Re: Expanding softraid(4) RAID 5

On Mon, Dec 09, 2024 at 08:50:37PM -, Stuart Henderson wrote: > On 2024-12-09, Bryan Vyhmeister wrote: > > I have a system with 4 3TB hard drives in a softraid(4) RAID 5 array. I > > would like to expand the array to use much larger hard drives. I could > > offline one d

Expanding softraid(4) RAID 5

I have a system with 4 3TB hard drives in a softraid(4) RAID 5 array. I would like to expand the array to use much larger hard drives. I could offline one drive, replace it with a larger drive, and then create a new 'd' RAID partition of the new size (with fdisk(8) and disklabel(8). Then I would in

Re: vxlan(4) Between Three Sites

On Fri, Sep 20, 2024 at 11:24:47AM +1000, David Gwynne wrote: > On Thu, Sep 19, 2024 at 09:48:15AM -0700, Bryan Vyhmeister wrote: > > On Wed, Sep 18, 2024 at 11:17:45AM +1000, David Gwynne wrote: > > Once I realized wg(4) wouldn't work, my solution was to use a gif(4) >

Re: OpenBSD support for Mac Mini M2 ?

On Thu, Sep 19, 2024 at 06:18:25PM -0400, J Doe wrote: > Hi list, > > I see in the FAQ that the Apple Mac Mini M2 is a supported platform[0] > and that the WiFi is supported via: bwfmv(4). I had two questions about > WiFi support: > > 1. Is Host AP mode supported on the Mac Mini M2? The man pag

Re: vxlan(4) Between Three Sites

On Wed, Sep 18, 2024 at 11:17:45AM +1000, David Gwynne wrote: > On Mon, Sep 16, 2024 at 09:57:18PM -0700, Bryan Vyhmeister wrote: > > On Tue, Sep 17, 2024 at 02:31:09PM +1000, David Gwynne wrote: > > > > > > On Mon, Sep 16, 2024 at 12:25:35PM -0700, Bryan Vyhmeister wro

Re: vxlan(4) Between Three Sites

On Tue, Sep 17, 2024 at 02:31:09PM +1000, David Gwynne wrote: > > On Mon, Sep 16, 2024 at 12:25:35PM -0700, Bryan Vyhmeister wrote: > > I am attempting to build a proof of concept of how to use vxlan(4) > > on OpenBSD in a fully meshed OSPF network with [wireless] links > >

vxlan(4) Between Three Sites

I am attempting to build a proof of concept of how to use vxlan(4) on OpenBSD in a fully meshed OSPF network with [wireless] links between sites under my full control so mtu is not an issue (mtu 1550 for vxlan0 and mtu 1600 or higher for hardware interfaces). The goal is to bridge a group of VLANs

Re: u-blox GPS card in Dell Latitude

Thanks to those who responded. I finally have the laptop with the u-blox card installed. It appears as: umodem0 at uhub3 port 1 configuration 1 interface 0 "u-blox AG - www.u-blox.com u-blox GNSS receiver" rev 1.10/4.05 addr 4 umodem0: data interface 1, has CM over data, has no break umodem0: sta

u-blox GPS card in Dell Latitude

I'm looking at purchasing a Dell Latitude rugged laptop that has an option for a u-blox GPS card. It is a fairly expensive option and I am wondering if anyone has been able to get one of these cards to work with ntpd in OpenBSD. I have searched the archives and have not been able to find reports of

Re: ubnt unfi stable from ports doesn??t start with rcctl but as root

On Tue, Jan 08, 2019 at 03:27:39PM +0100, Thomas Huber wrote: > just upgrade the Unifi Controller net/unifi/stable (version 5.8.30) from > ports. > The controller service doesn??t start wit rcctl(8) but works fine when > running as root. > My guess is that _unifi is not allowed to start monogd but

Re: join id cannot be integer

On Wed, Aug 08, 2018 at 05:43:08PM +0200, Stefan Sperling wrote: > join and nwid are mutually exclusive commands. Apparently I did not read the join info properly. Thanks for the clue stick and sorry for the noise. Bryan

join id cannot be integer

I have not investigated the full scenario here but using the new join option for wireless network configuration does not seem to work if I use an ID of 0, 1, or 2 and probably others. Is this expected? The man page seems to indicate that this should work fine. From ifconfig(8): "The id can either

Re: Stockholm anoncvs rsync mirror not updating

This is probably due to the Hackathon from July 8-13 and that at least some developers are probably still traveling. Snapshots are often not built for public use during that time from my observation but it is unusual for cvs changes to not be fanning out to the mirrors. Perhaps some maintenantce is

Re: Configuration of a umb device

On Mon, Jul 09, 2018 at 12:37:42AM +, salan...@ouvaton.org wrote: > Could someone direct me as to how to set up my computer such that I can > get internet access through? I installed a this model of US Mobile SIM card. > https://www.usmobile.com/shop/product/Triple-Cut-GSM-SIM-Card > > Then I

Re: 4k display on integrated Intel graphics?

