On Mon, Jul 31, 2017 at 05:37:00PM -0700, Bryan Vyhmeister wrote: > On Mon, Jul 31, 2017 at 08:09:31PM -0400, Ted Unangst wrote: > > Bryan Vyhmeister wrote: > > > On Mon, Jul 31, 2017 at 11:02:28PM +0200, Ulf Brosziewski wrote: > > > > for you. As always, a dmesg would be appreciated. The output of > > > > # wsconsctl | grep 'mouse' > > > > could also be of interest here (you must run it as root). > > > > > > This report is from a MacBookAir7,2 which is a 2015 13-inch MacBook Air. > > > Anything more than a regular click is not working as can be seen from > > > the wsconsctl output. I was using synclient to configure previously > > > which did allow the other settings. > > > > Can you also share your synclient settings? > > Sure. I was using synclient(1) with the following settings but > synclient(1) no longer works with this driver. > > synclient ClickFinger2=2 ClickFinger3=3 PalmDetect=0 PalmMinWidth=4 > PalmMinZ=100
I wanted to clarify this for the record. Regular click is working fine as is two finger scrolling on the MacBook Air. What is not working is multi-finger click but that is not currently part of the driver which is probably why my synclient settings are significant. I noticed this on the MacBook Air because there are no separate touchpad buttons as there are on everything else I tested. I would love to see multi-finger click as part of the driver since it is essential on any touchpad without separate buttons which seems to be the more common scenario these days for laptops. Thanks again. Bryan
