8 irq 11: ns16550a, 16 byte fifo
com7: probed fifo depth: 15 bytes
"PNP0C0B" at acpi0 not configured
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
acpitz0 at acpi0
acpitz0: critical temperature is 98 degC
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x02
inteldrm0 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x02
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0: apic 4 int 16, PINEVIEW, gen 3
"Intel Pineview Video" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x04: apic 4 int
16
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x04: apic 4 int
21
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x04: apic 4 int
18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC888
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x04: msi
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel 82583V" rev 0x00: msi, address
00:03:1d:0b:48:fe
ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x04: msi
pci2 at ppb1 bus 2
em1 at pci2 dev 0 function 0 "Intel 82583V" rev 0x00: msi, address
00:03:1d:0b:48:ff
ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x04: msi
pci3 at ppb2 bus 3
em2 at pci3 dev 0 function 0 "Intel 82583V" rev 0x00: msi, address
00:03:1d:0b:49:00
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x04: apic 4 int
23
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x04: apic 4 int
19
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x04: apic 4 int
18
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x04: apic 4 int
23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf4
pci4 at ppb3 bus 4
pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x04
pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x04: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 1: <CF Card>
wd0: 1-sector PIO, LBA48, 7623MB, 15613920 sectors
wd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801HBM SATA" rev 0x04: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 4 int 19 for native-PCI interrupt
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x04: apic 4
int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627DHG-P rev 0x73
lm1 at wbsio0 port 0x290/8: W83627DHG
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (f0d29aa41984a920.a) swap on wd0b dump on wd0b
inteldrm0: 800x600, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using
wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
acpitz0: _AL0[0] _PR0 failed
carp1: state transition: BACKUP -> MASTER
carp1: state transition: MASTER -> BACKUP