On Fri, Jun 29, 2018 at 11:04:12PM +0200, Maximilian Pichler wrote: > Thanks for explaining. Some shaking could be lived with... I went ahead and bought a Plugable USB-C to DisplayPort cable to confirm that there are no issues. I unplugged my mDP to DP cable from the NUC6i7KYK and the HP Z27s 3840

Re: 4k display on integrated Intel graphics?

On Fri, Jun 29, 2018 at 06:01:06PM +0200, Maximilian Pichler wrote: > Does this mean it's unlikely to work with an USB-C-to-DP adapter or > just hasn't been tried? It should work fine because the USB-C ports have DisplayPort signaling built-in and I would not expect any issues. https://www.displa

Re: FAQ: dmesg archive

Looking at Supermicro's page, it's pretty easy to get some answers. http://www.supermicro.com/products/system/Mini-ITX/SYS-E300-9A-8CN8.cfm The 4 gigabit Intel i350-AM4 controllers should work fine since they do on other systems of the previous C2xxx systems. However, the 4 gigabit Marvell 88E154

Re: Ubiquiti Networks EdgeRouter 6P

On Fri, May 25, 2018 at 06:43:57PM +, Chris Jones wrote: > I see that the Ubiquiti EdgeRouter 6P is supported under octeon port. > Just wondering if anyone on the list is running OpenBSD 6.3 or current > on the EdgeRouter 6P? I'm mainly interested in the performance of this > unit as a home fir

Re: gcc-4.9.4 package build signal 11 [Segmentation fault] on Ubiquiti Unifi Security Gateway

I have had a few discussions with visa@ about builds on OpenBSD/octeon. For ports builds, 1GB of memory like in the EdgeRouter 4 and 6 is too little to build big things like gcc which is required for quite a few things. The EdgeRouter Lite, EdgeRouter PoE, and USG are even worse with 512MB of memor

Re: AMD Pro A10/A12 Radeon R7 Support

On Tue, Jan 23, 2018 at 02:51:37PM +1100, Jonathan Gray wrote: > The GCN parts like the 7750 (Cape VERDE) 7870 (PITCAIRN) will use > the radeon xorg driver but will not have acceleration until the userland > parts are sorted out which involves changing how LLVM is built, adding > additional depende

Re: AMD Pro A10/A12 Radeon R7 Support

On Tue, Jan 23, 2018 at 11:57:35AM +1100, Jonathan Gray wrote: > On Mon, Jan 22, 2018 at 10:43:03AM -0800, Bryan Vyhmeister wrote: > > I have been looking at the new Lenovo ThinkPad A275 which is much like > > the X260/X270 but with AMD Pro A10 or A12 chip and graphics. I am &g

AMD Pro A10/A12 Radeon R7 Support

I have been looking at the new Lenovo ThinkPad A275 which is much like the X260/X270 but with AMD Pro A10 or A12 chip and graphics. I am interested in looking at something other than Intel for the first time in more than a decade. I am interested in radeondrm(4) support for any of the options avail

Re: iwm0 can't load firmware AC-3168

On Mon, Nov 13, 2017 at 08:55:36PM +, Stuart Henderson wrote: > On 2017-11-13, Bryan Vyhmeister wrote: > > On Mon, Nov 13, 2017 at 11:08:32AM -0800, Sha'ul wrote: > >> Running 6.2-release, after install rebooted and got iwm0 firmware from > >> re0. Now can no

Re: iwm0 can't load firmware AC-3168

On Mon, Nov 13, 2017 at 11:08:32AM -0800, Sha'ul wrote: > Running 6.2-release, after install rebooted and got iwm0 firmware from > re0. Now can not load firmware. If this makes a difference, Intel graphics > 620 only gives me a black screen, no kernel panic, and system seems to > hang when I manual

Re: Helping out

On Tue, Aug 01, 2017 at 08:19:23PM -0400, Radoslav_Mirza wrote: > Dear Group, Are there any places to start helping out for a beginner? > Any junior jobs or todo lists? > > I have a new Ryzen 1700 running OpenBSD so maybe I could help with > some benchmark tests etc. > > Any pointers of where to

Re: touchpad input driver: testing needed

On Tue, Aug 01, 2017 at 10:12:05PM +0200, Ulf Brosziewski wrote: > I have the impression that multi-finger clicks are popular > among Mac users, is it correct? However, if the new driver > works it should offer software button areas at the bottom > edge of the touchpad, as elsewhere. Are they mis

Re: touchpad input driver: testing needed

On Mon, Jul 31, 2017 at 05:37:00PM -0700, Bryan Vyhmeister wrote: > On Mon, Jul 31, 2017 at 08:09:31PM -0400, Ted Unangst wrote: > > Bryan Vyhmeister wrote: > > > On Mon, Jul 31, 2017 at 11:02:28PM +0200, Ulf Brosziewski wrote: > > > > for you. As always, a dmesg wou

Re: touchpad input driver: testing needed

On Mon, Jul 31, 2017 at 11:02:28PM +0200, Ulf Brosziewski wrote: > for you. As always, a dmesg would be appreciated. The output of > # wsconsctl | grep 'mouse' > could also be of interest here (you must run it as root). Here is another report from a Lenovo N22. This system has a Synaptics to

Re: touchpad input driver: testing needed

On Mon, Jul 31, 2017 at 08:09:31PM -0400, Ted Unangst wrote: > Bryan Vyhmeister wrote: > > On Mon, Jul 31, 2017 at 11:02:28PM +0200, Ulf Brosziewski wrote: > > > for you. As always, a dmesg would be appreciated. The output of > > > # wsconsctl | grep 'mouse&

Re: touchpad input driver: testing needed

On Mon, Jul 31, 2017 at 11:02:28PM +0200, Ulf Brosziewski wrote: > for you. As always, a dmesg would be appreciated. The output of > # wsconsctl | grep 'mouse' > could also be of interest here (you must run it as root). This report is from a MacBookAir7,2 which is a 2015 13-inch MacBook Air.

Re: touchpad input driver: testing needed

On Mon, Jul 31, 2017 at 11:02:28PM +0200, Ulf Brosziewski wrote: > for you. As always, a dmesg would be appreciated. The output of > # wsconsctl | grep 'mouse' > could also be of interest here (you must run it as root). Here is another report. This one is from a Lenovo LaVie Z with an Elante

Re: touchpad input driver: testing needed

On Mon, Jul 31, 2017 at 11:02:28PM +0200, Ulf Brosziewski wrote: > for you. As always, a dmesg would be appreciated. The output of > # wsconsctl | grep 'mouse' > could also be of interest here (you must run it as root). This is from a Lenovo ThinkPad X1 Carbon (4th Gen) which has a Synaptics

Re: 6.1 dhcpd

On Tue, Apr 18, 2017 at 11:01:47AM +0200, Bastien Durel wrote: > Since I upgraded to 6.1, my printer does not get its IP from dhcpd > anymore. > > Printer is a xerox phaser 6022. > > dhcpd gets dhcp requests and reponds to it (I've show packets with > tcpdump, and here are the logs) I am seeing

Re: OpenBSD 6.1-snapshot boot issues in bhyve

On Wed, Apr 05, 2017 at 12:46:27PM +1000, Jason Tubnor wrote: > Just wondering if anyone else is seeing the same issue I am booting a > 6.1-snapshot in bhyve? In preparation for the 6.1 pending release, I > have tried to spin up 6.1-snap to iron out any issues in bhyve but I > don't get very far in

Re: Hardware recommendations for compact 1U firewall

On Thu, Dec 15, 2016 at 02:04:04PM -0800, OpenBSD lists wrote: > I recently replaced a pair of Soekris 6501's (BIOSes on both went blank) > with some SuperMicro X11SBA-LN4F-O boards, SATA-DOM-064s, the CSE505-203B > and 4 GB 1600 Mhz DRR3 sticks. > > Draws so little power that it looks like the Po

Re: Hardware recommendations for compact 1U firewall

On Thu, Dec 15, 2016 at 07:51:40PM +0100, Hrvoje Popovski wrote: > On 15.12.2016. 12:30, Stuart Henderson wrote: > > If you want to cut down on weight+noise at the expense of more cost > > and a less powerful cpu, maybe APU2 in a 1U case or something like > > supermicro SYS-5018A-FTN4. > > has any

Re: CARP, BGP and OpenBSD routers - integration tips/suggestions needed

On Sun, Dec 11, 2016 at 09:45:08AM +, Bob Jones wrote: > I have a planned network topology that will run on OpenBSD that (at > the moment) will constitute of three boxes : > > 1 x Router (Openbsd running bgpd for connection to the outside world) > 2 x Firewalls (running Openbsd) > > I can't q

Re: HP Proliant MicroServer G8: not seeing disks [solved]

On Sat, Dec 03, 2016 at 02:21:15PM +0100, Stephane HUC "CIOTBSD" wrote: > Hi Stuart. > > What microserver would you recommend?! > > Le 12/03/16 ? 12:08, Stuart Henderson a ?crit : > > On 2016-12-02, Peter N. M. Hansteen wrote: > >> My only complaint is that due to the maze of twisty nonsense tha

Re: Lenovo Yoga 2 11

On Tue, Dec 06, 2016 at 09:30:06AM +0800, Denny White wrote: > Trying to find out if anyone has had any luck with OBSD on a Lenovo > Yoga 2 11 or anything close to that model in the Yoga line. I got it > to boot off usb using amd64 iso due to the Yoga using UEFI. I > hadn???t ran OBSD in quite a w

Re: FAQ update

On Mon, Dec 05, 2016 at 09:12:49AM -0800, Todd Carpenter wrote: > Next, create the mirror with the bioctl(8) > command. > > # *bioctl -c 1 -l sd0a,sd1a softraid0* > > > *Thats good, but the next part shows* > > > # *bioctl -c C -l sd0a softraid0* > New passphra

Re: Logic Supply Nuvo-5000 / Intel Q170 Chipset

On Tue, Nov 29, 2016 at 03:10:10PM -0600, Joe Crivello wrote: > Does anyone out there on the list have experience with the Intel Q170 > chipset on OpenBSD 6.0? > > We are looking into using the Logic Supply Nuvo 5000LP ( > http://www.logicsupply.com/nuvo-5000lp/#specs) as a high performance router

Re: umb(4) connection issues

On Wed, Nov 23, 2016 at 08:37:04PM +0100, Ingo Feinerer wrote: > Indeed, it works for me when an appropriate (default) route is manually > added and the listed DNS entries are manually set in /etc/resolv.conf. I forgot to mention about DNS. The script I came up with just grabs the values from the

Re: umb(4) connection issues

On Tue, Nov 22, 2016 at 06:14:28PM +0100, Ingo Feinerer wrote: > --8<- > umb0: flags=8851 mtu 1500 > index 5 priority 0 llprio 3 > roaming disabled registration home network > state up cell-class custom

Lenovo IdeaPad N22 OpenBSD Report

I just picked up an inexpensive Lenovo IdeaPad N22 from their outlet store and found that it runs OpenBSD quite nicely. It cost me $185 delivered to my door. I picked up another inexpensive Lenovo system last year and it was a terrible experience. This is a Braswell based system with a Celeron N305

Re: AMD graphics adapter hcl

On Fri, Sep 09, 2016 at 02:44:33AM +1000, Jonathan Gray wrote: > > Am I understanding that using a newer, say Radeon HD 7750 or HD 7870 > > card, with the modesetting(4) Xorg driver would work as long as there is > > kernel support (which there is)? That would obviously not allow for > > 2d/3d acce

Re: AMD graphics adapter hcl

On Fri, Sep 09, 2016 at 02:17:03AM +1000, Jonathan Gray wrote: > The LLVM in the tree will not be installed as libraries suitable > for Mesa initially. > > I'm not aware of anyone working on updating radeondrm at the moment > and doing so for basic modesetting support is not tied to LLVM. > 2d/3d

Re: AMD graphics adapter hcl

On Wed, Sep 07, 2016 at 06:35:26PM +0200, Simon Mages wrote: > can somebody tell me which AMD graphics adapters are supported by the > OpenBSD kernel? > > radeon(4) has a very big list of supported adapters or chip families. > I greped a bit in /usr/src/sys/dev/pci/drm/radeon to see which ones > a

Re: Driving 4k Display for OpenBSD Workstation

I neglected one solution to having a 4k Display with OpenBSD. I was reading about Haswell and 4k in context of the Mac mini which uses a low power series of processors that do not support 4k at 60 Hz. The regular Haswell chips like the Xeon E3 1275 v3 I am using now, do support 4k at 60 Hz using Di

Re: Driving 4k Display for OpenBSD Workstation

On Fri, Jul 22, 2016 at 02:05:07PM +1000, Jonathan Gray wrote: > There is no kernel support for skylake and it will require firmware. > https://01.org/linuxgraphics/intel-linux-graphics-firmwares > > The intel code in Mesa does not use gallium or LLVM. > > Using efifb with a 4k display would like

Re: Driving 4k Display for OpenBSD Workstation

On Fri, Jul 22, 2016 at 01:25:58PM +1000, Jonathan Gray wrote: > There is kernel support for TAHITI/PITCAIRN/CAPE VERDE southern > islands but no userland acceleration as both 2d and 3d acceleration > require LLVM. > > The marketing names are a mess, see > https://www.x.org/wiki/RadeonFeature/ > t

Re: Driving 4k Display for OpenBSD Workstation

On Thu, Jul 21, 2016 at 10:27:18PM +0300, li...@wrant.com wrote: > Thu, 21 Jul 2016 11:45:01 -0700 Bryan Vyhmeister > > My goal for this project is to have an OpenBSD workstation (I run > > -current) built around 4k displays. > > Short answer from user level: I'd person

Driving 4k Display for OpenBSD Workstation

My goal for this project is to have an OpenBSD workstation (I run -current) built around 4k displays. I have a Dell P4317W 4k display on order and I am going to order a couple of other 4k displays as well. I have a Radeon HD 6870 Eyefinity 6 card which should be supported by radeondrm(4) but it doe

Mac mini acpiec(4) panic with Unsupported RegionSpace

I have two different Macmini7,1 systems (the late 2014 and most recent Mac mini model). On one of them, I was using OpenBSD -current in April but haven't used the system or upgraded it to a newer snapshot. I purchased another similar system and went to install OpenBSD -current on it from the June 2

Re: pf changes port on udp nat-to and rdr-to reply packets (RTP stream)

On Thu, Jun 9, 2016, at 10:48 AM, Markus Wernig wrote: > Short question: > How do I prevent pf from changing the source port of outgoing > natted udp > packets? Did you look at static-port in pf.conf(5)? Bryan

Re: MacBook 9,1 or 8,1

On Wed, Apr 27, 2016, at 12:53 PM, Joerg Jung wrote: > On Wed, Apr 27, 2016 at 09:41:50AM -0400, Bryan Everly wrote: > > > > Has anyone had success with either of the new 12" Retina MacBooks? My > > search of marc.info came up empty. > > I own a MacBook8,2 and efiboot as well as inteldrm graphic

Re: umsm(4) for Sierra Wireless EM7455 in ThinkPad X260

On Wed, Apr 20, 2016 at 08:15:34PM +0200, David Coppa wrote: > On Wed, Apr 20, 2016 at 5:28 PM, Bryan Vyhmeister > wrote: > > On Wed, Apr 20, 2016 at 11:12:04AM +0200, David Coppa wrote: > >> It's a MBIM (Mobile Broadband Interface Model) device: > >&

Re: umsm(4) for Sierra Wireless EM7455 in ThinkPad X260

On Wed, Apr 20, 2016 at 11:12:04AM +0200, David Coppa wrote: > On Wed, Apr 20, 2016 at 10:40 AM, Stuart Henderson > wrote: > > On 2016-04-20, Bryan Vyhmeister wrote: > >> I recently purchased a Lenovo ThinkPad X260 and I decided to also order > >> the Sierra Wi

umsm(4) for Sierra Wireless EM7455 in ThinkPad X260

I recently purchased a Lenovo ThinkPad X260 and I decided to also order the Sierra Wireless EM7455 LTE Wireless WAN device installed as well. I was hoping it might work easily with umsm(4) but that does not appear to be the case. Based on the output of usbdevs -vv, I added the EM7455 product ID (0x

Re: ThinkPad X260 or other Skylake Laptop

On Wed, Mar 30, 2016 at 12:15:05AM +1100, Jonathan Gray wrote: > On Tue, Mar 29, 2016 at 02:50:26PM +0200, Stefan Sperling wrote: > > On Mon, Mar 28, 2016 at 05:04:02PM -0700, Bryan Vyhmeister wrote: > > > Is there a way screen brightness can still be adjusted in some > >

Re: (2nd) Syntax error with pf rules

On Tue, Mar 29, 2016, at 10:26 AM, Adam Smith wrote: > set debug urgent > > comes with the following error message: > > pfctl: unknown debug level "urgent" > /etc/pfcustom.conf 13: error setting debuglevel "urgent" > pfctl: Syntax error in config file: pf rules not loaded. Although you didn't spe

ThinkPad X260 or other Skylake Laptop

I am considering purchasing a ThinkPad X260 for OpenBSD use. I am aware that inteldrm(4) does not yet support Skylake chips (Broadwell support is not perfect yet either). I presume wsfb(4) should work decently at least but I am wondering if anyone currently has an X260 and is using it for OpenBSD.

Re: vfs_syscalls.c PLEDGE_DPATH undeclared

Thanks to those that responded to this message off-list. The problem was indeed that my src tree was corrupt probably as a result of a botched cvsync of my private anoncvs mirror from a cvsync mirror that is currently down. I'm currently syncing my mirror from another cvsync mirror to restore its f

vfs_syscalls.c PLEDGE_DPATH undeclared

I'm running the latest snapshot pretty much each day and then compiling my own kernel and userland to enable vmm and, for a few days now, kernel compilation fails with these errors. I believe userland failed to build as well but I didn't continue since I did not want mismatched kernel and userland.

Re: OpenBSD 5.8 on VMware 5.5

On Wed, Dec 02, 2015 at 02:40:48PM -0200, Felipe Gomes wrote: > I'm kinda worried with the performance: the host is a Dell R815 4 CPU > Opteron 6136 / 64GB. There are no other VMs at the moment, just a single > stance of OpenBSD 5.8 installed, 4 virtual CPUs, 8 GB RAM. > > I've already enabled sof

Re: A branded USB stick as an alternative to the CD set?

On Mon, Nov 30, 2015 at 06:20:02PM -0700, Bal??zs Nagy wrote: > On Nov 30, 2015, at 2:34 PM, Theo de Raadt wrote: > > > > These days the CD revenue is about what a cashier at a store makes. > > I'm sick to my stomack when I read this. I won't get into how unjust, > unfair, unethical this situatio

Re: A branded USB stick as an alternative to the CD set?

Let's not waste any more of Theo's time. USB sticks are not the magic device that some seem to think. Some are not very reliable and prone to failure. I've had very mixed results with budget USB sticks in particular. Going with a more expensive USB stick like a major brand name *usually* turns out

Re: athn0: device timeout

On Sat, Nov 28, 2015 at 09:24:23AM -0700, bluesun08 wrote: > ok, now i tested my adapter on > a) another machine > b) another usb port. > > Result: The adapter don't work on a) and don't work on b). > > Is there any other Wifi-USB-adapter which work reasonably reliable on > OpenBSD in HostAP mod

xbacklight(1) not functional on MacBookAir7,2

I've posted several times about the MacBookAir7,2 (2015 Broadwell) and how it's working fairly well. One thing that is not working is xbacklight(1) to change the screen brightness. The similar MacBookAir6,1 (2013/2014 Haswell) works perfectly with xbacklight(1). What I'm mostly wondering is if this

Re: MacbookPro 11,1

On Thu, Nov 26, 2015 at 09:00:48AM +0100, Joerg Jung wrote: > Can you send a dmesg for this Air7,2 please? Here's my dmesg from today's snapshot for the MacBookAir7,2. Bryan OpenBSD 5.8-current (GENERIC.MP) #1667: Thu Nov 26 08:27:08 MST 2015 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd

Re: MacbookPro 11,1

On Thu, Nov 26, 2015 at 12:02:18AM +0100, Joerg Jung wrote: > The problem with the MacBook8,1 is the USB trackpad/keyboard is connected > via SPI internally. No SPI driver in OpenBSD. > Moreover, the internal SSD is connected via NVMe, also not supported. > > Also, both seem not really working in

Re: MacbookPro 11,1

On Tue, Nov 24, 2015 at 05:17:56PM -0500, Bryan C. Everly wrote: > The rsu driver I'm using as an external USB network adapter appears to be a > bit flaky on this hardware (dropping packets and connections entirely > sometimes) so that's been a barrier as well necessitating multiple retries > of pk

Re: WLAN Card AP feature

On Tue, Nov 24, 2015 at 12:20:31PM -0700, bluesun08 wrote: > In FreeBSD there is the command "ifconfig list caps". This displays > the adaptor's capabilities, including the operating modes supported. > > 1) Is there a similar command in OpenBSD? See "ifconfig media" for some of that information

Re: MacbookPro 11,1

On Mon, Nov 23, 2015 at 06:28:04PM -0500, Bryan Everly wrote: > I only had to bless my thumb drive so the keyboard worked. Everything > else is native when booting from the hard drive afaik. Very good. I didn't think about "blessing" the thumb drive. Good idea. Bryan

Re: MacbookPro 11,1

On Mon, Nov 23, 2015 at 04:20:56PM -0500, Bryan C. Everly wrote: > The /usr/sbin/bless command was the key that unlocked this for me. I have > managed to get the latest snapshot installed and booting on this machine. > I'm in the process of installing a desktop (I run gnome) so I'll let you > know

Re: MacbookPro 11,1

On Mon, Nov 23, 2015 at 09:22:04AM -0500, Bryan C. Everly wrote: > I tried a few months ago to boot this into OpenBSD and one of the big > problems I ran into was that this is a USB 3 only machine and as such, the > keyboard worked at the boot prompt but did not work when I got to the first > insta

Re: inteldrm(4) display corruption on MacBook

Thanks so much for that commit. The system boots up and has a very brief moment of display corruption before it switches to inteldrm(4) and works perfectly. This works on both my 2013 MacBook Air (Haswell HD 5000 graphics)) and 2015 MacBook Air (Broadwell HD 6000 graphics). I haven't had a chance t

Re: inteldrm(4) display corruption on MacBook

I just tested a 2015 MacBook Air (HD 6000 graphics) and still see the same display corruption. This seems to happen on all Intel Graphics Macs at least from HD 4000 and up and specifically your system, the 12-inch Retina MacBook, 2013 MacBook Air, and 2015 MacBook Air. Hopefully kettenis@ will have

Re: (U)EFI install and boot not finding hd0a:/bsd

On Tue, Nov 3, 2015, at 10:34 AM, YASUOKA Masahiko wrote: > > Wonderful! I rebuilt my BOOTX64.EFI and installed it to the EFI boot > > partition and the MacBook Air finds the kernel perfectly. The EFI boot > > no longer shows anything other than hd0 as I would expect. No more fd0 > > or errors abou

Re: (U)EFI install and boot not finding hd0a:/bsd

On Tue, Nov 3, 2015, at 03:23 AM, YASUOKA Masahiko wrote: > I fixed the problem with the booted device on cvs repository. > Thank for your report. > > > Is this something unique to Apple hardware or is this something that > > all (U)EFI installs have trouble with? > > efiboot had used a protocol

Re: Missing libcrypto file in -current

On Mon, Nov 2, 2015, at 07:47 PM, Ted Unangst wrote: > The version of libcrypto recently changed, but the snapshot was built > with the old file list, so it wasn't included. until next time... Thank you. That confirmation is very much appreciated. Bryan

Re: Missing libcrypto file in -current

On Mon, Nov 2, 2015, at 06:10 PM, Dutch Ingraham wrote: > Hi all: > > I just installed 5.8 on the x86_64 arch. Immediately after installing, > I upgraded to -current. Upon rebooting into the new -current, a number > of errors appeared in the dmesg after the network started. The first > error was

Re: (U)EFI install and boot not finding hd0a:/bsd

On Mon, Nov 2, 2015, at 01:53 AM, Sevan / Venture37 wrote: > With miniroot58.fs can't boot and if I use the traditional media with > BIOS support, I have to keep on pressing a key on my keyboard to > prevent the screen from going to sleep so everything is a little > frantic. Interesting. I booted

Re: (U)EFI install and boot not finding hd0a:/bsd

On Sun, Nov 1, 2015, at 04:18 PM, Sevan / Venture37 wrote: > On 1 November 2015 at 18:09, Bryan Vyhmeister > wrote: > > Perhaps this is related to something else but on my 2013 MacBook Air > > with an OpenBSD-only EFI install, boot fails to attempt booting from > > hd0

(U)EFI install and boot not finding hd0a:/bsd

Perhaps this is related to something else but on my 2013 MacBook Air with an OpenBSD-only EFI install, boot fails to attempt booting from hd0a:/bsd but instead tries fd0a:/bsd several times. I tried adding /etc/boot.conf with boot hd0a:/bsd in both sd0i (the EFI boot partition) and sd0a. Is this so

Re: EFI Install on 2013 MacBook Air and Display Corruption

After the additional commits by Mark Kettenis here: http://marc.info/?l=openbsd-cvs&m=144620412406055&w=2 I still have the same errors. The dmesg from today looks the same (link here and inline below): http://www.bsdjournal.net/files/macbookair/dmesg.20151030.txt Thanks again. Bryan OpenBSD

EFI Install on 2013 MacBook Air and Display Corruption

I figured I would follow the post by jasper@ about doing a (U)EFI install and apply it to a 2013 11-inch MacBook Air I have. On yesterday’s snapshot of amd64, everything boots up with GENERIC.MP right up to the login screen which is better than I have been able to achieve with BIOS emulation and a

Re: Request for Funding our Electricity

On Wed, Jan 15, 2014 at 07:41:03PM +0100, Martin Schröder wrote: > Him being the leader is the very reason this project still exists. The thing about OpenBSD is that it has a very clear and strong focus. This comes from clear and strong leadership. Is Theo right on everything? Of course not. None

Re: low-power/small form factor server (supermicro X9SCL-F w Core i3-3220T)

On Thu, Nov 21, 2013 at 12:57:06AM -0500, Ted Unangst wrote: > machine hangs and such. you will figure out if you're affected or not > pretty quickly. :) cause unknown. Good to know. I'll try it out and see what happens. Thanks. Bryan

Re: low-power/small form factor server (supermicro X9SCL-F w Core i3-3220T)

On Wed, Nov 20, 2013 at 10:16:05PM -0500, Ted Unangst wrote: > The ipmi driver is disabled by default because it does bad things on > some systems. If you don't go out of your way to enable it, the not > configured line is all you'll see. Thanks for the clarification. I wasn't aware of that. What

Re: low-power/small form factor server (supermicro X9SCL-F w Core i3-3220T)

On Wed, Nov 20, 2013 at 05:38:33PM -0800, Paul B. Henson wrote: > I managed to escalate the integrated graphics question high enough to > find somebody who knew what they were talking about, he said, as you > confirmed, that they work fine with this motherboard other than that > you cannot use the

Re: low-power/small form factor server (supermicro X9SCL-F w Core i3-3220T)

On Wed, Nov 20, 2013 at 01:31:23PM -0800, Paul B. Henson wrote: > Hmm, I guess I was actually looking at the SuperServer 5017C-LF page: > > http://www.supermicro.com/products/system/1U/5017/SYS-5017C-LF.cfm > > It has the X9SCL-F motherboard, a similar chassis with a 200w power supply, > and indi

Re: low-power/small form factor server (supermicro X9SCL-F w Core i3-3220T)

On Wed, Nov 20, 2013 at 12:26:49PM -0800, Paul B. Henson wrote: > With the 200W power supply in the small form factor chassis, > supermicro says the max processor TDP supported by the motherboard is > 45w. I guess if you put one in that potentially uses greater power but > never push it to do so it

Re: Looking for a laptop in the Toronto area

On Wed, Oct 30, 2013 at 05:33:56PM -0700, Dag Richards wrote: > Theo de Raadt wrote: > >But really, those of you are telling him that are MISSING THE POINT > >ENTIRELY. > > Oh time to help is it? > Where to send the cheque? I'm sending $500 so we can get this done. Details are here in case anyon

Re: low-power/small form factor server (supermicro X9SCL-F w Core i3-3220T)

On Tue, Nov 19, 2013 at 07:45:46PM -0800, Paul B. Henson wrote: > I'm looking at the supermicro X9SCL-F motherboard which has an Intel > C202 PCH chipset and 2 gigabit interfaces (Intel 82579LM and 82574L), > combined with a Core i3-3220T, stuffed in a 510T-203B chassis. I have lots of X9SCL-F, X9

Re: Best OpenBSD cloud hosting?

On Mon, Oct 21, 2013 at 05:57:32AM -0400, Jiri B wrote: > please put info about your testing public. I suppose more people would > be interested. I certainly will. I will write everything I find up in an article. Thank you. Bryan

Re: Best OpenBSD cloud hosting?

On Sun, Oct 20, 2013 at 11:13:51PM +0200, Antoine Jacoutot wrote: > I am often unable to properly shutdown OpenBSD VMs, disks hang. Using > virtio or not does not change that. I did not look into it very > deeply yet so ... But I never saw this issue in Linux KVM. Thank you for your response. I'

Re: Best OpenBSD cloud hosting?

On Wed, Oct 09, 2013 at 08:45:37PM +0200, Antoine Jacoutot wrote: > I personally use SmartOS and while it is an awesome system, OpenBSD > does not always behave perfectly well under Solaris KVM. I've had > several vdisk related issues. In my experience, Linux KVM is a better > container for our O

Re: OT: SuperMicro X9SBAA-F with OpenBSD

On Fri, Oct 04, 2013 at 03:22:54PM -0700, Chris Cappuccio wrote: > I accidentally got some supermicro boards with IPMI. Not sure why > but under OpenBSD the IPMI freaks out crazy all the time. Probably > wants to use some memory OpenBSD already uses or some shit. I just ignore > the blinking light

Re: Hard Freeze with Snapshots After Aug 19 on ThinkPad X1 Carbon

On Thu, Sep 19, 2013 at 01:28:08AM -0400, Gabriel Guzman wrote: > Ok, been awhile, but I'm definitely still getting some freezes. I'm > unable to get a ddb report though as it seems that the kernel hasn't > actually crashed. It's a bit of a strange problem, and I'm at a loss > as to how to provi

Re: Intel I210 ethernet card support

On Aug 10, 2013, at 6:10, Jonathan Gray wrote: > The i210/i211 chips aren't supported yet. The i217/pch_lpt found > in the Lynx Point/Haswell PCH isn't either. I don't think any of > the usual suspects have hardware yet. Do those that need the hardware have it yet? If not, what's needed? The

  1   2   3   >